MiLAGRO LED-36W-230V Allister LED Dimmable Ceiling Light Instruction Manual
- June 17, 2024
- MiLAGRO
Table of Contents
MiLAGRO LED-36W-230V Allister LED Dimmable Ceiling Light
Product Usage Instructions
-
Installation
- Follow the installation instructions provided in the user manual.
- Ensure the product is securely mounted and connected to a power source.
-
Dimming (50% Power)
To dim the light to 50% power, use the dimming controls provided with the product. Adjust the settings to achieve the desired brightness level. -
On/Off
Use the designated On/Off switch to turn the light on and off as needed. -
Increase Power
To increase the power of the light, use the power adjustment controls. Gradually increase the power until the desired brightness is achieved. -
Decrease Power
To decrease the power of the light, use the power adjustment controls. Gradually decrease the power until the desired brightness is achieved. -
Changing the Color of the Light (Light Color Selection)
The light colour temperature can be changed using a wall switch. After selecting the desired light colour, wait a few seconds for the settings to be saved.
Frequently Asked Questions (FAQ)
- Q: How do I reset the light colour temperature settings?
A: To reset the light colour temperature settings, toggle the wall switch off and on again, allowing the light to reset to its default colour temperature.
INSTALLATION INSTRUCTIONS
REMOTE CONTROL
Light colour temperature can also be changed with a wall switch. In such a case once the requested light color is obtained wait for a few seconds for the settings to be saved.
CONTACT INFORMATION
- EKO-LIGHT TEAM SP. Z 0.0. [w] www.eko-light.com
- UL. GLÓWNA 142, 42-280 [m] biuro@eko-light.com
- CZESTOCHOWA, POLAND [P] +48 666 503 666
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>