Tejar 2BBCQ-ALEXA Remote Control Instruction Manual
- May 15, 2024
- TEJAR
Table of Contents
Instruction Manual
Technical Details
Product Information
Use responsibly , Read all instructions and safety information before use.
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC
SHOCK, OR OTHER INJURY OR DAMAGE
Maintaining Your Amazon Fire TV Alexa Voice Remote DO not drop throw,
disassemble, crush,bend puncture,or paint your Amazon Fire
TV Alexa Voice Remote and take care not to spill any food or liquid on your
remote , If your remote does get wet, use rubber gloves to remove the
batteries and wait for the remole to dry completely before re-inserting the
batteries. Do not attempt o dry your remote with an external heat source, such
as a microwave oven or hair dryer. Clean the remote with a soft cloth and
avoid using liquids o harsh chemicals that may damage the remote, be careful
not to wipe it with anything abrasive. Store your remote in cool, dust-free
ere as out of direct sunlight. Batteries “This product contains alkaline
batteries. The remote requires bateries for use. Only use new 1.5V alkaline or
1.2 NiMH rechargeable AAA sized
batteries. Never mix old and new batteries. Keep all of the batteries out of
the reach of children. Do not open disassemble, puncture, cut, bend, burns.
Remove all batteries if they are worn out or before storing your Amazon Fire
TV remote for an extended period of time. Dispose of all batteries in
accordance with applicable laws and regulations and do not dispose of
batteries by throwing them into a fire. If any batteries begin to leak,take
steps (o prevent the flid from coming into direct contact with skin or clothes
as the fluid could be corrosive compartment in accordance with the battery
manufacturer’s recommendations. Servicing your Device 1f you Amazon Fire TV
Alexa Voice Remote needs service please contact Amazon Customer Service.
Contact details can be found at Other Safety Considerations Engaging in
repeitive motions such as pressing buttons or playing
Set up your Alexa Voice remote
- Insertincluded AAA batteries Remove the battery door and insert batteries into your Fire TV Alexa Voice remote (2nd Generation)
- Pair the remote with your Fire TV Device You must pair your new remote to your Amazon Fire TV.
Choose the applicable pairing instructions from the options below.
Ifthis is a replacement remote and you do not have.
the original remote that came with your Fire TV:
- Restart your Amazon Fire TV by unplugging the power cable from your power outlet then plugging it back in. After the Amazon Fire TV Home screen displays,your remote should be ready for use . If not, move to step 2
- Press and hold the Home button on the new remote for atleast 10 seconds. The LED on the remote will slowly flash amber Continue holding down the Home button until the LED starts to rapidly flash. A notification will display on your screen indicating that your remote is successfully paired.
If this remote is in addition to the remote that came Fire TV prior 1o setting up your new remote, please make sure you have your “old” remote handy your
- 0n your “new” remote ,press and hold the Home button for 10 seconds. The indicator LED will slowly flash amber for 10 seconds, then flash faster when your remote is ready to connect You must use your *old” remote for the following step.
- Press the Home button. Navigate to Settings located at the top of the screen, then select Controllers & Bluetooth Devices > Amazon Fire TV Remotes > ADD New Remote.
- Your Fire TV will search for remotes it can connect with, then display them in a list.
- Using your “old” remote select the “new” remote from the list. You will see an on-screen message when it has been successfully paired. You can now use your new Fire TV remote.
‘some games may cause you to experience occasional discom for in your hands,
arm shoulders, neck, or other parls of your body. Small parts. contained in
your device or included with it may present a choking hazard to small
children.
FCC Complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference.
and (2) this device must accept any interference received including
interference that may cause undesired operation.
NOTE: This equipmrt has been tested and found to comply with the. limits
for a Class B digital device ,pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, f not installed and used in accordance
with the instructions, may cause harmful interference to radio communications,
However there is no quarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and
onthe user s encouraged to try to correct the interference by one o more of
the following measures:
– Reorient or relocate the receiving antenna,
– Increase the separtion between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help. The
output power of the radio technology used in the Products is below the radio
frequency exposure limits set by the FCC.Never theless, itls advised to use
the Products in such a manner that minimizes the potential for human contact
during normal operation. Change or modifications that are not expressly
approved by the manufacturer could void the use’s authority to operate the
equipment.
RF Exposure
Tips
If the new remote does not connet, remove and reinsert the batteries in your remote.
If your remote isn’t discovered, press and hold the Home bution for at least 10 seconds until the LED rapidiy flashes amber.
- Always replace dead batteries with new 1.5V alkaline or 1.2V NiMH rechargeable batteries.
This device complies with radio frequency(RF)exposure limits ‘adopted by the Federal Communications Commission for an uncontrolled environment,
Al the regulatory marks including FCC ID and model number can be found in the battery compariment.
Limited Warranty
‘Your Amazon Fire TV Alexa Voice Remote is covered by a 90-day Limited
Warranty. Details are available at wwwyoung-remote.com
Product Specifications
Fire TV Alexa Voice Remote
Model NO.L5883H
Electrical Rating : 3.0V(2 AAA batteries)
Temperature Rating : 0-35 °C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>