SANGAMO CHPWIFI Fort Programmable Thermostat User Guide
- May 15, 2024
- SANGAMO
Table of Contents
SANGAMO CHPWIFI Fort Programmable Thermostat
Specifications
- Product Name: CHPWIFI Fort Programmable Thermostat with RF and WiFi
- Wireless Connectivity: RF and WiFi
- Display: Room temperature or setting temperature display
- Power Source: Battery-operated
Product Overview
The CHPWIFI Fort Programmable Thermostat comes with both a thermostat and a
receiver for easy control and monitoring of your heating system. The
thermostat features various icons and buttons for intuitive operation, while
the receiver provides indicators for network status and power.
Thermostat Features
- Wireless icon: Indicates connection status with the receiver
- Frost protection icon
- Call for heat icon
- Programming mode icon
- Low battery alert
- Up and Down buttons for temperature adjustment
Receiver Features
- WiFi Status Indicator for network connectivity
- Output and Power Indicators
- Control Button for manual heat activation
Thermostat Functions
Switching between ON & Standby modes
To turn the Thermostat ON, press the power button. Press and hold the power
button again to switch to standby mode.
Key Lock Function
Press and hold specific buttons to lock or unlock the keys for added
security.
Frost Protection
The thermostat activates frost protection in standby mode to prevent
freezing.
Open Window/Door Detection Function
Detects open windows or doors to optimize heating efficiency.
Low Power Alert
An alert is displayed when the battery is low and needs replacement.
Thermostat Configuration
The thermostat offers various operating modes including Schedule Mode,
Boost Mode, and Manual Mode for different heating requirements.
Features
- Large LED display
- Touch button
- Permanent user settings, and program settings during power loss
- One button “Holiday” mode
- Programming Periods;
- 7 Day individual, 5/2 split (Monday – Friday, Saturday & Sunday)
- 6 Separate time/temperature periods per day
- Key lock facility
- Low battery indication
- Frost protection
- Optional Intelligent function; Optimal Start
- Open window function
- Integrated with Clicksmart+ App
Product Overview
Thermostat
- Wireless icon “ ” always on when paired with the receiver, flashes when connection is intermittent
- Frost protection icon
- Call for heat icon
- Programming mode icon
- Low battery alert
- Confirm icon
- Up button
- ON/OFF button
- Room temperature or setting temperature display
- Down button
Receiver
- To manually call for heat, press and hold the control button, until the LED turns Green.
Default Programming Schedule
Note : The programming schedule can be configured within the ClickSmart+
app
Thermostat Functions
Functions
Switching between ON & Standby modes
Press to turn the Thermostat into the ON mode. Press and hold again to switch
the thermostat into standby mode. When in standby mode the Thermostat will
display OF.
Note: When in standby mode, only frost protection is active on the thermostat.
Key Lock Function
In main display interface, press and hold ” ” ” ” at the same time to lock or
unlock the keys. When locked, the thermostat will display ” LC ”.
Frost Protection
If the room temperature falls below 5°C, frost damage can occur. To protect
your home, the Thermostat once it detects the ambient temperature is below 5°C
will send a Call for heat, until the temperature is above 8°C, and will then
end the Call for heat. This is indicated by a ” ” icon.
*This feature can be disabled in the configuration menu
Open Window/Door Detection Function
If the room temperature drops 1.5°C in 3 minutes, this function will activate
and display ” 0 ”, then turn down all heating. When the room temperature
increases by 1.5°C or after 30 minutes, the thermostat will return to normal
operation. Press any button to cancel this function when it is active.
Low Power Alert
When the thermostat is critically low on power, it will alert the user by
displaying ” ” to notify them to change the batteries.
Optimal Start
If optimal start is enabled, the thermostat will start the call for heat
slightly before the schedule calls for it. So that by the scheduled start
time, the ambient temperature is already at the set temperature.
*This feature can be enabled in the configuration menu
Fault
If there is damage to the internal sensor the user will be alerted by the
display message ” ER ”.
Operating Modes
Schedule Mode
The thermostat will run according to the set schedule, the screen will display
a solid ” ” icon.
Boost Mode
The boost mode, will send a call for heat until the next program in the
schedule and will continue to send the call for heat until the set temperature
is achieved.
When in schedule mode (indicated by a solid ” ” icon), press the ” ” or ” ”
and set the desired temperature, the Thermostats display will flash to
indicate it is activating the boost mode.
When a boost is currently active it will display the ” ” icon flashing.
Manual Mode
The “Manual” mode sets the thermostat to the desired temperature and will
continue to do so until, the user ends the Manual mode.
Pressing ” ” will toggle between Schedule mode & Manual Mode. The Thermostat
will indicate it is in Manual mode by not displaying the ” ” icon.
Thermostat Configuration
To configure the thermostat using its controls you will need to do the following:
- In standby mode indicated by the Thermostat displaying “ OF ”, long press “ ” to enter the configuration menu.
- The first item will display “ CL ”, press “ ” to enter the configuration for the first item.
- You can adjust the setting by pressing “ ” or “ ”.
- “ ” will flash, and then press “ ” will save current settings, and exit to the configuration menu.
- Use the “ ” or “ ” to select the configuration menu, and then press “ ” to enter the next configuration, and follow the steps 3 & 4.
- Finally, once all menus have been configured, long press “ ” to save and exit the configuration menu.
Restore factory settings:
After entering the configuration menu, press and hold both the “ ” and “ ”
buttons, to restore the thermostat to factory settings, the thermostat will
display “ dE ” and flash 3 times. This will remove any custom
configuration setting(s) and programming setting(s)
Thermostat Installation
Battery Installation
-
Take off cover
-
Install AA Batteries
-
Complete Installation
Note : Ensure the batteries are correctly installed, and the polarities are correctly aligned.
- Desk mounted
- Wall mounted
- Put the back board on the installation box ****
- Secure backplate to installation box using bolts
- Secure thermostat to backplate
- Complete
Elite Security Products
Unit 7, Target Park, Shawbank Rd Lakeside, Redditch B98 8YN
E &OE – Errors and Omissions Excepted. K23
- Telephone: 01527 51 51 50
- Fax: 01527 51 51 43
- email: sales@espuk.com
FAQ
Q: How can I pair the thermostat with the receiver?
A: Follow the pairing instructions provided in the user manual to
successfully pair the thermostat with the receiver.
Q: Can I control the thermostat remotely using a smartphone?
A: Yes, you can control the thermostat remotely using the ClickSmart+ app by
configuring the programming schedule.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>