NZONPET PU50 Ultrasonic Dog Training Anti Barking Device User Manual
- June 17, 2024
- NZONPET
Table of Contents
Ultrasonic Dog Training Anti
Barking Device PU50
User Manual
Make your pets heard
PU50 Ultrasonic Dog Training Anti Barking Device
Activate your 12-month warranty & get your exclusive gift register within 7
days after receiving your new product.
Please visit us now
www.nzonpet.com
Customer service
@nzonpet_official
@NZONPET
support@nzonpet.com
Note:
- The productm ay notbe effective on dogs with hearing problems.
- The productcannotbe used fordogsunder sixm onths.
- This device isnot ntended to provide protection aganstaggressive dogs.
- D ifferentdog breedsm ay react to ultrasonic sounds differently.
- Foroptm alresu lts, please use the productas a training aid, along w ith othertools/ com m ands. Be patientduring this ttainng process.
A Big Thank You
We’re thrilled that you have chosen to purchase Nzonpet Ultrasonic Anti
Barking Device.
At Nzonpet , we’re committed to providing you with product that assist you and
your pets harmonious life.
We also aim to give our customer excellent support.
Should you have any questions or feedback about your new product, simply get
in touch with our customer support team by email at
support@nzonpet.com
Enjoy your new prod uct!
Preface
Hi, Thank You for choosing and believing! 🙂
I am a user manual, let me tell you how to use PU50 ultrasonic dog training
anti barking device correctly.
PU50 ultrasonic dog barking deterrent device, which uses the principle of
ultrasound to emit soundwaves to interfere with the dog, so that it will feel
stimulated and stops the current behavior. For example, you can expel a dog
who is coming to you, or effectively train your dogs to stop unwanted
behaviors like barking, digging, clawing, biting, scratching, and getting on
furniture, easy peasy.
The anti barking device PU50 uses a frequency of 2225KHZ, which is difficult
for human hearing to perceive, but it is the most sensitive frequency for
dogs. But the sound will not negatively affect the dog’s hearing or health, it
is an effective and safe product!
Packing list
1×Dog Training and Bark Control Device
1×USB Cable
1×Wrist Strap
1×Instruction Manual
1×Clicker with Wrist Strap
Ultrasonic Bark Control
Product function
-
Usage of Ultrasonic
The side push button has three different sound wave modes, which are initiated by 22-25KHZ.
Stable and continuous sound waves
Undulating sound waves
Sound waves with irregular frequencies65
After selecting the sound wave mode, please press the launch button, it will directly send out ultrasonic waves. The animal’s hearing will become immune to a certain sound after a long time of adaptation, so multiple sound waves can prevent dogs from being immune to a certain sound wave. It can extend the effective usability of the product, so you can use different sound waves alternately in each period of time.
The working distance of PU50 ultrasonic dog bark silencer is 5 meters, which is better for indoor use.
NOTE: It’s normal if you cannot realize the sound wave changes since man cannot hear this ultrasound. -
Usage of Wammg Tone
Beep sound, you can use it before each use of ultrasound, so that some dogs can be conditioned to reflect, and they will react after hearing the BEEP sound. The Beep mode can combine with your usual dog training instructions. For example, when press the BEEP button to call your dog every time , and then you can give a reward. After multiple uses, the BEEP sound will become the sound of calling the dog. -
LED Mode
Click the LED button, this can turn on your LED light, which can be used for lighting when you walk your dog outdoors at night.
Long pressing the LED button without releasing it, it will flash quickly, which can be used as a reminder and warning to the dog. If combined with ultrasound, the PU50 ultrasonic device could be a good helper for you to stop your dog from bad behaviors in a timely manner. -
Indicator Light.
The product will keep flashing green light in standby mode. When the play button is pressed,the green light.
Battery
- When the device shows low power, please charge it as soon as possible.
- After fully charged, please remove the power supply as soon as possible to avoid prolonged charging.
- When the battery is damaged, do not repair or disassemble it.
- This product uses a 300 mAh battery.
- Charging time is about 2 hours.
- Using time is up to 12 days.
- Standby time is up to 15 days.
- Do not use adapters larger than 5V2A to charge theproduct.
- Do not immerse the product in water or extreme environments (below 0℃ or above 45 ℃).
FAQs
Question:
How to recognize that the Nzonpet anti-barking device is in working condition?
Answer:
1. There are three buttons on the device, the small button on the left is a
light button; on its right one is a beep function button.There is a bigger
button below these two the ultrasonic button.
2. Light button:There are two ways to use it; a short press or a long press.
It will emit a long bright light when short press,and a burst flashing when
long press.
The working status includes: the green indicator light is on and the bright
LED light is on.
Beep button: Press the button to turn it on, and release to turn it off.
The working status includes: the green indicator light is on with an audible
beep.
Ultrasonic button: Press the button to turn it on, and release to turn it off.
The working status includes: the green indicator light is on.
3. Green indicator light: The green indicator light is for
responding to every device’s activity if it counts.The indicator light will
not blink if any action does not count. 
4.
First, Try a test to make sure the green indicator light is ON when you press
any button, which means the device is working perfectly. If the indicator
light does not light up, please contact us at
support@nzonpet.com. The professional customer
service team will have a dedicated customer service staff to solve
it.
5. Testing the
ultrasonic working status: Make sure the green indicator light is on when you
press the ultrasonic button.
Aim the ultrasonic wave at the leaves under no wind conditions. The leaves
will be affected by the airflow generated by the ultrasonic wave and slightly
swing to prove that the ultrasonic release is normal.
In a windless condition, aim the ultrasonic wave at the candle flame. The
candle flame will be affected by the airflow generated by the ultrasonic wave
and slightly oscillate, which can also prove that the ultrasonic wave is
normally released.
Suggested operation method
Ultrasound is emitted linearly. So it is recommended to press the ultrasonic
button at the appropriate distance (≤16.4ft) and in an open environment
without obstacles. Press the ultrasonic button directly at the dog’s position,
and use hand signals and commands simultaneously. Such as ” Stop, sit down.”
Once your fur baby responds to your signal or commands, please remember to
give your pet an appropriate reward, such as snacks, petting, etc., to guide
and strengthen the dog’s memory actively. 
Notice
- Use of this product means you accept all the terms and conditions.
- This product cannot be applied to dogs with strong anti-defense and has no effect on older or hearingimpaired dogs.
- Different dogs may have different responses to sound waves. For best results, you can use this product with other training tools and instructions together.
- This product is a professional dog training device and cannot be used for other purposes. Please do not violate local laws by using this product.
- We are not responsible for any direct or indirect damages caused by use or misuse of this product, all risks in using this product are theresponsibility of the user.
- The conditioned reflex of the dog usually takes 3-10 days to form, adapt and consolidate.
During this period, please form, adapt, and consolidate. During this period, please continue to train the dog patiently. If you can’t achieve the results you expect, please contact our professional customer service support@nzonpet.com, we will get in touch with you within 24h and will do our best to assist you to get the best usage of the products.
http://www.nzonpet.com/warranty/
support@nzonpet.com
www.nzonpet.com
@nzonpet_official