TinLine ECL5000 Electrical Schema Instructions
- July 7, 2024
- TinLine
Table of Contents
TinLine ECL5000 Electrical Schema
Product Information
Specifications
- Product Name: Electric Components ECL5000
- Manufacturer: TinLine GmbH
- Model Number: 262017
- Release Date: 12.11.2019
Product Usage Instructions
Safety Instructions
Before connecting the system, it is crucial to read and follow the safety
instructions provided below:
-
Check the unit for any damage immediately upon unpacking.
-
Ensure safe operation can be guaranteed; otherwise, take it out
of service and secure it from unintentional operation. -
Electric installation on site must be done by authorized electricians.
-
Make electric connections accessible and switchable.
-
Wiring work must be performed with the power disconnected.
-
Operate only with a downstream ground fault circuit interrupter, max. 30mA Type A.
-
Follow all installation and assembly instructions provided.
Installation Instructions
Follow these steps for proper installation:
- Respect local regulations and protective measures.
- Dispose of the product according to applicable legal provisions.
Frequently Asked Questions (FAQ)
Q: What should I do if I notice damage to the unit? A: If you observe any
damage to the unit, refrain from using it and contact authorized personnel for
assistance.
Electric Components ECL5000
Electrical schema and safety instructions
safety instructions
- The following safety instructions must be read and observed before connecting the system. Failure to do so may result in danger to persons or damage to the system.
- Check the unit for any damage as soon as it is unpacked
- If it is ascertained that safe operation cannot be guaranteed it must be taken out of service immediately and secured from unintentional operation
- The electric installation on site must be undertaken by authorised electricians
- Make the electric connections in such a way that they are always accessible and can be switched off
- Wiring work must be performed with the power disconnected
- The stipulated protection class is only featured for undamaged and complete housing
- Operation only with a downstream ground fault circuit interrupter, max. 30mA Type A.
- Local regulations and protective measures must be observed
- Follow the installation and assembly instructions.
- Any disposal must be performed according to the applicable legal provisions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>