manhattan 462297 Height Adjustable TV Mount Stand Instructions
- June 3, 2024
- Manhattan
Table of Contents
manhattan 462297 Height Adjustable TV Mount Stand
Important: Read before use.
Safety Precautions
-
Avoid potential injuries or property damage!
Manhattan is not responsible for damage or injury caused by incorrect assembly or use. -
Be sure that you understand all instructions before you begin assembly. Ensure that you have received all parts according to the component checklist prior to installation.
-
Safety gear and proper tools must be used. This product should only be installed by professionals.
-
Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
-
This product is intended for indoor use only.
Maintenance
Check that the bracket is secure and safe to use at regular intervals (at
least every three months).
For specifications, go to manhattanproducts.com. Register your product at
register.manhattanproducts.com/r/462297 or scan the QR code below.
Parts
Required; not provided
Measure the width & height of your VESA mounting pattern.
NOTE: This TV mount must only be used on TVs with VESA patterns that are within the width (X) and height (Y) ranges shown. Determine the right screw size for your TV from the ones provided.
Use spacers for irregular backs of TVs
No spacers for flat-back TVs
Secure mounting brackets (2) to back of TV with appropriate screw/washer/spacer combo (TV1 – TV8).
WARRANTY AT
manhattanproducts.com
support.manhattanproducts.com/barcode/462297
References
- Manhattan Products: HDMI Adapters, Cables, TV Mounts, Barcode Scanners
- Manhattan Products Account and Product Registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>