Tejar FH02 Portable HD Projector User Manual

: June 17, 2024
: TEJAR

Table of Contents

Tejar FH02 Portable HD Projector
Product Information
Product Usage Guide
Application Management

Tejar FH02 Portable HD Projector

Product Information

Specifications

Display Technology: LCD
Light Source: LED
Projection Distance: 0.92-3.72M
Projection Size: 30-120 inches
Physical Resolution: 1920*1080
Support Resolution: 4k1080P, 720i720P, 576i576P
Video Format Support: AVI/MP4/MKV/MOV/3GP/MPFG-1/MPEG-2/MPEG-4ASP/MJPEG/H.264/XVID/DivX34/VC-1/RV89/WMV3
Audio Format Support: MP2/MP3/PC/FLAC/WMA/AAC/ADPCM/APE/MPEG
Picture Format Support: BMP/JPG/JPEG/PNG/GIF

Product Usage Guide

Step 1: Power Connection

Insert the power plug into the socket.
Connect the other end of the power cord to the projector.

Step 2: Power On

Press the power button to turn on the projector.

Step 3: Equipment Connection

Connect the required equipment (e.g., laptop, DVD player) to the projector using the appropriate cables (e.g., HDMI HD cable).

Step 4: Focus Adjustment

Use the focus knob to adjust the focus and get the best display effect.

Step 5: Content Selection

Select the supported content (video, audio, or picture) to play on the projector.

Interface Introduction

When the projector is turned on, it will enter the main interface a few seconds after the startup logo appears.

USB: Connect a USB drive for local playback.
HDMI: Connect an HDMI output device for screen projection.
My Application: System pre-installed applications and customer download applications.
Settings: Move to select Settings and press OK to enter the setting page.

Projection Settings

Move to select Projection Settings and press OK to enter the setting page.
Keystone Correction Reset: Reset the parameters of the keystone correction.

Network Settings

Move to select Network Settings and press OK to enter the setting interface.
Move to select the WIFI switch, and press the OK key to switch the status.
After turning on the WIFI, select the WIFI network that needs to be connected, press the OK button to confirm, enter the WIFI password in the pop-up dialog box to connect, and press the return button to exit the network setting interface after connecting.

Bluetooth Settings

Move to select Bluetooth Settings and press OK to enter the setting interface.
Move to select Bluetooth Switch and press OK to switch the status.
After turning on the Bluetooth, select the device that needs to be paired, and press the return button to exit after completing the pairing.

Application Management

Move to select Application Management, press OK to enter the setting page.
Shake the APP that needs to be managed by the direction keys of the remote control and press the OK key to enter the setting page, where you can clear the cache and uninstall the APP on this page.

Language and Input Method

Move to select Language and Input Method, press OK to enter the setting page.
Move to select Language Settings, press OK to enter language selection, select the desired language and press OK to confirm, and press Return to exit the current page.
Move to select input method, press OK to enter input method selection, select the desired input method and press OK to confirm. Press Back to exit the current page.

FAQ

Q: How do I connect a USB drive for local playback?

A: Connect the USB drive to the USB port on the projector using a USB cable. Then, select the USB option from the main interface to access and play the files on the USB drive.

Q: How do I adjust the focus of the projector?

A: Use the focus knob on the projector to adjust the focus until you get the desired display clarity.

Q: Can I connect my laptop to the projector using a wireless connection?

A: No, this projector does not support wireless connections. You need to connect your laptop to the projector using appropriate cables, such as an HDMI cable.

Warm reminder

Before you use this machine, please read this manual carefully
In order to ensure the stability of the power supply of the whole machine, please use the power supply type indicated on the projector for power supply. Please use the power supply line that meets the national standard and the power socket with protective measures such as grounding.
Do not look directly at the projection lens when the projector is working, so as not to hurt your eyes
Do not block the vents of the projector
This product does not have waterproof function, avoid water drenching and splashing
Please unplug the power cord when not using this product for a long time
If you find this product is damaged, do not try to repair it yourself, please contact the dealer directly
Please do not disassemble the machine by yourself, otherwise our company will not be responsible for the free warranty service
In the after-sales process, please use the original foam of this machine for packaging to avoid damage during transportation

Product list

Projector
Remote control
User manual
Power cord
HDMI HD cable

Function Description

Lens
Remote control infrared
Left horn
Power interface
Air inlet , Right horn
Air outlet
Interface [HDMI,AV/AUX ,USB, Network]

Projection Specifications

Display

Technology

| Light Source| Projection

Distance

| Projection

Size

---|---|---|---
LCD| LED| 0.92-3.72M| 30”-120”
Physical

resolution

| Support

resolution

| Support

video format

| Support

audio format

| Support

picture format

---|---|---|---|---
1920*1080| 4k、1080P、| AVI/MP4/MKV/MOV/| MP2/MP3/PC| BMP/JPG/JPEG
| 720i、720P、| 3GP/MPFG-1/MPEG-2| M/FLAC/WMA| /PNG/GIF
| 576i、576P| /MPEG-4ASP/MJPEG/| /AAC/ADPCM/|
| | H.264/XVID/DivX3、4、| AudioLayer/|
| | 5/XviD/H.264/H.265/| APE/MPEG|
| | VC-1/RV8、9/WMV3| |

