ESAB SL60 Cutmaster 30+ Plasma Cutting Machine User Guide
- June 17, 2024
- ESAB
Table of Contents
Cutmaster® 30+
The total portable plasma cutting package
SL60 Cutmaster 30+ Plasma Cutting Machine
Cutmaster 30+ is the perfect combination of power and portability for hand-
held plasma cutting machine.
Plus means more, so we’ve added a user-friendly 10.9 cm TFT LCD screen and
upgraded features that give you even more control and flexibility to master
any cut up to 10 mm. Together with the SL60 1Torch, it all adds up to the
total plasma cutting package.
Industry
- Industrial and General Fabrication
- Light Fabrication
- Industrial Production & Manufacturing
- Automotive Bodies
- Hobbyist
- Agricultural Equipment
- HVAC
- Repair and Maintenance
- Pipeline
- Training Schools
Simple and intuitive TFT LCD panel
Recommended pierce and cut capacity: 10 mm Maximum edge cut capacity: 16
mm
- Portable and durable with three handles and lightweight, industrial all-weather housing
- Bright 10.9 cm TFT LCD display with glove-friendly adjustment knob simplifies use and provides greater control and flexibility
- Dual input 120-240 V, 1 ph power with automatic voltage detection that sets max output amperage
- Comes with industrial SL60 1Torch featuring 2T/4T function, safety trigger lock, and double-tap trigger to conserve bottled air
- Switch between normal and grate cutting modes
- Automatic air pressure detection and post-cut air purge to expand consumable life
- 40% duty cycle @ 30 A (120V) 100% @ 20 A (120V)
- Cutmaster Black Series consumables included for up to 60% longer life
- Industry leading 3-year warranty on power supply and 1-year warranty on torch and leads
Visit esab.com for more information.
Specifications
Amperage Output | 10 – 30 A, continuously adjustable |
---|---|
Recommended Generator Size | 6.5 kW |
Recommended Cut and Pierce Capacity | up to 10 mm |
Maximum Edge Cut Capacity | 16 mm |
Open Circuit Voltage (OCV) | 290 V |
Input Voltage | 120 – 240 VAC +/- 10%, 50/60 Hz, 1ph |
Rated Duty Cycle | 40% @ 30 A, 100% @ 20 A |
Amperage Draw (at Maximum Cut Capacity) | 19 A @ 230 V, 31 A @ 120 V |
(limited output)
Input Power Cable and Plug| 3 m with Shuko plug
Work Lead with Ground Clamp| 4 m 10mm2 work cable with 25 mm² connection
Gas Requirements| Compressed air
Operating Temperature Range| -10° to + 50° C
Compressed Air Pressure Requirement| 90 – 125 psi (6.2 – 8.6 bar) (0.62 – 0.86
Mpa)
Compressed Air Flow Requirement| 80 – 150 l/min (170 – 350 cfh)
SL60 Torch Duty Cycle| 100% at 30 A @ 150 l/min (350 cfh) air flow
Torches – for use with Cutmaster 30+| SL60 1Torch (supplied)
Enclosure Class| IP23S
Certifications| CE, UKCA
Dimensions L x W x H| 465 x 200 x 315 mm
Weight (Including Torch)| 11 kg
Ordering Information
Description | Part Number |
---|---|
ESAB Cutmaster 30+ Package, 230 V 1 ph (Shuko plug) CE/UKCA * | 0559130004 |
Torches
SL60 1Torch and Lead 6.1 m (20 ft) 75° Head| 7-5204
SL60 1Torch and Lead 15.2 m (50 ft) 75° Head| 7-5205
*Cutmaster 30+ power supply, SL60 75° torch with lead, 3 m (10 ft) work lead with ground clamp, consumables kit, regional input power plugs per above, 1/4” regional air fitting. Cutmaster 30+ is compatible with all 1Torch ATC torch connections.
Options & Accessories
Description | Part Number |
---|---|
Cutting Guide Kit | 7-7501 |
Circle Cutting Guide Kit | 7-3291 |
Straight Line Cutting Guide | 7-8911 |
Yellow Leather Lead Cover, 7.6 m (25 ft) | 0700009088 |
Black Leather Lead Cover, 7.6 m (25 ft) | 0700009089 |
Multi-Purpose Cart | 7-8888 |
Single Stage Air Filter Kit | 7-7507 |
Two Stage Air Filter Kit | 9-9387 |
Shoulder Strap | 0445197880 |
Wear & Spare Parts 1Torch
Description | Part Number |
---|---|
Cutmaster Black Series Extended Life Electrode | 9-8214 |
Electrode, SL60 | 9-8215 |
Start Cartridge, SL60 | 9-8213 |
Shield Cup, SL60 | 9-8218 |
Shield Cup, SL60, Max Life | 9-8237 |
Shield Cap, Gouging, Max Life (A – D) | 9-8241 |
Shield Cap Deflector, Max Life (All) | 9-8243 |
Cut Shield, Max Life (20 – 40 A) | 9-8244 |
Tip – Drag (20 A) | 9-8205 |
Tip – Drag (30 A) | 9-8206 |
Tip – “A” Gouging, (40 A Max), Profile: Shallow/Narrow | 9-8225 |
Torch “O” Ring 1 | 8-3487 |
Torch “O” Ring 2 | 8-3486 |
Stand Off Cutting Guide | 9-8251 |
1TORCH Consumables Parts Application Guide
For SL60 and SL100 manual cutting and gouging operations.
DRAG SHIELD CUTTING This is an operatorfriendly method of cutting while
maintaining a constant standoff distance. For metal thickness greater than 6
mm (1/4 in), simply drag the shield cap in contact with the work piece. Use
the shield cup body with the appropriate drag shield cap matching the current
level being used. This method is not recommended for cutting light-gauge sheet
metal.
STANDOFF CUTTIN G The preferred method of cutting metal. Provides maximum
visibility and accessibility. Shield cup for standoff cutting (with the torch
tip 3 to 6 mm (1/8 to 1/4 in) from the work piece). Use the shield cup body
together with the deflector for extended parts life and improved resistance to
reflect heat. This combination provides cutting results similar to the single
piece shield cup, as well as easy changeover to gouging or drag shield
cutting.
GOUGING A simple method of metal removal by angling the torch to a lead
angle of 35°–45° and using a gouging tip. While maintaining a constant
standoff distance, this allows for only a partial penetration into the work,
thus removing metal from the surface. The amount of current, travel speed,
standoff distance, lead angle, and tip size will determine the amount of
material removed and the profile of the gouge. You can use the shield cup body
with either the gouging shield cap or the shield deflector. Also, you can use
the single piece shield cap. ![ESAB SL60 Cutmaster 30+ Plasma Cutting Machine
- Parts](https://manuals.plus/wp-content/uploads/2024/02/ESAB-
SL60-Cutmaster-30-Plasma-Cutting-Machine-Parts.png)Cutmaster® 30+
Semi-Mechanized Systems
For straight line cutting and gouging applications controlled with a simple start stop switch, MechPak from ESAB provides everything you need to allow precision setup and control for many semi-automated applications. The MechPak is compatible with all Cutmaster plasmas that contain the convenient ATC torch style quick connection.
Ordering Information
Description| Part Number
MechPak, 7.6 m (25 ft) Kit| 7-7725
MechPak, 15.2 m (50 ft) Kit| 7-7750
ESAB/ esab.com
XA00255320 GL/EN 05/2023
ESAB reserves the night to alter product images and specifications without
prior notice.
Product mages may not be an exact representation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>