MELA 050922 Vanities Basins Tapware Mirrors Baths User Guide

MELA 050922 Vanities Basins Tapware Mirrors Baths

CABINETRY

• MATERIAL: MD (Medium Density Fibreboard) / Particlebard
• FINISHES: Gloss White (2PAC), Matt White (2PAC), Matt Grey (2AC), Snafell (Melamine), Walnut (Melamine) Dracula Oak (Melamine), Sorrento Oak (Melamine)

CLEANING AND MAINTENANCE

• Towel dry the surface regularly after use or when cleaning Clean regularly with a damp microfibre cloth and a natural cleaner. Make sure to wipe off any residue from the surface and towel dry immediately Always clean spills and water immediately off cabinet surface

CAUTION

• Limit exposure to high levels of salt
• Hair dye, bleaches, boot polish and similar chemicals will discolour the surface if not removed immediately
• Do not put heat directly on surface
• Do not use chemicals or abrasive cleaners. This includes:

  •   * Bleach and bleaching agents

  • Ammonium and ammonium agents
  • Highly acidic cleaners
  • Alcohol and mineral-based solvents

STONE TOP

MATERIAL: Engineered Stone 20mm Thickness

CLEANING AND MAINTENANCE
To keep your stone top clean, simply wipe with a soft cloth and a pH neutral household liquid detergent.

• Use a silicone mat to protect surface from hot objects

CAUTION

• Avoid exposure to paint strippers, paint removers, bleach and nail polish remover. Rinse immediately with clean water to neutralise the effect, and then follow usual cleaning procedure.
• Avoid exposure to high impact, especially on the edges Avoid excessive weight being placed on the benchtop, such as tradespeople standing on the benchtop when carrying out other work in your home such as painting or electrical work.

TOILET SUITS AND BASINS

MATERIAL: Vitreous China
FINISHES: Gloss White, Matt White, Matt Grey, Matt Black and Matt Pink

CLEANING AND MAINTENANCE

• Towel dry the surface regularly after use or when cleaning
• Clean regularly with a damp microfibre cloth
• Use a mild household detergent or warm soapy water
• Toilet Seats – At regular intervals the tightening of the seat hinge bolts may be necessary as loosening may occur due to use

CAUTION

• Avoid scourers and rough brushes for cleaning
• Avoid contact with sharp objects which could chip or scratch the surface.
• Do not put heat directly on surface
• Do not use chemicals or abrasive cleaners. This includes:

  •   * Bleach and bleaching agents

  • Ammonium and ammonium agents
  • Highly acidic cleaners
  • Alcohol and mineral-based solvents

If your product encounters any of these chemicals, rinse immediately with warm soapy water as these products will remove the surface gloss coating.

MATERIAL: Plastics

CLEANING AND MAINTENANCE

• Towel dry the surface regularly after use or when cleaning
• Clean regularly with a damp microfibre cloth
• Use a mild household detergent or warm soapy water

CAUTION

• Do not put heat directly on surface
• Avoid contact with sharp objects which could chip or scratch the surface.
• Discolouration may occur in contact with Idoine, Mercurochrome solutions, boot polish, hair dye, bleaches, and acetone
• Do not use chemicals or abrasive cleaners. This includes:

  •   * Bleach and bleaching agents

  • Ammonium and ammonium agents
  • Highly acidic cleaners
  • Alcohol and mineral-based solvents

If your product encounters any of these chemicals, rinse immediately with warm soapy water.

TAPWARE, OUTLETS, SHOWER OUTLETS AND ACCESSORIES

MATERIAL: Solid Brass, Stainless Stells and ABS

FINISHES: Chrome, Matt Black, Brused Nickel, Brushed Brass and Gun Metal Electroplating – a process that uses an electric current to dissolve metal to form a metal coating. PVD – a process that refers to a thin film deposition technique where a solid material is vaporised in a vacuum environment and deposited on substrates as a pure material or alloy compostion coating

CLEANING AND MAINTENANCE

• Use natural cleaning products only and no abrasive cleaning cloths
• Weekly cleaning with warm soapy water and a microfibre cloth is recommended
• Dry after each use to reduce watermarking and surface rust
• Tapware aerator is recommended to be cleaned every 6 months
• To best maintain finish, do not let water pool

CAUTION

• Do not use disinfectant to clean stainless-steel parts or components
• imit exposure to high levels of salt
• Avoid scourers and rough brushes for cleaning
• Avoid contact with sharp objects which could chip or scratch the surface.
• Do not use chemicals or abrasive cleaners. This includes:

  •   * Bleach and bleaching agents

  • Ammonium and ammonium agents
  • Highly acidic cleaners
  • Alcohol and mineral-based solvents

If your product encounters any of these chemicals, rinse immediately with warm soapy water as these products will remove the finish.

