HAEGER SI-280.012B Ultra Steam Inox Sole Steam Iron Instruction Manual

: June 17, 2024
: HAEGER

HAEGER SI-280.012B Ultra Steam Inox Sole Steam Iron Instruction Manual

Installation

For your security, please read these instructions for use before using the appliance

ATENTION: To avoid water dripping, before filling the water tank, ensure the steam regulator is switched to “0” position and the temperature knob is on (• •) or (• • •).

Dear customer
Thank you for having chosen a HÆGER product.
The HÆGER products have been produced to think about the welfare of the consumer privileging the most raised standards of quality, functionality and assign. We are sure you will be happy with this appliance.
We assume that the user is familiar with the common procedures of handling household appliances.
Before using the appliance for the first time please read carefully and thoroughly through these operating instructions and the safety advice, completely familiarising yourself with the appliance. Retain these instructions for future reference and pass them on to whoever might acquire the appliance at a future date.

General safety Warnings

When using electrical appliance, basic safety precautions should always be followed, including the following:

Read the operating instructions carefully.
The appliance has been designed for home use only and must not be used for commercial or industrial purposes.

Danger of electric shock or fire!

Do not leave the iron unattended while it is plugged in.
Connect it only to the voltage stated on the characteristics plate. The use of an earthed socket is recommended.
Take care when using the appliance with children present.
When placed on its support, make sure that the surface on which the support stands is stable.
The iron must be used and rested on a stable surface.
Do not use the iron if it has been dropped, shows visible signs of damage or if it is leaking water. It will have to be checked by an Authorized Technical Service Centre before it can be used again
During breaks in ironing, leave the appliance in the vertical position.
Never leave the hot iron on textiles or materials which could burn easily.
Never rest the iron on the electrical connection cable.
Do not use the iron if the cable becomes frayed.
Do not immerse the iron in water or any other liquid.
Unplug the iron from the mains supply before filling it with water, or before pouring out the remaining water after use.
When the ironing is finished, unplug the cable from the mains and empty out the water tank.
Do not unplug it by pulling on the cable, nor leave the plug hanging freely.
If you need to leave the room where you are ironing, then switch the iron off and pull the plug out off the wall socket.
With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g., replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorized Technical Service Centre.
This steam iron may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use of the product in a safe manner and understand the potential dangers. Do not allow children to play with the iron. Cleaning and maintenance performed by the user must not be performed by unsupervised children. If it is connected to a power socket or if it is cooling down, keep the iron and its power cord out of reach of children younger than 8 years of age.
Do not place the iron on or near an electric or gas stove or other sources of heat.
Do not touch the hot ironing surfaces. Otherwise, this could cause burns.
If you have wet hands do not touch the iron if it is connected to an electrical power socket.

Description

About your Steam iron:

Spray nozzle
Water tank cover
Steam regulator
Spray button
Super Steam button
Temperature regulator
Water tank
Soleplate
Self-Clean button

Before using the iron for the first time

Fill the iron’s water tank and set the temperature regulator to the “MAX” position.
Plug the appliance in and when the iron reaches the selected temperature (the pilot lamp will go out), evaporate the water by setting the steam regulator to the (O) position and pressing the super steam button repeatedly.
When using the steam for the first time, first try it away from the clothes just in case there is any dirt lodged in the steam chamber.

How to use the iron

The pilot lamp will stay lit while the iron is heating up and go out as soon as it has reached the selected temperature. Once the iron is hot, you can start ironing even while it continues to heat itself.
Sort your garments out based on their cleaning symbol labels, always starting with clothes that must be ironed at low temperatures. Please note that on the label means that this article may not ironed.

•	Synthetic fibres	Low temperature
••	Silk- Wool	Medium temperature
•••	Cotton, Linen	High temperature

Filling the water tank

Set the steam regulator to the “0” position and unplug the iron from the wall socket.
Use distilled water or tap water (soft to medium water hardness). If water in your area is hard or very hard (more than 14°dH/2,5mmol/l), we recommend that you use 1 part of distilled water and 1 part of tap water.
Your water supply company can provide you with the hardness levels for your area. Do not fill beyond the maximum water level.

Dry Ironing

Set the steam regulator to the “O” position and turn the temperature regulator to the desired position. The Spray and Steam functions may be used if required.

Steam Ironing

Unplug the iron from the mains supply. Turn the steam regulator to the “0” position, open the lid on the filling spout and fill the tank with water.
Plug the iron into the mains supply and select a suitable temperature. The pilot lamp will stay lit while the iron is heating up and go out as soon as it has reached the selected temperature.
As soon as the steam iron is hot, turn the steam regulator to (O) position. You can always regulate the amount of the steam by turning the steam selector between (O) and (MAX).
When ironing with steam, make sure that the temperature control is always between the (••) and (•••) Max settings.
When using the steam iron for the first time, try it away from the clothes just in case there is any dirt in the steam chamber.
When you have finished ironing, set the steam regulator to the “0” position and empty the tank

Spraying methods

You can get an additional burst of spray, whether ironing dry or with steam, in the following way:

Press the spray button. Do not use the spray for ironing silk as this may leave water marks.

Burst of Steam

Just as with the Spray function you can also get an additional burst of steam when ironing with or without steam by doing the following:

Set the temperature regulator between the (••) and (•••) Max settings and wait until the iron reaches temperature.
Raise the iron slightly up off the material and press the super steam button down firmly.
Pause for at least 5 seconds between each jet of steam.

Crease removal in vertical

Set the temperature regulator between the (••) and (•••) settings and wait until the iron reaches temperature.
Hang the garment on a hanger and place the iron some 10-20 cm away. Never iron a garment if somebody is wearing it at the time.
Press the super steam push button pausing for at least 5 seconds between each press

Anti-Calc System

This iron has an innovative built-in anti-limescale system, consisting of a resin filter that retains the limescale substances from the water, so these cannot reach the steam chamber of the soleplate, thus extending the life of the iron.
However, please note that the anti-limescale cartridge will not completely stop the natural process of limescale build-up.

