CTA 5570-0065 Universal Removable Cargo Tray Instruction Manual
- June 17, 2024
- CTA
Table of Contents
CTA 5570-0065 Universal Removable Cargo Tray
Product Information
Specifications
- Part Number: 5570-0065
- Description: ADAPT CARGO TRAY
- Material: Metal
- Color: Black
- Dimensions: 24″ x 12″ x 6″
Product Usage Instructions
Installation Instructions
- Using (2X) 1/4-20 X 5/8 Button Head Bolts, fasten the handle to the tray.
- If using the tray for the Lo-Side Toolbox, skip the following steps and discard any remaining parts and hardware. Continue using the tray on the Single Lid and Gullwing toolboxes.
- Using (2X) 1/4-20 X 5/8 Button Head Bolts, (2X) 1/4 Flat Washers, and (2X) 1/4-20 Nylon Lock Nuts install the Left Hand Bracket as shown below. The head of the bolt should be on the outside of the Tray placing the Lock Nuts on the inside.
- Using (2X) 1/4-20 X 5/8 Button Head Bolts, (2X) 1/4 Flat Washers, (2X) 1/4-20 Nylon Lock Nuts install the Right Hand Bracket as shown below. The head of the bolt should be on the outside of the Tray placing the Lock Nuts on the inside.
- Using (2X) 1/4-20 X 5/8 Button Head Bolts, (2X) 1/4 Flat Washers, and (2X) 1/4-20 Nylon Lock Nuts install the Hanger as shown below. The head of the bolt should be on the top of the Tray placing the Lock Nuts on the bottom.
FAQ
Q: Can I use this cargo tray with any toolbox?
- A: The cargo tray is compatible with Single Lid and Gullwing toolboxes. If using it with a Lo-Side Toolbox, special instructions apply.
Q: Are additional installation tools required?
- A: No additional tools are required beyond what is provided with the cargo tray.
INSTALL INSTRUCTIONS
- Using (2X) 1/4-20 X 5/8 Button Head Bolts, fasten the handle to the tray.
- If using the tray for the Lo-Side Toolbox, skip the following steps and discard any remaining parts and hardware.
- Continue using the tray on the Single Lid and Gullwing toolboxes.
- Using (2X) 1/4-20 X 5/8 Button Head Bolts, (2X) 1/4 Flat Washers, and (2X) 1/4-20 Nylon Lock Nuts install the Left Hand Bracket as shown below.
- The head of the bolt should be on the outside of the Tray placing the Lock Nuts on the inside.
- Using (2X) 1/4-20 X 5/8 Button Head Bolts, (2X) 1/4 Flat Washers, (2X) 1/4-20 Nylon Lock Nuts install the Right Hand Bracket as shown below.
- The head of the bolt should be on the outside of the Tray placing the Lock Nuts on the inside.
- Using (2X) 1/4-20 X 5/8 Button Head Bolts, (2X) 1/4 Flat Washers, and (2X) 1/4-20 Nylon Lock Nuts install the Hanger as shown below.
- The head of the bolt should be on the top of the Tray placing the Lock Nuts on the bottom.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>