STAINLESS STEEL SINKS

MATERIAL:
Stainless Steel and Stainless Steel Black

CLEANING AND MAINTENANCE

• Rinse and dry after every use
• Thoroughly at the end of the day use a soft sponge and detergent to wipe down the sink in the direction of the sinks brushing. Rinse with warm water and clean microfiber cloth to dry
• Use clean biodegradable products like bi-carb soda, vinegar, and lemon to remove stubborn limescale. Rinse with clean water and towel dry after.
• Once a month use a stainless-steel polish to polish the sink. When polishing use a soft cloth and apply in the direction of your sink brushing
• Stainless steel is rust resistand rather than scratch resistant.

CAUTION

• Do not use plastic scourer, steel wool or a prickly brush, these will scratch the surface
• Do not over polish as this may cause permanent changes to the apperance of the surface
• Do not use chemicals or abrasive cleaners. This includes:
• Bleach and bleaching agents
• Ammonium and ammonium agents
• Highly acidic cleaners
• Alcohol and mineral-based solvents

MIRRORS

MATERIAL: Glass with silvering material

CLEANING AND MAINTENANCE

• For best results clean mirrors using 30% methylated spirits to 70% water ra?o
• Avoid water getting on the back and sides
• Wipe around the edge to avoid salt build up

CAUTION

• Do not use Windex or similar cleaning products
• Do not use chemicals or abrasive cleaners. This includes:

  •   * Bleach and bleaching agents

  • Ammonium and ammonium agents
  • Highly acidic cleaners
  • Alcohol and mineral-based solvents

If your product encounters any of these chemicals, rinse immediately with warm soapy water as these products will remove the finihs,

SHOWER SCREEN

MATERIAL: 10mm Toughened Safety Glass

CLEANING AND MAINTENANCE

• Regularly clean your shower screen to maintain a scum free surface
• Use a mild household detergent and clean with a wet cloth. Rinse thoroughly with fresh water.
• If necessary, you can use a 30% methylated spirts to 70% water ratio to remove soap scum
• Use a squeegee to dry the area off and assist with a clean streak free surface
• Thoroughly rinse down the shower area with clean water at the end of each use

CAUTION

• Do NOT use Windex or similar cleaning products
• Do NOT use disinfectant to clean stainless-steel parts or components
• Never use harsh chemicals or abrasive cleaners as these will scratch the surface
• Do not use chemicals or abrasive cleaners. This includes:

  •   * Bleach and bleaching agents

  • Ammonium and ammonium agents
  • Highly acidic cleaners
  • Alcohol and mineral-based solvents

BATHS

MATERIAL: Acrylic

CLEANING AND MAINTENANCE

• Use mild household detergent or warm soapy water to clean with a soft cloth followed by a freshwater rinse
• Clean any marks or stains as soon as they occur
• For stubborn marks use Magic sponge with water

CAUTION

• Limit exposure to high levels of salt
• Do not put heat directly on surface
• Avoid scourers and rough brushes for cleaning
• Avoid contact with sharp objects which could chip or scratch the surface
• Never leave a candle burning unattended
• When using essential oils, bath crystals/bath bombs, firstly test that the colour won’t stain your bath and always add into a bath full of water. Never poor directly into an empty bath
• Do not use chemicals or abrasive cleaners. This includes:

• •   * Bleach and bleaching agents

    • Ammonium and ammonium agents
    • Highly acidic cleaners
    • Alcohol and mineral-based solvents

If your product encounters any of these chemicals, rinse immediately with warm soapy water as these products will remove the finihs,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>