bbluv B0105 2 In 1 Digital Thermometer And Hygrometer User Guide

: June 14, 2024
: bbluv

Table of Contents

2-in-1 Digital Thermometer and Hygrometer
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2-in-1 Digital Thermometer and Hygrometer

Please read the instruction manual carefully before use.

(A) Indicator Arrow – Shows comfort levels
(B) Set
(C) Up and Down arrows
(D) Battery compartment
(E) Snooze
(F) Alarm

COMFORT LEVELS

Dry: Humidity below 37%
Comfortable: Humidity between 37% and 72%
Humid: Humidity above 72%

NOTE: The arrow indicating the comfort level will flash if the humidity range is outside the comfort zone (37% to 72%) or if the temperature exceeds the range of 68 °F to 79 °F.

BEFORE USE

Before switching the Igrö on, insert two AAA batteries in the compartment (D) at the back of the device.

TEMPERATURE UNITS – SETTINGS

Press the SET key (B) to switch the unit of measurement from ° C to ° F.

TIME SETTINGS

Press the UP arrow (C) to switch the time display from a 12-hour format to a 24-hour format and vice versa.
Press and hold the SET (B) key until ‘time set’ flashes. Set the hour using the UP and DOWN arrows (C) and press the SET key (B) to switch to minutes. Set the minutes using the UP and DOWN arrows (C) and press the SET (B) key to finish.
If no key is pressed for 20 seconds, the system will automatically save the configured data and exit the time setting mode.

SETTING THE ALARM AND SNOOZE FUNCTIONS

Press the ALARM (F) key to turn the alarm on or off. A bell symbol will appear between the hour and minutes (below the double dots) on the LCD screen when the alarm is on.
Press and hold the ALARM (F) key for 2 seconds to access the alarm setting mode. The time will flash. A bell symbol will also appear between the hour and minutes (below the double dots). Select the hour with the UP and DOWN arrows ( C) and press the ALARM (F) key to switch to minutes. Select the minutes using the UP and DOWN arrows, ( C) then press the ALARM (F) key to exit setup.
If no key is pressed for 20 seconds, the system will automatically save the configured data and exit the alarm setting mode.

At the set time, the alarm will ring for two minutes. The device rings at the following rates:

0-10 seconds: one beep per second;
11-26 seconds: two beeps per second;
27-58 seconds: four beeps per second;
59-120 seconds: continuous beeping until 2 minutes pass.

When the alarm is ringing, press the SNOOZE (E) button to activate snooze mode. A `sleep’ Z Z Z symbol will appear on screen between the hour and minutes (above the double dots). Another alarm will go off after 5 minutes. Press any other key to stop the alarm.

CLEANING & MAINTENANCE

Display the product in a cool and dry place.
Wipe off dust with a soft, damp cloth.
Do not use liquids or abrasive cleaners.
If you do not intend to use the Igrö for a long period of time, remove the batteries from the device.

WARNINGS

Your Igrö is not a toy and should always be used by an adult or a responsible person. Keep out of reach of children.
This device is intended solely for personal use indoors.
Do not modify the device without the manufacturer’s authorization. This could cause improper functioning.
Do not dispose of this product with ordinary household waste. Find out the proper procedure for disposing of electronics in your region.
Do not immerse the device in water or clean it with a wet sponge or wet cloth.