Digital Ant DA-WC-001 3 In 1 Wireless Charger User Manual
- May 15, 2024
- Digital Ant
Table of Contents
Digital Ant DA-WC-001 3 In 1 Wireless Charger
Specifications
- Input: 9V/2A, 9V/2.7A
- Output for smartphone: 15W/10W/7.5W/5W
- Output for earbuds: 5W
- Output for smartwatch: 2.5W
- Plug: USB Type-C
Product Information:
This 3-in-1 wireless charger can support 3 devices simultaneously. The in-
built wireless charger is compatible with most Qi-enabled devices and supports
fast wireless charging. It is made of durable bamboo, which is environmentally
friendly.
Package List
- 3-in-1 wireless charger x 1
- USB Type-C cable x 1
- User Manual x 1
Important Safeguards
- DO NOT disassemble or use if expansion or deformation occurs.
- DO NOT cause a short circuit.
- NO impact, extrusion, or throwing into a fire.
- Keep the product away from sources of heat (e.g., direct sunlight), ignition, dust, and water.
- Store the product in a cool and dry condition.
Product Usage Instructions
Step 1: Unboxing
Remove all items from the package, including the 3-in-1 wireless charger, USB
Type-C cable, and user manual.
Step 2: Setup
Connect the USB Type-C cable to the 3-in-1 wireless charger and plug the other
end into a power source.
Step 3: Charging Devices
Place your Qi-enabled smart phone, earbuds, or smart watch on the designated
charging areas of the wireless charger to start charging wirelessly.
Step 4: Monitoring
Monitor the charging status of your devices. The smart phone can receive up to
15W of power, earbuds up to 5W, and smart watch up to 2.5W.
Description:
This 3-in-1 wireless charger can support 3 devices simultaneously. The in- built wireless charger is compatible most Qi-enabled devices and supports fast wireless charging. It is made of durable bamboo which is friendly for human.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However,there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC ID: 2A5J9-DA-WC-001
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>