bbluv 6 In 1 Convertible Baby High Chair Instruction Manual

bbluv 6 In 1 Convertible Baby High Chair

Baby multifunctional dining chair

Parts and Accessories

Installation steps

Step 1: Install The Seat Cover and Seat Belt

1. Install the seat leather cover;
2. install the 5-point safety belt.

Tips : pinch the head of the seat belt will be easy to put it through.

Warning: please make sure the 5 point safety belt is installed correctly. (Refer to the picture below)

Step 2: Install the 4 Seat Legs and the leg pads

Press the spring buckle to connect the two parts of the leg

Step 3: Install the 4 legs into the seat base

Insert the chair legs into the buckle

Step 4: Install the Dining Plate

Press the lock buttons on the left and right sides simultaneously with both hands and slide inward.

Step 5: Installation of Footrest and Connecting Frame

1. First attach the longest iron rod to the middle part of the rearfoot with a shorter screw.
2. Then place one end of the short iron rod in turn and tighten it with a nut.(The end of the short bar will not be installed for the time being)
3. Then connect the footrest with a longer screw. Connect the other end of the short iron rod on the back and tighten it with a nut. Be careful! The connecting frame must be installed before using the dining chair

Mode Conversion

1. Remove the safety buckle and press the buttons on both, sides of the chair, the chair will become a bar stool.
2. Remove the lower half of the leg, install the four anti-skid feet, and adjust the angle, the chair will become a children’s chair.
3. Remove the safety buckle and press the buttons on both sides of the chair. The chair will become a kid’s stool.

How do I remove the chair legs?

Press the spring buckle and pull out the leg

Instructions

1. After assembly, adults can carry out load-bearing test, and put the child into the dining chair after confirming safety.
2. Adjust the size of the safety belt and fasten it.
3. Slight shaking of plastic products is normal and does not affect safe use.

Maintenance tips

1. Please wipe the plastic part of the dining chair with a rag with mild soapy water. Do not soak the plastic parts of the product.
2. Do not expose the dining chair to the sun for a long time.
3. Please place this dining chair in a clean and ventilated place.

WARNING!

1. Please read this manual carefully before use and keep it for future reference.
2. Failure to follow these instructions may affect the safety of children.
3. When a child uses a dining chair, the caregiver may not leave.
4. Do not use any part of the dining chair if it is damaged or missing.
5. Before using the dining chair, please check carefully that all parts are installed correctly.
6. When the child is riding, a seat belt must be used to prevent the baby from falling or slipping out of the dining chair and causing serious injury.
7. Please do not use this product when your baby can’t start it alone.
8. Do not disassemble or adjust any part of the dining chair while your baby is in the dining chair.
9. Do not use this product on roads, pool sides, stairs, etc. where it is dangerous.
10. Keep the accessories out of reach of children. Plastic bags and small parts pose a choking hazard to children.
11. The maximum carrying capacity of this dining chair is 15 kg.

WARNING

FALL HAZARD:
Children have suffered severe head injuries including skull fractures when falling from high chairs. Falls can happen suddenly if child is not restrained properly.

• Always use restraints, and adjust to fit snugly.
• Tray is not designed to hold child in chair.
• Stay near and watch child during use.
• The child should be secured in the high chair at all times by the restraining system.
• It is recommended that the high chair be used only by children capable of sitting upright unassisted.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>