1MORE Q30 Pro PistonBuds User Manual
- June 17, 2024
- 1more
Table of Contents
1MORE Q30 Pro PistonBuds
1 MORE MUSIC APP
For users outside mainland China, please download the 1MORE MUSIC APP for product upgrades and additional features.
1MORE MUSIC APP
- APP UI in user guide may vary and for reference only, please refer to UI on device.
Box Content
Instruction For Use
Answer/End call: Double-tap
Decline: Press and hold
Voice control on cellphone:
Tap 3 times when Bluetooth is on and not on a phone call.
Play/Pause: Double-tap
- To change a song or control volume, please set up on 1MORE MUSIC APP or operate on paired mobile phone or device.
- Above functions are available for either earbud in individual or stereo mode. Custom setup is available on the APP.
- Above functions may vary with different devices.
Extra Functions
- If the earbuds cannot pair normally when powered on, open the case and quickly click the pairing button 3 times to reset the Left & Right pairing process.
- Unpair the Connected Device: Put the earbuds into the case, press and hold the pairing button for 8 seconds.
- OTA Firmware Update:
It can be synchronously upgraded via the 1MORE MUSIC APP while the Left and Right earbuds are connected to each other with at least 50% battery.
- Functions of 1MORE MUSIC APP may vary with different cell phones or operating systems.
For more details, please contact our customer service.
1MORE (1) Year Limited Warranty
1MORE warrants to the original retail purchaser that this product is to be
free from defective materials and workmanship for a period of one year from
the date of purchase if it is properly used and maintained. If this product
proves defective in either material or workmanship, 1MORE, at its option, will
(a) repair the product with new or refurbished parts, or (b) replace the
product with an equivalent new or refurbished product, at no charge for parts
or labor. If the product model is no longer available and cannot be repaired
effectively or replaced with an identical model, 1MORE at its sole option may
replace the unit with a current model of equal or greater value. In some
cases, modification to the mounting surface may be required where a new model
is substituted. 1MORE assumes no responsibility or liability for such
modification. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS
WARRANTY, PLEASE RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER
SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT
WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but
not limited to a receipt or sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.
Limitations:
- This limited warranty does not cover the failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
- This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
- This limited warranty is null and void for products not used in accordance with 1MORE’s instructions.
- This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an AUTHORIZED dealer.
- This limited warranty terminates if you sell or otherwise transfer this product to another party.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your satisfaction. If you would like more details on this product or any of our other products, please visit us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1MORE will treat you like one.
Tips
- Please read this instruction manual carefully and retain for future reference.
- Please fully charge the battery before first use.
- If the headphones have been unused for more than 3 months, we recommend that you charge them. This will improve battery capacity.
- Only use charging cables and adapters that are FCC (Federal Communications Commission) approved.
- In dry environments, static electricity may numb your ear. This is not related to the quality of the product.
Safety Information
- Never disassemble the headphones. There are no user-serviceable parts inside.
- Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above 113 °F (45 °C).
- Do not use the headphones in a thunderstorm storm. This could prevent the headphones from working properly, and also increase your chance of being electrically shocked.
- Do not use oil or any volatile liquid to clean this product.
- Do not listen at high volumes for extended periods of time.
- Do not use the headphones in traffic. Do not use the headphones any time it would be dangerous to be unaware of noises around you.
- Adult supervision is required for children of age 6 and under.
FAQ
-
Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes. -
Why the headphones cannot connect to my cell phone, or take a long time to connect?
-
If the left & right earbuds cannot be paired and only one earbud can be connected to the phone, please put the two earbuds back into the case, triple click the pairing button on the case, search for earbuds’ name in your phone’s Bluetooth settings and tap to connect.
-
To connect with a new phone, put the earbud’s back into the case, triple click the pairing button when the phone is powered on (no music or phone calls), search for earbuds’ name in your phones Bluetooth settings and tap to connect.
-
Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Media Audio” option is on. -
there is no sound from the headphones while making phone calls after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Phone Audio” option is on. -
Why the Bluetooth connection is not stable and causes some interruptions?
