HENGMUONT 201DO Magnetic Stop 2 Packs Door Stoppers Instruction Manual
- June 17, 2024
- HENGMUONT
Table of Contents
Installation:
Step1: Wall/Floor side installation
Option A: Install by screws, Suit for wood, Metal surface etc.
- Unscrew the base cover counterclockwise
- Use tool mounting screws to secure the base
- Screw back the base face cover clokwise
Option B: Instsll by plastic anchor or expansion bolt. Suit for ceram tile, concrete wall, plaster wall etc.
-
Mark the base with three points. Dill holes with 6mm drill bit, and install the plastic wall anchors
-
Use tool mounting screws to secure the base
-
Screw back the base face cover clokwise
-
Drill holes with 8mm dill bit, Install staninless steel expansion bolt
-
Align the center holes to install the base
Step 2: Door side installation
- Remove the base gasket counterclockwise with a screwdriver
- Separate spring and base gasket
- Align the two points and install the gasket on the door body with screws
- Put the spring inside the base. Tighten the gasket clockwise
Read User Manual Online (PDF format)
Loading......