Shelly CR320V32 Blu Button 1 Bluetooth Operated Action Instruction Manual
- June 17, 2024
- Shelly
Table of Contents
USER AND SAFETY GUIDE
1 button 4 actions
Shelly BLU Button 1
CR320V32 Blu Button 1 Bluetooth Operated Action
Read before use
This document contains important technical and safety information about the
device, its safety use and installation.
CAUTION! Before beginning the installation, please read carefully and
entirely this guide and any other documents accompanying the device. Failure
to follow the installation procedures could lead to malfunction, danger to
your health and life, violation of law or refusal of legal and/or commercial
guarantee (if any). Shelly Europe Ltd. is not responsible for any loss or
damage in case of incorrect installation or improper operation of this device
due to failure of following the user and safety instructions in this guide.
Shelly® devices are delivered with factory-installed firmware. If firmware
updates are necessary to keep the devices in conformity, including security
updates, Shelly Europe Ltd. will provide the updates free of charge through
the device Embedded Web Interface
or the Shelly mobile application, where the information about the current
firmware version is available. The choice to install or not the device
firmware updates is the user’s sole responsibility. Shelly Europe Ltd. shall
not be liable for any lack of conformity of the device caused by failure of
the user to install the provided updates in a timely manner.
Product Introduction
Shelly BLU Button 1 (the Device) is a Bluetooth button, which helps you easily
activate and deactivate any device or scene with just a click. (fig.
1)
- A: Button
- B: LED indication ring
- C: Key ring bracket
- D: Buzzer
- E: Back cover
Installation Instructions
CAUTION! Keep device away from liquids and moisture. The device shouldn’t
be used in places with high humidity.
CAUTION! Do not use if the Device has been damaged!
CAUTION! Do not attempt to service or repair the Device yourself!
CAUTION!
The Device may be connected wirelessly and may control electric circuits
and appliances. Proceed with caution! Irresponsi- ble use of the Device may
lead to malfunction, danger to your life or violation of the law.
First steps
Shelly BLU Button 1 comes ready to use with the battery installed.
However, if pressing the button does not trigger a light indication or a beep,
you might need to insert a battery.
See the Replacing the battery section.
Using Shelly BLU Button 1
Pressing the button will cause the Device to start transmitting signals for
one second in compliance with the BT Home format. Learn more at
https://bthome.io.
Shelly BLU Button 1 has advanced security feature and supports encrypted mode.
Shelly BLU Button 1 supports multi-click – single, double, triple and long
press.
The LED indication will emit the same number of flashes as the button presses
and the buzzer – the corresponding number of beeps.
To pair Shelly BLU Button 1 with another Bluetooth device press and hold the
Device button for 10 sec.
The device will await connection for the next one minute. The available
Bluetooth characteristics are described in the official Shelly API
documentation at: https://shelly.link/ble
Shelly BLU Button 1 features beacon mode. If enabled, the Device will emit
beacons every 8 second, and can be discovered or used for presence detection.
This mode allows also remote activating of the Device buzzer for 30 seconds
(e.g. to find a lost Device nearby).
To restore the device configuration to factory settings, press and hold the
button for 30 seconds shortly after inserting the battery.
Initial Inclusion
If you choose to use the Device with the Shelly Smart Control mobile
application and cloud service, instructions on how to connect the Device to
the Cloud and control it through the Shelly Smart Control app can be found in
the mobile application guide.
The Shelly mobile application and Shelly Cloud service are not conditions for
the Device to function properly. This Device can be used standalone or with
various other home automation platforms and protocols.
Replacing the battery
- Open gently the Device back cover using your thumb nail, screwdriver or another flat object as shown on Fig. 2(1).
- Extract the exhausted battery using your thumb nail, screwdriver or another flat object. as shown on Fig. 2(2).
- Slide in a new battery as shown on Fig. 2(3)
CAUTION! Use only 3 V CR2032 or compatible battery! Pay attention to the battery polarity! - Replace the back cover by pressing it to the Device as shown on Fig. 2(4) until you hear a clicking sound.
Troubleshooting
In case you encounter problems with the installation or operation of Shelly BLU Button 1, please check its knowledge base page: https://shelly.link/ble
Specifications
- Dimensions: 36x36x6 mm / 1.44х1.44х0.25 in
- Weight with battery: 9 g / 0.3 oz
- Working temperature: -20°C to 40°C
- Humidity 30 % to 70 % RH
- Power supply: 1x 3 V CR2032 battery (included)
- Battery life: up to 2 years
- Multi-click support: Up to 4 possible actions
- Radio protocol: Bluetooth
- RF band: 2400 – 2483.5 MHz
- Max. RF power: 4 dBm
- Beacon function: Yes
- Encryption: AES encryption (CCM mode)
- Operational range (depending on local conditions):
– up to 30 m outdoors
– up to 10 m indoors
Declaration of conformity
Hereby, Shelly Europe Ltd. (former Allter- co Robotics EOOD) declares that the
radio equipment type Shelly BLU Button 1 in compliance with Directive
2014/53/EU, 2014/35/ EU, 2014/30/EU, 2011/65/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://shelly.link/blu-button-1_DoC
Manufacturer: Shelly Europe Ltd.
Address: 103 Cherni vrah Blvd., 1407 Sofia, Bulgaria
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud
Official website: https://www.shelly.com
Changes in the contact information data are published by the Manufacturer on
the official website. https://www.shelly.com
All rights to the trademark Shelly® and other intellectual rights associated
with this Device belong to Shelly Europe Ltd.
32/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>