Wiser CCTFR6400 Room Thermostat User Manual
- June 17, 2024
- Wiser
Table of Contents
Wiser CCTFR6400 Room Thermostat
About this product
The Wiser Room Thermostat is used for all heating types. The room thermostat
is an interface for the end-user to view the current room temperature and
change the temperature setting in a room.
Additional room thermostats can be added to rooms with radiator thermostats.
The Room Thermostat works with all Wiser kits.
1 Checking package contents
- A Wiser Room Thermostat
- B Wall bracket
- C Stand
- D 2 x AA battery
- E Instruction leaflet
2 Inserting the batteries
- Insert the batteries into the room thermostat.
- Do not use rechargeable batteries.
TIP : Make sure that the polarity of the batteries (+ and -) are in the right direction. The polarity is indicated on the terminals of the device.
3 Choosing suitable location to install
The Room Thermostat can be placed on:
a. Stand
Clip the stand into the device and place it on a flat surface.
b. Wall bracket
Screw the wall bracket to the wall.
NOTE : Screws are not included in the package, it must be procured separately.
NOTICE: EQUIPMENT DAMAGE
- Do not mount the room thermostat in a place exposed to direct light from sun or air currents (for example, close to the ventilation outlets).
- Do not mount the room thermostat behind a curtain, large objects or furniture that reduces the radio signal.
Failure to follow these instructions can result in equipment damage.
4 Display and Operating Elements
- F Reduce temperature
- G Boost
- H LED
- I Increase temperature
- J Display
5 Read full device guide online
Scan the QR code and choose your language for complete information about the device, including operation, configuration and using the product with a Wiser system.
Technical data
Power supply: | 2 alkaline batteries type IEC LR6 1.5 V (AA) |
---|---|
Interfaces: | User: TFT screen, touch buttons |
Wiring: | No cabling required |
Temperature setting range: | 5 °C to 30 °C |
Temperature resolution: | 0.5 °C |
Operating temperature: | 0 °C to 45 °C |
Storage temperature: | -20 °C to 65 °C |
Operating frequencies: | 2.4 GHz (bidirectional, mesh) |
Transmission: | +13 dBm (20 mW) |
Degree of pollution: | 2 |
Radio signal range: | 30 m in free space |
Software class: | A |
IP rating: | IP20 |
Mounting: | Wall bracket or table stand |
Product dimensions: (H x W x D) | 76 x 76 x 25 mm |
Trademarks
Wiser™ is a trademark and the property of Schneider Electric SE, its
subsidiaries and affiliated companies.
Other brands and registered trademarks are properties of their relevant
owners.
EU Declaration of Conformity
Hereby, Schneider Electric Industries, declares that this product is in
compliance with the essential requirements and other relevant provisions of
RADIO EQUIPMENT DIRECTIVE 2014/53/EU. Declaration of conformity can be
downloaded on: se.com/docs
Schneider Electric Industries SAS
If you have technical questions, please contact the Customer Care Centre in
your country. se.com/contact
UK Representative
Schneider Electric Controls
401 Southway Drive
Plymouth, PL6 6QT
United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>