ecowitt GW2000 Wi-Fi Hub for Wittboy Weather Station User Manual
- June 17, 2024
- ECOWITT
Table of Contents
WFC01 User Manual
Product Overview
- Welcome to use WFC01, a product that enables intelligent irrigation. WFC01 communicates with GW2000 hub on SUB_G ISM radio band. The GW2000 hub can work with or without internet (smart mode is only available when the GW2000 hub is connected to our cloud server).
- The Smart Water Timer is equipped with a flow meter as well as a built-in temperature sensor(not provided in Beta test period), which not only functions as a water timer but also allows real-time monitoring ofwater flow and temperature. This provides you with a better understanding ofwater usage in your home or business. WFC01 supports cloud-based control, and all water usage log is stored in the cloud. Users can check their water usage anytime, manage and optimize it for more convenient control and achieve more scientific and rational water usage.
- This product can be set up in the Ecowitt APP and can be linked with Ecowitt Soil Moisture Sensors to enable automatic irrigation. It is also possible skipping off the current watering plan when predefined skip conditions are met, for example: rain is detected by Ecowitt Rain Sensors, water temperature is too low/high. The SMART mode or plan skip feature is only accessible when hub is talking to our cloud server normally. Scheduled plans are saved on hub locally and it is not affected in case of network issues, the pre-set plans can still operate normally.
- The Smart Water Timer utilizes Sub G radio frequency transmission technology, ensuring stable and reliable communication between the timer and the gateway within a range of 100 meters in an open area. Remote control is possible through the Ecowitt PP, allowing you to control your water timer anytime and anywhere. The radio status can be further monitored by the app with both device’s RSSI level.
- With a design featuring all-copper pipelines and connectors, the Smart Water Timer can withstand water pressure of up to 0.9 MPa. It is IP66 waterproof and dustproof, durable, corrosion-resistant, with a long service life.
Product Specifications
-
Size
L159 W82 H45mm -
Weight
520g. -
Material and Protection Level
Shell Material: ABS+PC.
Inlet Interface Material: Brass (CU).
Outlet Interface Material: Brass with Chrome Plating.
Waterproof / DustproofLevel: IP66. -
Power Supply and Power
Power Supply: 1.5V AA*2.
Power: 1.5mW (Average power of opening and closing once a day).
Battery Runtime: Over 6 months (Average runtime of opening and closing once a day). -
Inlet and Outlet Interface
The inlet/outlet interface is G1/2inch thread. -
Flow and Pressure
Maximum flow rate: 30L/min.
Working pressure: 0.03 ~ 0.9MPa.
Flow rate error: ±10%. -
Working Temperature and Humidity
Working Temperature: 1~ 60℃(33.8 ~ 140℉) (The equipment can still transfer data during
-40 ~ 0℃(-40 ~ 32℉) , but water freezing may cause damage to the product).
Working Humidity: 1% ~ 99%. -
Accessory List
1 x Hexagon nut; 1 x 3/4″ to 1/2″Adapter; 1 x Retaining bracket; 2 x Nylon cable ties; 3 x Screws. (not provided in Beta test period) -
Specifications
Product Name | Smart Water Timer |
---|---|
Product Model | WFCOl |
Product Size | 159x82x45(mm) |
Weight | 520g |
Shell Material | ABS+PC |
Inlet Material | Brass |
Outlet Material | Brass + Chrome Plating |
Waterproof Level | IP66 |
Power Supply | 1.5V AA Battery x 2 |
Power | 1.5mW (Average power of opening and closing once a day) |
Battery Runtime | Over 6 months (Average runtime of opening and closing once a |
day).
Interface Type| G1/2inch thread
Maximum Flow Rate| 30L/min
Working Pressure| 0.03 ~ 0.9MPa
Flow Rate Error| 10%
Working Temperature| 1 ~ 60°C(33.8 ~ 140°F) (The equipment can still transfer
data during -40 ~0°C(-40 ~ 32°F), but water freezing may cause DAMAGE to the
product)
Working Humidity| 1~99%
RF Communication Distance| 100 meters
Product Structure
Installation
-
Power on
Unscrew the 4 screws on the battery door on the back, and put in 2 AA batteries, for outdoor installation we recommend lithium batteries, due to better performance in colder conditions. The blue light on the front indicates that the device is powered on normally, and screw on the screws. Please do not use rechargeable batteries as they are lower in voltage, which is not good for reliable valve control. -
Test
Short press the button to test whether the function of the water timer button is normal. -
Pair with hub
3.1 Configuration ofGW2000
You have to finish the configuration ofGW2000 as the video instructs. Please scan the QR code to the video.https://s.ecowitt.com/43PBGA
If you’ve already got a GW2000 configured, go to 3.2.
3.2 Configuration ofWFC01
3.2.1 Long press the button for more than 5s, the LED will flash quickly and enter the network configuration mode.
3.2.2 Click as the following pictures indicate to enter the network configuration mode.3.2.3 There will be a countdown icon showing on the interface. Click Device is in pairing mode.3.2.4 Wait for about 20 seconds and the pair will be success.3.2.5 Click Confirm and you will see the operation interface of WFC01. -
Mount
Connect the water inlet and outlet pipes according to the direction of the arrow on the back of the product and fix them. The inlet port will be the port with the filter strainer insert.
