HAEGER SF-16B.014A Stand Fan Instruction Manual

HAEGER SF-16B.014A Stand Fan

Product Information

Specifications

• Models: SF-16W.014A / SF-16B.015A
• Rated voltage range: 220-240V~50/60Hz
• Rated power: 45W

Intended Use
The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges.

General Safety Instructions
Children and Frail Individuals: [No specific instructions provided]

Overview of the Components
The product consists of the following components:

1. Front protection grid
2. Fan propeller
3. Rear grid
4. Motor housing
5. Connection screw
6. Height adjustment ring
7. Round base
8. Propeller cap
9. Rear grid nut
10. Oscillation knob
11. Switch housing
12. Inner tube
13. Outer tube
14. Base locking screw

Putting into Service

• Working Place: Choose a suitable location and a non-slip, flat surface. Never place the device directly next to heaters or other heat sources. There is always the danger of fire!
• Electrical Connection:
  • Connect the device to a duly installed 220-240V~50/60Hz protective contact socket.
  • Before inserting the plug into the socket, make sure that the mains voltage to be used matches that of the device. You can find this information on the nameplate.

Product Usage Instructions

Basic Settings
To select the fan speed, use the selector on the front to set one of the following speeds:

• 0 = Turn OFF
• 1 = Low
• 2 = Medium
• 3 = High

Blower Direction/Oscillation
You can choose from the two following options:

1. Turn the device carefully with hands by holding the fan on the sides and turning it either to the left or to the right until the limit stop.
   Warning: Do not exceed this limit. The device must have been switched off before. The setting knob must be pulled out.

Cleaning and Maintenance

1. Switch off the fan and remove the plug from the power outlet before assembling, cleaning, or maintenance.

2. Clean the plastic components by using a mild detergent and a damp cloth or sponge.
   Caution: Never use aggressive detergents, chemical cleaners, or solvents as they could damage the surface of plastic components.
   Note: Do not use chemical, steel, wooden, or abrasive cleaners to clean the appliance.

3. Dry throughout before storage.

Warning

• If you need to remove the safety guard, always switch the device off and remove the mains plug.
• Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise, this might result in an electric shock or fire.

FAQ

• Q: Can I use this appliance outdoors?
  A: No, this appliance is not designed for outdoor use.

• Q: Can I clean the appliance with aggressive detergents or solvents?
  A: No, using aggressive detergents or solvents can damage the surface of the plastic components. It is recommended to use a mild detergent and a damp cloth or sponge for cleaning.

• Q: Can I immerse the device in water for cleaning purposes?
  A: No, under no circumstances should you immerse the device in water for cleaning purposes. This can result in an electric shock or fire.

Dear customer
Thank you for having chosen a HÆGER product. The HÆGER products have been produced to think about the welfare of the consumer privileging the most raised standards of quality, functionality and assign. We are sure you will be happy with this appliance. We assume that the user is familiar with the common procedures of handling household appliances. Before using the appliance for the first time please read carefully and thoroughly through these operating instructions and the safety advice, completely familiarising yourself with the appliance. Retain these instructions for future reference and pass them on to whoever might acquire the appliance at a future date.

Intended Use
The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges.

General Safety Instructions

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.
• Do not operate the appliance without supervision. If you leave the room, you should always turn the device off. Remove the plug from the socket.
• Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
• Pay careful attention to the following Special Safety Instructions….

Children and Frail Individuals

•  To ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
• Caution! Do not allow small children to play with the foil as there is a danger of suffocation!
• The appliance may be used by children 8 years or older and by persons with reduced physical or mental capabilities, if they are under supervision or if they have been instructed in the use of the appliance in a safe manner and understand the potential risks.
• Children must not carry out cleaning and maintenance of the appliance, unless they are 8 years or older and under supervision.
• Children younger than 8 years must be kept away from the appliance and its power supply.
• Children should be supervised always to ensure that they do not play with the device.

Special safety instructions

• Never stick fingers or other objects through the protection grid!
• Watch out for long hair! It can be caught in the fan owing to the air turbulence!
• Use the appliance only with the protection grids on!
• The appliance must be assembled completely before use!
• Select a stable base to avoid the tipping of the fan during use!

