JBL Go 3 Portable Bluetooth Speaker User Guide
- June 17, 2024
- JBL
Table of Contents
Manuals+ — User Manuals Simplified.
JBL GO 3 Manual
Home » JBL » JBL GO 3 Manual
QUICK START GUIDE – GO3
WHAT’S IN THE BOX
Bluetooth pairing
PLAY
CHARGING
WATERPROOF DUSTPROOF IP67
TECH SPEC
Transducer: 43 x 47 mm / 1.5”
Output power: 4.2 W RMS
Frequency response: 110 Hz – 20 kHz
Signal-to-noise ratio: > 85 dB
Battery type: Li-ion polymer 2.7 Wh
Battery charge time: 2.5 hours (5 V 1 A)
Music play time: up to 5 hours (dependent on volume level and audio content)
Bluetooth® version: 5.1
Bluetooth® profile: A2DP 1.3, AVRCP 1.6
Bluetooth® transmitter frequency range: 2400 MHz – 2483.5 MHz
Bluetooth® transmitter power: ≤ 8 dBm (EIRP)
Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
Dimensions (W x H x D): 87.5 x 75 x 41.3 mm / 3.4 x 2.7 x 1.6 ”
Weight: 0.209 kg / 0.46 lbs
**** To protect battery lifespan, fully charge at least once every 3 months.
Battery life will vary due to usage patterns and environmental conditions.
Do not expose the JBL Go 3 to liquids without removing the cable connection.
Do not expose JBL Go 3 to water while charging. It may result in permanent
damage to the speaker or power source.
After a liquid spill, do not charge your speaker until it’s completely dry and
clean. Charging when wet might damage your speaker.
When using an external adapter, the output voltage/ current of the external
adapter should not exceed 5V/3A.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license.
Other trademarks and trade names are those of their respective owners.
JBL GO 3 Manual – Optimized PDF
JBL GO 3 Manual – Original PDF
Manuals+, home privacy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>