HENGMUONT Updated Silent Magnetic Door Stops Installation Guide

HENGMUONT Updated Silent Magnetic Door Stops

Introduction

• The image provides a visual guide for two different installation methods for a particular device or fixture.
• The left side of the image illustrates a ‘Ground Installation’.
• It shows the device mounted on a base that is positioned on the ground.
• The device appears to be secured to a vertical panel or wall, suggesting that it might be used for monitoring or as a point of access.
• The right side of the image depicts a ‘Wall Installation’.
• In this setup, the device is attached directly to a vertical wall.
• There is a visible gap or space between two sections of the device, indicating that it may have a flexible or adjustable design.
• Below the two diagrams, the text indicates that both “Perforated installation or adhesive installation are all possible”.
• This suggests that the device can be either mechanically fastened to a surface using perforations for screws or similar hardware, or it can be mounted using an adhesive method.

Specifications

adhesive

FAQ

• What are the possible installation methods for the device?
• The device can be installed using either a ground installation method, where it is mounted on a base, or a wall installation method, where it is attached directly to a wall.
• Can the device be installed without drilling holes?
• Yes, the device offers an adhesive installation option, which does not require drilling holes.
• Is the wall installation adjustable?
• The image suggests that the wall installation has a flexible or adjustable design, as indicated by the gap between two sections of the device.

Installation Methods

GROUND INSTALLATION

WALL INSTALLATION

Perforated installation or adhesive installation are all possible

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>