Overview of the Components

1. Front protection grid
2. Propeller cap
3. Fan propeller
4. Rear grid nut
5. Rear grid
6. Oscillation knob
7. Motor housing
8. Switch housing
9. Connection screw
10. Inner tube
11. Height adjustment ring
12. Outer tube
13. Round base
14. Base locking screw

Before first use

• Take the appliance and accessories out of the box. Remove the stickers, protective foil or plastic from the device.
• Before use, clean the motor housing and all the spare parts with a damp cloth.

Assembly instructions

BASE ASSEMBLY

1. Position and insert the outer tube (12) to the base (13) aligned with the central hole. Insert and fasten the base screw (14).
2. Loosen the height adjustment ring (11) from the top of the inner tube (10). Pull the inner tube out from the outer tube to adjust it to the desired height and tighten the height adjustment ring (11).
3. Loosen the connection screw (9) on the back of the fan body and then slide the fan head down over the inner tube and tighten the screw (9). Make sure the connection screw is tightly secured.

BLADE AND GRILLE ASSEMBLY

1. Unscrew the propeller cap (2) from the motor shaft by holding the motor shaft and rotating it clockwise.
2. Unscrew the rear grid nut (4) from the front of the motor cover (7) by rotating it anticlockwise.
3. Position the rear grid (5) against the front of the motor cover, ensuring that the locating pegs on the motor cover are engaged correctly in the holes on the rear grid.
4. Replace and tighten the grid nut (4) by turning it clockwise.
5. Push the propeller (3) onto the motor shaft, locating the slot on the back of the fan blade on to the drive pin that passes through the motor shaft.
6. Tighten the propeller cap (2) by turning it anticlockwise.
7. Position and place the front grid (1) to the rear grid (5), and push the front grid (1) until all the hooks of the rear grid hook the front grid.

Putting into Service

• Working place
  • Choose a suitable location and a non-slip, flat surface.
  • Never place the device directly next to heaters or other heat sources. There is always the danger of fire!
• Electrical Connection

1. Connect the device to a duly installed 220-240V~50/60Hz protective contact socket.
2. Before inserting the plug into the socket. Make sure that the mains voltage to be used matches that of the device. You can find this information on the nameplate.

Use

Basic Settings
Set the blower inclination angle before starting the device. You can adjust the inclination angle by tipping the blower casing with both hands. The inclination angle amounts to approx. 15°.

Operating
To select the fan speed, use the selector on the front to set one of the following speeds:

• 0= Turn OFF
• 1 = Low
• 2 = Medium
• 3 = High

Blower Direction/Oscillation
You can choose from the two following options:

1. Turn the device carefully with hands by holding the fan on the sides and turning it either to the left or to the right until the limit stop. Warning: do not exceed this limit. The device must have been switched off before. The setting knob must be pulled out.
2. Select the automatic swinging direction by pressing in the knob. The device swings automatically within a range of 90°. This function is active only when the fan is on. To deactivate the function, pull out the setting knob.

Cleaning and Maintenance

1. Switch off the fan and remove the plug from the power outlet before assembling, cleaning or maintenance.
2. Clean the plastic components by using a mild detergent and a damp cloth or sponge. Caution: Never use aggressive detergents, chemical cleaners or solvents as they could damage the surface of plastic components. Note: Do not use chemical, steel, wooden or abrasive cleaners to clean the appliance.
3. Dry throughout before storage.

Warning

• If you need to remove the safety guard: always switch the device off and remove the mains plug.
• Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise, this might result in an electric shock or fire.

Technical Data

• Models: …………………………………………………………………. SF-16W.014A /SF-16B.015A
• Rated voltage range: ……………………………………………….. 220-240V~50/60Hz
• Rated power: ………………………………………………………….. 45W
• Protection class: ……………………………………………………… ΙΙ

Information requirement for comfort fans

• Maximum fan flow rate (F): ……………………………………… 74,37 m3/min
• Fan power input (P): ……………………………………………….. 40,40W
• Service value (SV): ……………………………………………………. 1,84 (m3/min)/W
• Off-mode power consumption (POFF): ………………………… 0 W
• Fan sound power level (LWA): ……………………………………. 53,61 dB(A)
• Maximum air velocity (C): ………………………………………… 2,27 meters/sec
• Seasonal electricity consumption (Q): ……………………….. 13,42 kWh/a
• Measurement standard for service value: ………………….. IEC60879:1986 (corr.1992)

Conformity CE
This product has been tested and produced according to all relevant current CE guidelines, such as:

• Electromagnetic compatibility Directive 2014/30/EU,
• Low voltage Directive (LVD) Directive 2014/35/EU,
• RoHS with its amendments Directive EU 2015/863, and has been constructed in accordance with the latest safety regulations.
  The CE mark attests this product with all relevant directives.

