BUCATSTATE Metal Small Animal Cage Instruction Manual

BUCATSTATE Metal Small Animal Cage

Product Overview

• Product brand: BUCATSTATE
• Product Name: Metal Small Animal Cage
• Suitable for: hamsters, golden bears, squirrels, hedgehogs, reptiles, guinea pigs, etc.
• Product SKU: 0.35 m’ -White; 0.35 m’-Black; 0.5 m’ -White; 0.5 m’ -Black
• Product specification:
  • 80cm Metal Small Animal Cage: External dimensions- 804551 cm
  • 100cm Metal Small Animal Cage: External dimensions- 1005052.5cm
  • (There is 1-2cm error by manual measurement)
• Executive standard: Q/440307LY 001-2022
• Product inspection: inspection qualified

Precautions for use

1. Please remove all of the protective films from the acrylic boards before installing.
2. Please close the cage door when you leave.
3. Don’t let the children play at sharp corners to avoid accidental scratches or bumps.
4. Do not place heavy objects or stand on the cage, otherwise, it will cause damage to the structure and function, resulting in deformation or tilt of the cage!
5. Move the cage gently, do not drag and push it hard, so as to avoid breaking the connector or loosening the structure.

If you have any other problems, please be free to contact us by the following email: [email protected]

Introduce the main accessories and materials

Introduce the main accessories and materials of the product

1. Main material description: Top panel – Platemetal; bottom plate – ACP; support bar – Al alloy;transparent plate – acrylic, PS; Connector – ABS

Material list:

Parts Included

Front door accessories

Assembly accessories

Installation Instructions

Installation Instructions (installation of the acrylic front door and transparent switch)

• The ‹ Switch – front buckle> is placed on the outside of the cage, and ‹Switch – back panel› is placed on the inside, installed it on the acrylic front door.

Installation instructions ( install the support bars, transparent panel, and top cover frame )

• Insert the 4 support bar into the bottom Connector of Pre-assembled bottom plate.
• Use hexagon screws, insert them from the bottom side of the bottom connector, and turn them to tighten.
• Tear off the protective film of the other three transparent panels and put the four transparent panels into the slot of the support bars until they are completely stuck.
• Use the top connector to link the top support bars.

Installation instructions (top cover frame, assembly cage frame)

• Pay attention to align and tighten the “circular hole position” on the inside of the connector with the support bar “hole position” by a Round Head Screws.
• The assembled top frame is shown in the figure.
• Insert the assembled top frame into the 4 support bar.
• Insert and tighten the hexagonal screws from the top connector.

Installation instructions (install the top cover, and anti-vibration rubber strip)

• Cover the top dust buckle.
• Insert the left side post of the top cover into the side hole of the frame first, then pull the spring insert tip to align with the other end hole and insert it.
  • Note: If the spring insert tip does not spring back you need to press it in manually.
• Stick the anti-vibration tape to the inside edge of the top cover frame near to the door handle side.
• Finish assembly

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>