insinkerator 13946 Tamper Proof Screw Kit Installation Guide
- June 17, 2024
- InSinkErator
Table of Contents
Tamper Proof Screw Kit (#13946)
13946 Tamper Proof Screw Kit
Installation Instructions
WARNING
ELECTRICAL SHOCK
Turn off the electrical supply to the disposer before servicing. Test the
circuit with a voltmeter or circuit tester to ensure the power is off.
-
Remove 1/4–20 machined screw (4).
-
Install 1/4–20 tamper proof screw (2).
NOTE: Make sure the tamper proof screw is installed through the top cover retainer (3) as the original machine screw was (see Figure 1). -
Tighten tamper proof screw until securely seated using the hex key (1) provided.
-
Repeat steps 1 thru 3 for each screw.
NOTE: Retain hex key for future service.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>