Anti-Drip system

The iron incorporates an anti-drip system that prevents the iron from dripping, even when it is switched off.

With the anti-dripping system, you can perfectly iron even the most delicate fabrics.

Self-Cleaning

The function of self-clean is to clean the soleplate after using the iron for approximately 2 months.

Fill the water container up to the marking MAX.
Insert the plug into the power socket.
Set the temperature regulator to the position MAX (•••).
Let the iron warm up till the control light cuts off and lights up again.
Hold the iron horizontally over a trap vessel.
Press the Self-Clean button and hold it in this position. Now steam and boiling water will start emerging from the steam escape holes at the gilding sole. Any dirt, if present, will get washed out.
Release the Self-Clean button as soon as the water in the water container is used up.
To ensure that no water remains in the steam chamber, dry the gilding sole thoroughly. For this purpose, wipe the gilding sole a few times on a towel or an old cloth.
Allow the iron to cool down before storing it away.

Emptying out the water tank

Take the plug out of the mains socket, open the lid on the filling spout and empty out the tank by holding the iron pointed-end down and shaking it gently.

Storage

The iron can be stored away with the cable coiled up in the rear area. It is advisable to store the iron in the upright position with the water tank empty and the steam regulator set to “0”.

Cleaning & Maintenance

Avoid scratching the iron; do not pass it over hard surfaces. Traces of starch or sprays can be removed from the base by using damp cotton wool or a non-abrasive cleaning product.
Do not put chemicals or detergents into the water tank.
The outside surfaces can be cleaned down with a damp cloth, without ever having to use abrasive agents or solvents

Technical Specifications

Main voltage: 220-240V~ 50Hz| Models: SI-280.012B (Ceramic) / SI-280.014A (Stainless steel)
---|---
Protection Class: I| Power: 2800W

Conformity CE

This product has been tested and produced according to all relevant current CE guidelines, such as:

Electromagnetic compatibility Directive 2014/30/EU,
Low voltage Directive (LVD) Directive 2014/35/EU,
RoHS with its amendments Directive EU 2015/863, and has been constructed in accordance with the latest safety regulations.

The CE mark attests this product with all relevant directives.

Disposal – Environment policy

Packing
The packaging material is entirely recyclable and marked with the recycling symbol. Follow local regulations for scrapping.
Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous.

Disposal
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
This symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Warranty

Warranty Terms and Conditions

The product is guaranteed for the period stipulated by the legislation where it is placed on the market, starting from the date of purchase, against manufacturing defects and/or workmanship. The lack of conformity manifested in this period is presumed to exist at the date of purchase. After this period, it is for the customer to prove that the lack of conformity already existed at the time of delivery.
If, during the warranty period, the product is defective in normal use, the buyer should contact the selling establishment and send the appliance to the place indicated by the seller.
The warranty is only valid upon presentation of the invoice proving the purchase and the completed warranty certificate (indicating the date of purchase, the name of the dealer, the reference of the model, and it is also recommended to indicate the serial number and lot number).
The importer/seller reserves the right to refuse warranty assistance in the event that such information has been deleted or altered after the original purchase of the product.
The responsibility of the importer/seller includes in particular the costs of repairing and/or replacing the unit covered by the warranty with the reservation of the right to replace it with an equivalent product, in cases where it is not possible to repair it.
The warranty does not apply to problems that are not directly related to defects in material, design or workmanship.
This product is an appliance and is intended for home use only. The warranty will be void if the product is used for professional purposes.
The warranty does not cover damage caused by misuse, improper installation, spillage, external factors, or intentional damage.
The warranty does not cover damage resulting from falls, use of excessive force, blows, exposure to extreme environmental conditions or deterioration caused by the normal use of plastic parts or keyboards, as well as the use of batteries other than those specified in this manual.
The warranty does not cover installation and programming by the dealer. In particular, no claim for installation and free programming by the reseller may be accepted.
The warranty does not cover deficiencies that insignificantly impair the operation of the appliance. Other costs, such as installation, transportation and travel of the technician are expressly excluded from the warranty.
The applicability of the warranty presupposes that the appliance is sent to the seller or place indicated by him, complete and in well-protected packaging (if possible, in its original packaging) and accompanied by its sheet or warranty card duly filled out and proof of purchase.
If after verification, it is found that there are no reasons for the claim, or that the product is not defective, the inherent costs will be imputed to the customer, and the dealer is authorized to charge those costs to the customer.
The warranty will be void when it shows signs that an unauthorized person has attempted to carry out repairs, modifications or replacement of parts on the appliance.
Repairs carried out after the end of the warranty period are subject to costs.
This warranty does not affect your legal rights that you may have as a consumer under applicable national law governing the purchase of products where the product is sold.
Warranty Period:
European Union countries – European Directives (EU) 2019/771 and (EU) 2019/770 apply on certain aspects of contracts for the purchase and sale of movable property and transposed into the national laws of their countries. Other countries – national legislation on consumer rights in their country applies. In the case of no official legislation, the guarantee shall be applied at the discretion of the importer placing the product on the market or the seller establishment.

Download Multi-language file

**RoHS

**

Documents / Resources

| HAEGER SI-280.012B Ultra Steam Inox Sole Steam Iron [pdf] Instruction Manual
SI-280.012B Ultra Steam Inox Sole Steam Iron, SI-280.012B, Ultra Steam Inox Sole Steam Iron, Inox Sole Steam Iron, Sole Steam Iron, Steam Iron, Iron
---|---