Tonghan T10-TWS Bluetooth Headset User Manual
- June 5, 2024
- Tonghan
Table of Contents
Bluetooth Headset
User Manual
How to Use:
- Make sure the charging box is with electricity. Please full charge the charging box in advance if it is in low battery state; (Pick up the earphones from the charging box and then put it back, cover the box. If the indicator light of the charging box is up, it indicates there is the electricity of charging case.)
- Open the top cover of the charging box and take out the earphones, then earphones open automatically. (One earphone indicator light will flash red and blue, and the other headphone indicator will flash blue slowly)
- Open the phone’s Bluetooth and search for “T10″, click connect to pair (the voice prompt ‘Bluetooth is connected”)
Warm Tips:
When it is used for the first time or not used for a long time, please be sure
to fully charge the charging box and earphones before use;
Please keep it in an effective environment with a barrier-free distance of 10
meters. Otherwise, there may be stuck or disconnected.
Function Operation:
On/Off Long press the multifunctional button for 3s.
Play/Pause/Answer/Hang Up: Click the left/right multifunctional button
Reject the call: long press 2s left / right multifunctional button
Volume +: double-click the left ear multifunctional button
Volume -: double-click the right ear multifunctional button
Last Song: Three-click right mufti-function button
Next Song: Three-click left mufti-function button
Siri wakes up: Long press the right earphone or left earphone for 2s
Connection Method of Single Ear: Turn off one earphone first, and the
other earphone long-press the multifunctional button for 3 seconds to turn on
the earphone till the blue and red light flashes alternately, then search
Bluetooth ‘T10’, connected.
Connection Method of Double Ear: Long press the left and right earphones
multifunctional button for3 s to turn on, till the indicator light flashes in
red and blue alternately, and the other earphone indicator light flashes in
blue slowly. Search Bluetooth to ‘T10″, click and connect.
Off Automatically: Put the earphones into the charging box, then will
automatically off and charge. You could long-press the earphone
multifunctional button to turn off the earphone.
Charging: This product has a built-in rechargeable polymer battery and is
equipped with a charging storage box with an automatic charging function.
Please make sure that the wireless headset is fully charged in first time
using.
- Connect the USB end of the charging cable to the USB port of a computer or standard charger, and the other end to the charging box Micro charging port, and charge for at least about 2 hours (the blue light flashes slowly when the charging compartment is in the charging state, after full, the blue light is on);
- Put the wireless headset in the charging slot of the charging box (if the headset is in the charging state, the red light is on; the earphone is fully charged if the blue light is on; when not in use, the indicator lights of the earphone and charging box are off).
Product Description
Model No.: T10
Bluetooth Version: V5.0+EDR
Support Agreement: HFP/HSP/A2DP/AVRCP
Operation distance: 10m
The battery of the Earphone: 45mAh
The battery of the Charging Box: 300mAh
Use Time: about 3-4h Standby Time: about 120h
Charge Time: about 2h
Package List
Charging Box xl,Earphone(L,R)xl,
USB Charge Cable xl,
Instruction manual xl,Color Box xl
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.