Storcube STC03 Portable 300M Power Station Instruction Manual

: June 17, 2024
: Storcube

Table of Contents

Storcube STC03 Portable 300M Power Station
Product Usage Instructions
Product Appearance Illustration
Display Screen Illustration
Methods of Charging
Technical Parameters
Troubleshooting

Storcube STC03 Portable 300M Power Station

Storcube-STC03-Portable-300M-Power-Station-product-
image

Specifications:

Model: STC 03/300M
Output Power: 100W (PD100W)
Input: DC Input, Anderson Input
Outputs: Type-C, USB3.0, USB-A, DC 12V, Car Charging Output, AC Output
Features: LED Flashlight, Cooling Fan, LED Light Switch, AC Switch
Display Screen: Battery Level Indicator, Battery Percentage Display, Output Status Indicator, Input Power Display, Output Power Display, Output Frequency Indicator

Product Usage Instructions

Charging Failures:

Problem: The indicator fails to light up.
Cause: Bad connection between adapter and device.
Solution: Check and ensure a good connection; contact support if needed.

No Power to the Outlet:

Cause: Ambient temperature is too low.
Other Causes: Poor connection, overload, low battery power.
Solution: Charge in warmer conditions, use proper connectors, manage load power.

Product Appearance & Function Illustration:
Detailed description of each interface including LED indicators, switches, and input/output ports.

Display Screen Functions:

Battery level indicator
Low battery notification
Battery percentage display
Thermometer icon for high temperature warning
Output status indicator
Input & Output power display
Output Frequency indicator for AC output

Frequently Asked Questions (FAQ):

Q: What should I do if the device stops charging?
A: Check the connection between the adapter and device, ensure proper power supply, and contact support if needed.
Q: How to use the LED flashlight feature?
A: Locate the LED Light Switch on the device and toggle it to activate or deactivate the flashlight.

Product Appearance Illustration

Function Illustration of Product Interfaces

$Storcube-STC03-Portable-300M-Power-Station-$1$$

$Storcube-STC03-Portable-300M-Power-Station-$2$$

USB-A Switch
Type-C Output/Input
USB3.0 Output
USB Output
DC Switch
12V/DC Output
Car Charging Output
DC Input
Anderson Input
LED Flashlight
Cooling Fan
LED Light Switch
AC Output
AC Switch

Display Screen Illustration

$Storcube-STC03-Portable-300M-Power-Station-$3$$

Remaining output time: Calculate the remaining output time automatically according to diﬀerent electrical load.
Battery level indicator :According to the percentage, the power is divided into 11 grids.
The more power indicator grids, the more suﬃcient power.
Low battery notiﬁcation: Low battery warning indicator will ﬂash when the battery level is lower than 10%.
Battery percentage display: Show the battery percentage.
Thermometer icon ：When the device temperature is too high, the thermometer icon will ﬂash.
Output status indicator: Display output status including DC, AC, USB-A,USB-C and LED.
Input Power :Display the charge power.
Output Power” Output power drawn by the electrical load.
Output Frequency: When the 50Hz or 60Hz icon is on, the AC output frequency is 50Hz or 60Hz.

User Guide

It is recommended to keep the device fully charged before using it for the ﬁrst time in case of any inconvenience caused by insuﬃcient power.
After pushing the switches ①、⑤、⑭, the corresponding function icon on the screen will light up, and the corresponding outlet will be powered. Then you can use it according to your needs. TYPE-C is plug and play.
You can change the frequency of AC supply according to the instruction manual of the electrical equipment or the local standards by pushing the ⑭ button three times. The frequency will be displayed on the screen.
When the outlet is not in use, please press the corresponding button to switch it oﬀ and save the power. If the icon on the screen is dim, it indicates that the power to the outlet is oﬀ.
High and low temperature may aﬀect the service time of the product, so it should be used within the working temperature of 14℉~104℉.

Methods of Charging

There are two charing ports:
Anderson charging port and DC charging ports(diameters: 5.5mm*2.1mm). (Please use the standard charger for charging.) When the device is being charged, the charge power and battery level will be displayed on the screen. When it is fully charged, it will automatically stop charging.

