ATAG VA8214LU Built In Dishwasher Installation Guide
- June 17, 2024
- ATAG
Table of Contents
ATAG VA8214LU Built In Dishwasher
Specifications
| Component | Size | Quantity | Tool Required |
|---|---|---|---|
| Screws | 38 mm | 6x | Torx T20 |
| Screws | 25 mm | 2x | Torx T20 |
| Dowels | 40/25 mm | 3x | — |
| Model Size | XL / XXL | — | — |
| Min. Distance | 14 mm | — | — |
Product Assembly Instructions
Step-by-Step Assembly Guide
- Identify all parts and tools required for the assembly. This includes various sizes of screws, dowels, and a Torx T20 screwdriver.
- Begin assembly according to the diagram, ensuring to follow safety guidelines and wearing protective gloves when necessary.
- Attach side panels to the base using the provided screws, ensuring each panel is secured with the correct number of screws.
- Secure back panel to the side panels, aligning all edges and fastening with screws.
- Install the top panel by aligning it with the side panels and securing it with the appropriate screws.
- Ensure that all panels are properly aligned and that the minimum distance of 5 mm between panels is maintained.
- Attach door hinges, making sure they are level and at the correct distance from the edges as indicated in the diagrams.
- For certain models, additional components may be installed as per the provided diagrams.
- Adjust feet or base levelers to ensure the unit is stable and level.
- Check that all parts are securely fastened and that doors operate smoothly with the auto-open feature if applicable.
Important Information
- Do not exceed the maximum load capacity indicated for shelves and the overall unit.
- Ensure there is a minimum gap of 14 mm for hinge clearance and a maximum pipe length of 4.5 m for any plumbing connections.
- For the push-release mechanism, maintain a distance of 1.5 cm to ensure proper function.
- Adhere to the noise level restrictions where applicable, with a minimum of 575 mm for a 38 dB noise level.
What In The Box
Installation Instructions
Information
FAQ
- What tools are needed for assembly?
- A Torx T20 screwdriver is required for screwing in the various sized screws provided.
- Are there different size specifications for the unit?
- Yes, the unit comes in two sizes: XL and XXL.
- Can the door hinges be adjusted after installation?
- Yes, the door hinges should be adjustable to ensure proper alignment and operation of doors.
- What should be the minimum clearance for hinge installation?
- There should be a minimum clearance of 14 mm for hinge installation.
- Is there a maximum length for plumbing connections?
- Yes, the maximum pipe length for any plumbing connections is 4.5 m.
- What is the push-release mechanism’s required distance?
- For the push-release mechanism to function properly, maintain a distance of 1.5 cm.
We reserve the right to make changes. For any further assistance, please refer to the article number 8822754-03.
Read User Manual Online (PDF format)
Loading......