ULTRA-SHEAR REV080423 Carbide Insert Rabbeting Bit User Manual
- May 15, 2024
- ULTRA-SHEAR
Table of Contents
ULTRA-SHEAR REV080423 Carbide Insert Rabbeting Bit
CHANGING THE CUTTING EDGE
When fresh cutting edges are needed, loosen socket-head screw with supplied hex key.
Rotate the blades to a sharp edge. Then press the blade against the seat with the edge of the blade in the groove and re-tighten.
CHANGING THE COLLAR
When changing out the Collar, loosen socket-head screw at the top of the bit with supplied hex key. Replace the Collar and re-tighten the screw.
WARNING! To reduce the risk of injury keep hands away from moving parts. Refer to your owners manual for proper setup and use.
WARNING! To reduce the risk of injury, wear safety goggles or glasses with side shields, ear protection & a dust mask.
woodpeck.com At Woodpeckers we are constantly reviewing
& improving our tools. The most current version of our instruction manuals are
always available to download at wood peck.com (Located in the bottom section
of the tool’s page under the “Additional information” or “Instruction” tabs)
Be the first to know all the new products, One TIME Tools & sales by subscribing to our eClub. (Located at the top center of our webpage woodpeck.com)
Subscribe to our YouTube channel to stay up-to-date on all the latest tool tips & tricks.
Interact with us! Follow us on Facebook, Instagram & TikTok!
Enjoy shop tips, project ideas, tool techniques & more in our Woodworking Resource Center/Blog. (Located at the button center of our webpage woopeck.com)
WARNING!
This product can expose you to chemicals, including chromium, which is known
ID the State of California to cause cancer and birth defect; or other
reproductive harm For more information go to
www.P65Wamings.ca.gov
Customer Support
Woodpeckers, LLC Strongsville, Ohio
woodpeck.com
© 2023 Woodpeckers LLC
Customer Support
Watch the video or visit woodpeck.com
If you think you’re missing anything, email us at mailroom@woodpeck.com. You can also call us at 800-752-0725 from 9:00 a.m. to 4:00 p.m. EST Monday- Friday.
