RAVEMEN CR1000 Bike Light Instruction Manual

RAVEMEN CR1000 Bike Light

Technical Specifications

• LED: 1* high-efficiency white LED
• Battery : 4000mAh/3.6V rechargeable Lithium-ion battery
• Dimensions (Headlight): 104mm (L)29mm (W)32mm (H)
• Weight (Headlight): 140g
• Materials : The main body is made by anodized aluminum; the rear part and the accessories are made by durable plastic and glass fiber, etc
• Package includes : front bike light1, silicone rubber band handlebar mount1, USB cable1, wired remote button1, 0 ring *2

Performance Parameters

Note : The above data are tested in Lab in line with ANSI/NEMA FL1 standard and may vary by environment and user conditions.

Quick Guide

• Power button : Long press the button 0.5s to turn on/off power; Single click to cycle through brightness levels.
• Battery indicator : Green:>35% power; Red: 10%-35% power;
• Red flash : <10% power. When the battery is below 2%, the light will flash every 10 seconds, please charge the light soon.
• Micro USB charging: Standard charging time: 3h with Max input: 5V, DC/ 2A (approximate values and may vary by user conditions). Built-in over-charge protection.
• Charging indicator: The red indicator is flashing when charging and turns to constant green when completed.
• Wired remote button : When power is on, single click to cycle through brightness levels; Press 0.3s and hold to activate Emergency mode, and release to go back to the previous brightness level.
• Other features : Intelligent thermal management circuit to prevent overheat of LED; Mode Memory circuit to remember the last used brightness level.

Battery runtime extension

The light can be powered by power bank to extend the runtime of the battery and the max output will be around 800 lumens.

Mounting Your Light

1. Secure the silicone rubber band on the handlebar (check the mount whether it is tightened or not before each ride):
2. Slide the headlight in the right direction to connect with the handlebar mount and adjust the angle for actual needs. The mount is 10 degrees left to right horizontally adjustable.
3. Press and hold the quick-release tab and slide out the light.
4. Plug the wired remote button into the tail Micro USB port and use the O ring to fix it near the grip as below:

Attention!

For your safety, please read this manual thoroughly and use your light accordingly.
Make sure the Light is mounted securely on the handlebar each time before riding.
Release the bike light from the handlebar mount while in the outdoors in case of theft.

To maintain the best performance and extend the life of the Lithium-ion battery:

1. Check the battery and charge the battery up before your first ride.
2. Avoid completely discharging, allow partial discharges, and avoid overcharging (usually).
3. Keep and store your light at room temperature.
4. Charge your light to 50% full every 3 months for long-term storage.

Alert!

Don’t stare the light directly when on, otherwise it may cause temporally blindness. For others’ safety, don’t shine the light directly to oncoming vehicles and pedestrians. Keep the light away out of children’s reach. And children should be accompanied by adults when using the light.

Don’t disassemble or modify the light, otherwise it may cause danger and void your warranty.

Warranty

We proudly claim and warrant our products free of defects in material and workmanship for 2 years from the day of purchase under normal use. Accessories and spare parts are warranted for 1 year. If a covered defect occurred, return the  light to the place of purchase. If this happens within 15 days from the day ofpurchase, we will replace the defective product with a brand new one without extra charges; After 15 days from the day of purchase, handling and transportation charges shall be borne by person desiring service. Limited lifetime warranty is also available after 2 years warranty period and the cost of service and spare parts will be charged accordingly.

Warranty Exclusions:

1. Without original sales receipt or proof of the purchase
2. Normal wear and tear and normal battery deterioration
3. Unauthorized modifications or alterations, improper use and maintenance

• Website: www.ravemen.com
• Tel/Fax : +86-755-29064166
• Email : service@ravemen.com
• Address : 501, Building A, Nankeng 2nd Industrial Park, Bantian, Longgang, Shenzhen 518129, China

Scan and like our Facebook page for more info and service:

• Thanks for purchasing the Ravemen product.
• Important : For your safety, read this manual thoroughly before using the product and keep it properly for future reference.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>