-
Try shortening the distance between your headphones and device. Avoid solid barriers in between.
-
Please keep away from strong interference sources, such as Wi-Fi and GPRS.
-
Please make sure the Bluetooth antenna of your device is not blocked.
-
Why some control functions do not match those in the manual while using third party music/video player Apps?
Your operating system and the third party music/video player apps may have different settings for the control functions. We recommend that you use the music/video player apps that your device has originally provided. -
I turned the headphones up to the maximum volume, but why the actual volume still sounds low?
In different operating systems, especially some Android systems, the headphones and your device have separate volume control systems. Please adjust the volume controls on both the device and the headphones according to your preference. -
Why are my headphones not able to connect to 1MORE MUSIC APP for the primary use?
For Android users, please click “Allow all the time” to access to the location information of your device when entering 1MORE MUSIC APP. Or adjust this option in your settings for this app.
- For more detailed product FAQs, please visit the product support section under www.1more.com
WEEE
Electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment.
Your 1MORE retailer will advise you of the correct way of disposal in your country.
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.
CE
Declaration of Conformity Hereby, Tiinlab Corporation declares that the radio
equipment type 1MORE Piston Buds Pro Wireless Headphones of EC305 is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.1more.com
Hereby, Tiinlab Corporation declares that the
radio equipment type Wireless Earphones is in compliance with UK Radio
Equipment Regulations (SI 2017/1206).
The full text of the UK declaration of conformity is available at the
following internet address: www.1more.com
EU regulatory conformance：
RF exposure information: The device has been evaluated to meet general RF
exposure requirement.
The device can be used in portable exposure condition without restriction.
Radiation Exposure Statement
Power is so low that RF exposure calculation is needed.
Operation Frequency/Max. EIRP: 2402-2480 MHz/6.93dBm.
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
The symbol indicates DC voltage.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive
2014/53/EU in order to be recycled or dismantled to minimize its impact on the
environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The SAR limit of USA (FCC) is 1.6 W/kg for head averaged over one gram of tissue. Device types EC305 (FCC ID：2ASDI-EC306 ) has also been tested with 0mm against this SAR limit.
IC regulatory conformance
This device complies with CAN ICES-003 (B)/NMB-003(B).
This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 0 cm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do o meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them.
Name: Wireless Earphones
Model: EC 305
Headphone Weight: 4.6 g
Case Weight: 34.8 g
Product Weight: 43.9 g
Headphone Size: 20×25×28 mm
Case Size: 62.1×42.7×23.8 mm
Headphone Battery Capacity: 43 mAh
Case Battery Capacity: 410 mAh
Headphone Charging Time: 1h
Case Charging Time: 2h
Playtime (ANC On):
Headphone Fully Charged: 5h
Headphones & Case Fully Charged: 20h
Playtime (ANC Off):
Headphone Fully Charged: 7.5h
Headphones & Case Fully Charged: 30h
Impedance: 16 Ω
Wireless Range: 10 m
Bluetooth: Bluetooth® 5.3
Bluetooth Protocol: HFP / A2DP / AVRCP
Input: 5V 0.5A
Working Temperature: 0 ℃ ~ 45 ℃
Frequency Band: 2.400 GHz ~ 2.4835 GHz
The specifications are acquired from laboratory tested data.
- The playback time, tested under the laboratory condition of AAC format and 50% volume, may vary with different device setting, environments, usage and other factors.
Manufacturer: Tiinlab Corporation
Address: No. 3333, Liuxian Avenue, Tower A, 35th Floor, Tanglang City, Nanshan
District,
Shenzhen, China
Product information can be found at www.1more.com
Made in China
Customers Support
Manufacturer: Tiinlab Corporation
Add: No. 3333, Liuxian Avenue, Tower A, 35th Floor,
Tanglang City, Nanshan District, Shenzhen, China
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier:
Trade Name: 1MORE
Model No.: EC305
Responsible Party ‒ U.S. Contact Information
1MORE USA, Inc.
Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California, 92121
Tel: 1-855-551-6673
E-Mail: support@1moreusa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>