It takes about 3 hours to get this device fully charged using standard adapter.
It takes about 6 hours to get this device fully charged through the car cigarette lighter socket.
(Please keep the car engine running in case it drains the car battery.)
It takes about 4 hours to get this device fully charged using a 100W solar panel.（Ideal situation）

Technical Parameters

Technical Indicators	Parameters
Battery energy	294.4Wh

All the data above are collected through experiments.

Packing List

Portable power station*1
Power adapter*1
Car charger cable*1
Introduction manual *1.

Troubleshooting

Problems	Causes	Solutions
Charging Failures	The indicator on the screen fails to light up; there could
be bad connection between the adapter and the device.	Check if there is a bad

connection between the adapter and the socket and make sure the socket is powered.
The indicator on the screen fails to light up. And there is green light on the adapter.| Check if there is a bad connection between the adapter and the device; please contact our after-sales service team for further help.
The indicator on the screen lights up, but still no charging| Please remove the adapter and contact our after-sales service team.
The ambient temperature is too low.| Please charge the device where the ambient temperature is greater than 0℃.
Other causes| Please contact our after-sales service team.
No Power to the Outlet| The poor connection between the device and the cable.| Keep the device and the cable in good connection. Please use the universal connectors.
The circuit protection is activated owing to overload.| For high current DC output, please use a car cigarette lighter adapter cable to connect. For AC output, please make sure the power of the electrical equipment conforms to the speciﬁcation of this device.
The battery power of the device gets low.| Please recharge the device.
The ambient temperature is too low.| Please use the device where the ambient temperature is greater than -10℃ in case the low temperature protection is activated.
The power drawn by the load is far more than what is allowed in the speciﬁcation.| Please stop using the device.
No Power to the Outlet| Other causes.| Please contact the after-sales service team.
---|---|---
The power is cut oﬀ when the device is discharging| The battery power of the device gets low.| Please recharge the device.
The power of the electrical equipment gradually exceeds what is allowed in the speciﬁcation.| Please use the equipment after power de-rating or contact our after-sales service team for device of larger power.
The over-temperature protection is activated.| Please use the device after it cools down.
The motor in the electrical equipment like electrical fan, hair dryer or hand drill is not soft motor.| If the equipment is adjustable, please start it after power de-rating.
Short circuit of your electrical equipment| Please stop using the equipment.
Short circuit of this device| Please contact the after-sales service team.
Other causes| Please contact the after-sales service team.

Warranty

Warranty Terms

Please keep this warranty card properly for future service request.
Please do not damage the warranty sticker on the connecting part of the product casing.
The warranty period is valid for twelve months from the date of purchase.
During the warranty period, if the product itself has quality problems or malfunctions, the oﬃcial after-sales personnel will verify that it is true. Repairs and replacement parts will be provided free of charge.
The company reserves the right to modify and interpret all content.

This warranty does not cover product problems related to the following

The product is damaged owing to failure to follow operation instructions or misuse.
The warranty sticker on the product is removed or unauthorized teardown of the product.
The product number has been changed or does not conform to this manual.
The product was placed in an extreme environment not for its reasonable use including immersion, shaking, high temperature, and corrosive environment, which led to evident damage of the product.
Product failure caused by external causes beyond our reasonable control including accidents and natural disasters.

Warnings and precautions

Maintain your children’s safety by keeping this product out of their reach.
Please do not tear down this product. Any unauthorized disassembly will void the warranty.
Please use the accessories came with the device or recommended by customer service team.
Please use the product in a well-ventilated and dry place.
Please do not charge the product if the ambient temperature is under -10°C.
Please keep this product away from ﬂammable substances and high-temperature environment.
When put in storage, please keep the battery power level between 50%~70%, and put it in a ventilated and dry place.
When put in storage, please charge the products at least once every three months.
It is forbidden to hammer or pitch the product violently.
To prevent electrical shock, it is forbidden to use broken or defective cable as the connector.
It is forbidden to forcefully shutdown the power station.
AC output port supports 300W resistive load.
When all output ports are used at the same time, the maximum output power shall not exceed 300W.