Disposal – Environment policy

Packing
The packaging material is entirely recyclable and marked with the recycling symbol. Follow local regulations for scrapping. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous.

Disposal
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
This symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out by local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Warranty Declaration

Warranty Terms and Conditions

1. The product is guaranteed for the period stipulated by the legislation where it is placed on the market, starting from the date of purchase, against manufacturing defects and/or workmanship. The lack of conformity manifested in this period is presumed to exist at the date of purchase. After this period, it is for the customer to prove that the lack of conformity already existed at the time of delivery.
2. If, during the warranty period, the product is defective in normal use, the buyer should contact the selling establishment and send the appliance to the place indicated by the seller.
3. The warranty is only valid upon presentation of the invoice proving the purchase and the completed warranty certificate (indicating the date of purchase, the name of the dealer, the reference of the model, and it is also recommended to indicate the serial number and lot number).
4. The importer/seller reserves the right to refuse warranty assistance if such information has been deleted or altered after the original purchase of the product.
5. The responsibility of the importer/seller includes in particular the costs of repairing and/or replacing the unit covered by the warranty with the reservation of the right to replace it with an equivalent product, in cases where it is not possible to repair it.
6. The warranty does not apply to problems that are not directly related to defects in material, design or workmanship.
7. This product is an appliance and is intended for home use only. The warranty will be void if the product is used for professional purposes.
8. The warranty does not cover damage caused by misuse, improper installation, spillage, external factors, or intentional damage.
9. The warranty does not cover damage resulting from falls, use of excessive force, blows, exposure to extreme environmental conditions or deterioration caused by the normal use of plastic parts or keyboards, as well as the use of batteries other than those specified in this manual. 10. The warranty does not cover installation and programming by the dealer. In particular, no claim for installation and free programming by the reseller may be accepted. 11. The warranty does not cover deficiencies that insignificantly impair the operation of the appliance. Other costs, such as installation, transportation and travel of the technician are expressly excluded from the warranty. 12. The applicability of the warranty presupposes that the appliance is sent to the seller or place indicated by him, complete and in well-protected packaging (if possible, in its original packaging) and accompanied by its sheet or warranty card duly filled out and proof of purchase.
10. If after verification, it is found that there are no reasons for the claim, or that the product is not defective, the inherent costs will be imputed to the customer, and the dealer is authorized to charge those costs to the customer.
11. The warranty will be void when it shows signs that an unauthorized person has attempted to carry out repairs, modifications or replacement of parts on the appliance.
12. Repairs carried out after the end of the warranty period are subject to costs.
13. This warranty does not affect your legal rights that you may have as a consumer under applicable national law governing the purchase of products where the product is sold.
14. Warranty Period:
    • European Union countries – European Directives (EU) 2019/771 and (EU) 2019/770 apply on certain aspects of contracts for the purchase and sale of movable property and transposed into the national laws of their countries.
    • Other countries – national legislation on consumer rights in their country applies. In the case of no official legislation, the guarantee shall be applied at the discretion of the importer placing the product on the market or the seller establishment.

HAEGERTEC, s.a.
Edifício HAEGER – Pct. Cidade de Londres, 1 Parque Industrial do Arneiro support)
2660-456 S. Julião do Tojal
PORTUGAL
https://www.haegergroup.com

Tel: +351 21 949 83 00 (PBX)
Tel: +351 21 949 83 02 (after sales
Fax: +351 21 949 83 25
e-mail: assistencia@haegergroup.com
e-mail: comercial@haegergroup.com

References

• HAEGER Home Appliances
• HAEGER Home Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>