Software Functions
1. Watering Methods
1.1 By duration
Set a duration. Open the timer and it will automatically be closed after
running for the set opening duration.
1.2 By quantity
Set the amount ofwater. Open the timer and it will automatically be closed
when the set quantity is reached.
1.3 Always on
Keep the timer always on until another manually off operation(press button on
faucet or APP) is carried out.
1.4 Off
Keep the timer off.
2. Operation Modes
The operation modes include Timer Button mode, Manual Watering mode, Plan mode
and Smart mode (not in Beta test period).
Each mode trigger will interrupt the others, and the operation mode generated
by the most recent trigger will take effect.
For example, if the watering is currently in progress based on a scheduled
plan and a certain condition is met to close the timer, the timer will be
immediately closed. When the next scheduled time arrives, the watering will
resume and the timer will be opened again.
2.1 Timer Button Mode
2.1.1 Short Press
Execute Manual Watering or terminate the current program.。
2.1.2 Long Press for 5s
Enter the network configuration mode.
2.1.3 Long Press for 10s
Restore factory settings.
2.2 Manual Watering Mode
2.2.1 Timer open state
Click the RUN button to turn off.
2.2.2 Timer closed state
Will execute immediately after setting the watering method on the APP.
Click the RUN button. Choose one of the three modes:
[Duration]/[volume]/[Always on].
[Cycle Mode]:
When cycle mode is turned on, a duty cycle is introduced against the current
working mode.
The duty cycle can be used to regulate more precisely for lower water rate
application.
On/off time :5 ~ 3600 seconds.
2.2.2.1 By duration![ecowitt GW2000 Wi-Fi Hub for Wittboy Weather Station
- By duration](https://manuals.plus/wp-content/uploads/2024/02/ecowitt-GW2000
-Wi-Fi-Hub-for-Wittboy-Weather-Station-By-duration.png) 2.2.2.2 By
quantity Volume Range: 1 ~ 6500
L.
Click Confirm to execute current setting.
2.2.3.3 Always On Click Confirm to execute Always On setting.
2.3 Plan mode
You can set a plan to start, and the plan can be set up to 24 start times.
2.3.1 Click plan to enter the Plan mode. 2.3.2 Click the right button to activate or deactivate a plan.
Skip function is under development, and user defined skip condition can be edited here.
(Currently this feature is not implemented, but it will be available in the next upgrade)
2.3.3 Click the left icon to enter the plan editing interface. 2.3.4 Adjust the details of the plan on the editing interface.
2.3.4.1 Add or delete a beginning time.2.3.4.2 Set the method ofwatering. By Duration or by volume.2.3.4.3 Select the Cycle Mode.
Cycle Mode
Can be set as on/off;
On/off time range:5 ~ 3600 seconds.
2.3.4.4 Set the repeat mode ofwatering. By weekly or by daily. 3. Alerts
There are 5 kinds of alerts. The details of the alerts can be inquired below.
3.1 No Water!
No water detected a while after the Water Timer has been open. Please check if the water sour ce is sufficient.
3.2 Water Leakage!
Water flow still detected after the Water Timer has been closed.
Please check the equipment immediately for leaks.
3.3 Ice Alert!
Current temperature below 5℃. Ice formation may be caused.
3.4 Overheating!
Current temperature above 60℃. Safety threat may be caused.
3.5 Communication Unstable!
Communication is unstable. Plan skip function will be disabled. Please adjust the position of the Water Timer or WiFi hub.
Note
1. Installation
The smart water timer should be installed in a dry and well-ventilated location, avoiding prolonged exposure to humid, high or low temperature, or harmful gas environments. The installation position should be as close as possible to the water source or the water pipe that needs to be controlled, and avoid excessive bending or twisting of the water pipe.
2. Usage environment
The smart water timer is suitable for both residential and commercial use. Do not install the smart water timer in areas prone to moisture or high temperatures. Additionally, it is prohibited to use chemical or corrosive substances to clean the smart water timer.
3. Maintenance
To ensure the normal operation of the smart water timer, regular maintenance is required. During daily use, please pay attention to cleaning the water timer and its surrounding area to prevent the accumulation of dust and dirt. Also, remember to replace the batteries promptly.
4. Precautions during use
When using the smart water timer, do not use it for substances other than liquids. Avoid hitting, impacting, or forcefully pulling the smart water timer during use to prevent damage to its mechanical components. Additionally, keep children and pets away from the smart water timer to prevent accidents.
Please read this user manual carefully and install and use the smart water timer correctly according to the instructions. If you have any questions, please contact our customer service team, we will be happy to assist you.
Help
Our product is continuously changing and improving, particularly online services and associated applications. To download the latest manual and additional help, please contact our technical support team: support@ecowitt.com
Warranty Information
We disclaim any responsibility for any technical error or printing error, or
the consequences thereof.
All trademarks and patents are recognized.
We provide a 1-year limited warranty on this product against manufacturing
defects, or defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only
on products purchased, and only to the original purchaser of this product. To
receive warranty service, the purchaser must contact us for problem
determination and service procedures.
This limited warranty covers only actual defects within the product itself and
does not cover the cost of installation or removal from a fixed installation,
normal set-up or adjustments, or claims based on misrepresentation by the
seller, or performance variations resulting from installation-related
circumstances.
Product Certification
TBA