CRMETA 20220510 LED Floor Lamp Light User Manual

CRMETA 20220510 LED Floor Lamp Light

Product Introduction

• Lamp Head × 1
• Base × 1
• Remote Control × 1
• Remote Control Battery × 2
• Light Pole × 3
• Adapter × 1/
• User Manual × 1

When adjusting the angle, do not bend the gooseneck hose excessively to avoid damage.

Specifications

Function Introduction

This floor lamp can be controlled in 2 ways by using the control panel and the remote control. It can memorize the mode before turning off without cutting off the power. Either control by remote control or control panel.

Control Pannel

Remote Controll

• Click it, the indicator flash once then it is set up to turn off the light 1H later;
  Click it, the indicator flash twice, then the 1H timmer is canceled.

• Brightness increase, 9 levels, 20%-100% bright

• Brightness decrease, 9 levels, 100%-20% bright

• Turn on/off the floor lamp with single click

• Click it to switch to the brightest mode but not change the light

• Color temperature Color temperature increase, 5 levels, 2000-6500K

• Color temperature decrease, 5 levels, 6500-2000K

Trouble Shooting

If the lamp does not light up or flicker, please check and deal with it by the following methods:

1. Check whether the adapter used is the dedicated power adapter for the lamp.
2. Please try to change a socket (check whether the socket is broken or not).
3. Check whether the DC plug and the power supply hole of the lamp are fully inserted in place. After trying the above 3 methods, the problem has not been solved, please contact with the seller.
4. If the remote control cannot control the lamp, please check whether the battery is installed, or try again after replacing the battery.

Easy to Install

1. Connect pole 1 with pole 2
2. Connect the pole end with the base, make sure it is stable enough.
3. Connect the lamp head part with the light pole, make sure it won’t loose.
4. Plug the DC plug into the power supply hole on the back of the control panel, then it is installed completely.

Notice:
The height of the lamp can be adjusted by removing the bottom 2 light poles, do not remove the lamp pole which is connected with the control pannel.

Please read the following notes carefully before use

Precautions:

1. Please use the dedicated power adapter comes with the floor lamp.
2. Do not look directly at the light source that is turned on, so as not to cause discomfort.
3. When adjusting the angle, do not bend the gooseneck hose excessively to avoid damage.
4. Lamps are only used indoors.
5. Do not use this product on the surface of high temperature, flammable objects or in humid environment to avoid damage or short circuit.
6. Do not disassemble the internal components of the lamp by yourself, so as to avoid unnecessary losses.
7. Please cut off the power supply when cleaning products.
8. The light source of the lamp is irreplaceable. When the light source reaches the end of its life, the entire lamp should be replaced.
9. The lamps cannot be placed on a plane with an inclination angle greater than 6°, otherwise the lamps cannot be guaranteed to be stable.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>