Thermador PO302W 30 Inch Stainless Steel Double Electric Wall Oven Owner’s Manual

PO302W

30-INCH DOUBLE BUILT-IN OVEN

PROFESSIONAL SERIES

FEATURES & BENEFITS

– Specially crafted gray glass on stainless steel for a luxurious look and finish
– Designed for flexibility — standard or flush installation into kitchen cabinets
– SoftClose® door ensures ultra smooth closing of the oven door
– Full Access® telescopic rack
– Fast 2-hour self clean mode
– Fast preheat (around 7 minutes)

ACCESSORIES (INCLUDED)

Upper Cavity: 1 Telescopic and 2 Standard Oven Racks, Meat Probe, Broil Pan; Lower Cavity: 1 Telescopic and 2 Standard Oven Racks

GENERAL PROPERTIES

Heating Modes – Upper Cavity

(13) Bake, Broil, Roast, Convection Bake, Convection Broil, Convection Roast, Proof, Warm, Pizza, True Convection, Dehydrate, Speed Convection, Slow Roast

Heating Modes – Lower Cavity

(13) Bake, Broil, Roast, Convection Bake, Convection Broil, Convection Roast, Proof, Warm, Pizza, True Convection, Dehydrate, Speed Convection, Slow Roast

Upper Cavity

| Easy Clean, Self Clean

Lower Cavity

| Easy Clean, Self Clean
Telescopic Rack(s)| 2
Illumination Type|

Upper Cavity

| Halogen

Lower Cavity

| Halogen
Interior Lights|

Upper Cavity

| 2

Lower Cavity

| 2
Home Connect® (Wi-Fi Enabled)| Yes

OVEN PERFORMANCE

Bake / Broil Element |

Upper Cavity

| 2,400 / 3,800 W
---|---|---

Lower Cavity

| 2,400 / 3,800 W
Convection Element|

Upper Cavity

| 2,000 W

Lower Cavity

| 2,000 W

TECHNICAL DETAILS

DIMENSIONS & WEIGHT

Overall Appliance Dimensions (HxWxD)| 52 1/16 ” x 29 3/4 ” x 24 1/2 “
---|---
Trim Overlaps (Top – Sides – Bottom)| 3/8 ” to 2″ – 9/16 ” – 0″
Required Cutout Size (HxWxD) – Standard| 50″ – 51 1/2 ” x 28 1/2 ” x 23 1/2 “
Required Cutout Size (HxWxD) – Flush| 52 3/16 ” x 30″ x 24 1/2 “
Oven Cavity Size| Upper Cavity| 4.5 cu. ft.
Lower Cavity| 4.5 cu. ft.
Overall Oven Interior Dimensions (HxWxD)| 17 3/4 ” x 24″ x 17 7/8 “
Usable Oven Interior Dimensions (HxWxD)| 13 1/2 ” x 21 5/8 ” x 16 1/4 “
Net Weight| 323 lbs

WARRANTY

30-INCH DOUBLE OVEN

Double Oven Wall Mount Installation
Double Oven Bottom Hinge

measurements in inches (mm)

1. 28 7/16″
   (722 mm)

2. 29 3/4″
   (756 mm)

3. 50″
   (1270 mm)

4. 52 1/16″
   (1324 mm)

5. 22 3/8″
   (568 mm)

6. 23 1/2″
   (597 mm)

7. 24 1/2″
   (622 mm)

8. 49 3/4″
   (1264 mm)

**Door Handle Depth***

Professional Series Handle

2 5/8″ (67 mm)

*Protrusion of handle from door skin

Double Oven
Wall Mount Installation

1. 28 1/2″
   (724 mm)

2. 23 1/2″ (597 mm)

3. 50″-51 1/2″
   (1270-1308 mm)

4. 4 3/4″- 14 7/8″
   (121-378 mm)

• For double ovens installed into a wall cabinet, the junction box may be located above or beneath the unit within reach of the power cord.

**For oven installation in a wall cabinet, the control panel overlap is a min. 3/8″ (10 mm) to max. 1 1/4″ (25 mm).

measurements in inches (mm)

Double Oven Flush Mount Installation
Top View Bottom Hinge Door

measurements in inches (mm)

1. 1″
   (25 mm)

2. 3/4″
   (19 mm)
   reveal cleats

3. 24 1/2″
   (622 mm)
   flush inset depth

4. 28 1/2″ (724 mm)

5. 30″ (762 mm)

Double Oven Flush Mount Installation
Side View Right Hinge, Left Hinge and Bottom Hinge

measurements in inches (mm)

1. 1″
   (25 mm)

2. reveal cleats

3. 52 3/16″
   (1326 mm)
   flush cut-out height

4. 24″ 1/2
   (622 mm)

INSTALLATION DETAILS

Standard installation
Single oven, double oven or combo oven over warming or storage drawer

measurements in inches (mm)

1. 28 1/2″
   (724 mm)

2. 23 1/2″
   (597 mm)

3. Single oven, double oven or combo oven cut-out height

4. Minimum 3/4″ (18 mm) required between cut-outs.

5. 9 1/4″
   (235 mm)

6. min. 4 3/4″
   max. 18″
   (121-457 mm)

• Wall oven junction box may be located above or to the right or left of the unit within reach or the power cable.

**Electrical hook-up may be located below (depending on space) or next to the drawer within reach of the power cable.

Flush installation
Double or combo oven over storage or warming drawer

Side view

measurements in inches (mm)

1. Cleats

2. 1″
   (25 mm)

3. Double or combo oven cut-out height

4. minimum 1/2″ (13 mm) required between cut-out*

5. 9 9/16″
   (243 mm)
   flush cut-out height

6. “24 1/2”
   (622 mm)

*IMPORTANT: Base has to be able to support the weight of the oven. Please check oven manual for minimum weight requirements.

Warming drawer
**For WD30W, the installed dimension may differ. This is based on 3/4″ (19 mm) thick custom panel.

These warranties give you specific legal rights and you may have other rights that vary from state to state. Limited warranty from date of delivery. For complete warranty details, refer to your Use & Care manual, or ask your dealer.

Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada.

1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2023 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>