HOMEDANT HOUSE House Z-Beam 48 Inch Wide Heavy Duty Garage Storage Shelving Installation Guide
- June 17, 2024
- HOMEDANT HOUSE
Table of Contents
House Z-Beam 48 Inch Wide Heavy Duty Garage Storage Shelving
The Best Organizing Solution
Enjoy organizing your space with easy, quick, and strong
www.homedant.com
Contact us global@homedant.com
COMPONENTS
PRE-ASSEMBLY TIPS
POST & COUPLER
Connecting Direction The shape of the Post hole should look like this qp
Disassembling the Post
- Fix the lowest bottom Support Beam by the foot
- Hold the upper and lower Posts.
- Shake them apart
Disassembling the Coupler
With a Support Beam and Mallet, gently hit
the connected Post Coupler to separate it.
SUPPORT BEAM
 Please
make sure the protrusions on the Support Beams are fully locked into the Post
holes.
Before
attaching the Support Beams, please confirm the position of the Post holes.
(There is a small circular hole visible every 5 post holes that can aid in
assessing height.)
Various Ways to Assemble the SUPPORT BEAM
You can assemble it in various ways depending on how you connect the Support Beams.
*
You can assemble only the Basic style when using a Z-Beams
ASSEMBLING 5-TIER SHELF
BASIC ASSEMBLY VIDEOhttp://m.site.naver.com/18GcE
It is recommended that you watch the video and instructions together for
easier assembly.
ASSEMBLY Z-BEAM
- You can assemble as many Z-Beams as you want per tier.
- You can assemble only the Basic style(in the Support Beam assembly method) when using a Z-Beams.
Z-BEAM ASSEMBLY VIDEOhttp://m.site.naver.com/18GcE
It is recommended that you watch the video and instructions together for
easier assembly.
Before assemble, please check the top and bottom of Z-Beam to not getting
confused.
Put up and combine it from the bottom to the top so that the Hooked part of
Z-Beam protrudes outward.
Let faced the Slanted direction of both the Z-Beam and Long Support-Beam each
other.
- Put the Slanted part of Z-Beam on top of Long Support Beam.
- ove the combined Z-Beam to where need to be load distribution.
ACCESSORIES
Wall Fixing Bracket
To prevent the product from falling forward, mount it on the wall with the
Wall Fixing Bracket.
(Special Gift)
Post Fixing Clip
You can fix multiple modules tightly as a single module by connecting the clip to the shelving’s Post.
(Special Gift)
Assembling J-Hook
Put the J-Hook in the Post hole then utilize it in various ways to organize more efficiently.
The Paper Holder is not a basic component. Just an example of how to utilize the J-Hook.
MULTIPURPOSE & TRANSFORMATION
Whatever you imagine, it is possible.
SAFETY PRECAUTIONS
ASSEMBLY
– After opening the package, please check whether there are no problems with
the components.
– Assemble and use the product on a flat surface and in a safe place.
– Do not install more than four posts when extending the height.
– When using an iron hammer, lay down a cotton towel to prevent damage to the
product.
USE
– Check whether the product has been well assembled before use.
– Donot climb or hang on the product.
– Be careful of the protrusion or edges that may cause injury.
– Itis possible to turn into diverse modules Nevertheless please refrain from
any unstable structural changes.(Unbalanced assembly, removing parts
arbitrarily, etc.)
– Donotload the product be vibrated.
– If there are dirty substances or liquids on it, wipe it with a dry towel and
dry it completely.
STORAGE
– Do not install the product in places with high temperatures, or near
chemicals, fire sources.
– Keep the product in a dry and well-ventilated place.
– Please be careful that if the product is left in a humid place for a long
time, it may bend.
RECOMMENDATIONS
Put heavy items on the bottom
Distribute and balance items when organizing
We do not recommend setting the bottom board too high as that might disrupt
the stability of the product
Need 2 people to move it When assembling, protect the ground and use
gloves
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>