Projection distance/size table

Projection size (inch)	Projection distance (m)	Projection area (m*m)
30	0.92	0.66*0.37
50	1.54	1.1*0.62
80	2.48	1.77*1
100	3.1	2.21*1.25
120	3.72	2.66*1.5

Usage guide

Insert the power plug into the socket first, and then insert the other end into the projector
Press the power button to turn on the projector
Connect related equipment to the projector
Adjust the focus knob to get the best display effect
Select the supported content to play

Interface introduction

When the projector is turned on, it will enter the main interface a few seconds after the startup logo appears

USB: Connect U disk for local playback
HDMI: Connect HDMI output device for screen projection
My application: system pre-installed application and customer download application
Settings:
Move to select “Settings” and press “OK” to enter the setting page

Projection settings
Move to select “Projection Settings” and press “OK” to enter the setting page

Projection Mode: move to select “Projection Mode”, press the left and right direction keys of the remote control to select the corresponding installation mode: desktop front projection, desktop rear projection, ceiling front projection,
ceiling rear projection ZoomIn/Out : Press the “up and down” arrow keys on the remote control to zoom in and out on the projected image
FocusSettings : On/Off “Power on Auto Focus” and “Displacement Auto Focus Keystone Settings: On/Off “Power on automatic correction” and ” Displacement automatic correction”
Fast Keystone Correction: Press the “up/down/left/right” direction keys on the remote control to move the projection screen in the “horizontal/vertical” direction Rectify
Corner Correction: Press the remote control “up, down, left, right” to perform trapezoidal correction on the screen, press the “OK” button to switch to the next point for adjustment, press the “Menu” button to reset the parameters adjusted on the current page, and press the “Return” button to exit the setting interface
Keystone CorrectionReset: reset the parameters of the keystone correction

Network settings

Move to select “Network Settings” and press “OK” to enter the setting interface
Move to select the “WIFI” switch, and press the “OK” key to switch the status
After turning on the WIFI, select the WIFI network that needs to be connected, press the “OK” button to confirm, enter the WIFI password in the pop-up dialog box to connect, and press the “return” button to exit the network setting interface after connecting

Bluetooth settings

Move to select “Bluetooth Settings” and press “OK” to enter the setting interface
Move to select “Bluetooth Switch” and press “OK” to switch the status
After turning on the Bluetooth, select the device that needs to be paired, and press the “return” button to exit after completing the pairing

Application management

Move to select “Application Management”, press “OK” to enter the setting page
Shake the APP that needs to be managed by the direction keys of the remote control and press the “OK” key to enter the setting page, where you can clear the cache and uninstall the APP on this page

Language and input method

Move to select “Language and Input Method”, press “OK” to enter the setting page
Move to select “Language Settings”, press “OK” to enter language selection, select the desired language and press “OK” to confirm, and press “Return” to
exit the current page
Move to select “input method”, press “OK” to enter input method selection, s elect the desired input method and press “OK” to confirm. Press “Back” to exit t he current page

Date and time

Move to select “Date and Time” and press “OK” to enter the setting page. If you use the network to provide time, move to select “Auto Obtain”, and press “OK” to switch the status. If you need to manually set the time and date, switch the “auto acquisition” to the off state and then set the time and date manually.

Other settings
Move to select “Other Settings”, press “OK” to enter the setting page, move to select related selections to select the power-on signal source, power-on APP, power-on mode, and button sound effects. You can also restore the projector to the factory state through “Restore Factory Settings”

About this machine

Move to select “About this machine” and press “OK” to enter the interface, which contains information about the machine model, system version, Android version, memory capacity, ROM capacity, etc.
Move to select “Local Upgrade” and press “OK” to upgrade the projector system

Input connection

The projector needs to select the corresponding signal channel when connecting with different devices
The signal source button can directly call up the signal channel menu on any interface
Press the up and down keys to switch the signal channel
Press OK to confirm the signal channel
Press the return key to cancel the connection or press the select key to enter other interfaces

HDMI connection
One HDMI cable, one end is connected to the signal output device (such as: computer, high-definition player, DVD, etc.), the other end is connected to the HDMI interface of the projector, and the HDMI channel is selected
by the signal source selection button

USB connection
Connect the U disk, select the corresponding content in the main interface to open video, audio, picture, text and other files

AV connection
A 3.5mm AV cable, the red, yellow and white end is connected to the signal output device, the 3.5mm end is connected to the projector AV interface, and the AV channel is selected by the signal source selection button

External channel OSD menu setting
After the projector is connected to an external device (such as HDMI), long press the menu button to bring up the OSD menu interface to adjust the sound and image
The OSD menu adjustment settings are as follows:

Long press the menu button to enter the OSD menu
Press the up and down direction keys to select the item to be adjusted
Press the left and right direction keys to select the parameter to be set and set the parameter
Press the return key to save the settings
The main adjustment items are shown in the figure below:
Statement: The company reserves the right to modify the contents of this manual without any prior notice
Note: This product will continue to optimize the software, the actual operation interface may be different from the pictures in the manual, but it does not affect the normal realization of the functions described in the manual. We apologize for the unchanging brought to you, and we will not notify you for any changes in the operation mode caused by changes in the operation interface and some functions.