YETI SB140 Review Work Hard Owner’s Manual

YETI SB140 Review Work Hard

Product Information

• Specifications
  • Model: YETI SB140/LR 27.5
  • Travel: 140mm
  • Frame Material: High Modulus Carbon Fiber
  • Suspension System: Switch Infinity Technology
  • Drivetrain Compatibility: 1x only
  • Head Tube: Integrated (41mm/52mm)
  • Suspension: Fox Racing Shox (DPS shock for SB140, Float X shock for SB140LR)
  • Cable Routing: Internal
  • Boost Dropout: 12 x 148mm

Product Usage Instructions

• Frame Assembly
  • Follow the provided assembly instructions carefully to ensure the proper setup of the frame components.
• Seat Post Set-Up
  • Adjust the seat post according to your preferred height and secure it properly to ensure a comfortable riding position.
• Switch Infinity Bearing Assembly
  • Regularly inspect and maintain the Switch Infinity Bearing Assembly as per the maintenance guidelines provided in the manual.
• Maintenance
  • Refer to the maintenance section of the manual for detailed instructions on how to care for your YETI SB140/LR to ensure optimal performance and longevity.
• Frequently Asked Questions (FAQ)
  • Q: Can I use a front derailleur on the SB140/LR frame?
  • A: No, the SB140/LR is optimized for 1x drivetrains only and does not have a front derailleur mount.
  • Q: How do I adjust the suspension on the SB140?
  • A: The SB140 uses a Fox Racing Shox shock which can be adjusted using the provided settings based on your riding preferences.

CONGRATULATIONS ON YOUR PURCHASE OF A NEW YETI

• We are confident your new bicycle will exceed your expectations for value, performance, and ride quality. Each frameset and component has been custom-specified and designed to enhance your riding experience. Whether you are a beginner cyclist or a seasoned pro, your Yeti bicycle will provide endless hours of two-wheeled fun.
• This model-specific manual is designed to be used in conjunction with the general Yeti Owner’s Manual and the manuals supplied by the suspension manufacturers. If you did not receive the Yeti Owner’s Manual or the manual provided by the suspension manufacturer, download the materials off the Internet, or contact your local dealer. Bicycling can be a hazardous activity even under the best of circumstances. Proper maintenance of your bicycle is your responsibility and when done properly helps reduce the risk of injury and damage to your bicycle.
• The SB140 is made specifically for off-road use only.
• This manual outlines basic setup and maintenance recommendations for your new Yeti.
• It is impossible to anticipate every situation or condition that may occur during the assembly, setup, and maintenance of your bicycle, Yeti recommends that all service and repairs be performed by your local authorized Yeti Dealer.
• This manual contains many “Warnings” and “Cautions” concerning the consequences of failure to maintain or inspect your bicycle. The word “Warning” indicates a potentially hazardous situation in which, if not avoided, could result in serious injury or death.
• The word “Caution” indicates a potentially hazardous situation which, if not avoided may result in minor injuries or damage to your bicycle or a component of your bicycle. Be sure to read and understand all of the Warnings and Cautions listed in the manual.
• WARNING: Make sure you review and understand the warnings, instructions, and content of this manual and accompanying manuals for your bicycle.
• WARNING: Technological advances have made bicycles and bicycle components more complex and the pace of innovation is increasing. It is impossible for this manual or the accompanying manuals to provide all the information required to properly repair and/or maintain your bicycle. To help minimize the chances of an injury, you must have work performed by an authorized Yeti retailer.

FEATURES

THE LOWDOWN ON THE SB140 AND ITS FEATURES

FRAME FEATURES

1. SWITCH INFINITY TECHNOLOGY PATENTED SUSPENSION SYSTEM
   • The SB140/LR delivers 140 MM of travel with our patented Switch Infinity Technology. Efficient pedalling performance while still smooth and continuous when the going gets rough.
2. HIGH MODULUS CARBON FIBER MAIN FRAME AND SWING ARM
   • High-modulus carbon provides a stiff, strong and lightweight chassis.
3. COLLET AXLE SYSTEM ON PIVOTS REDUCES BEARING WEAR
   • Collected pivot axles help create a stiff interface between the front and rear triangles of the frame. Custom Enduro Max sealed bearings keep things moving freely at the pivots.
4. OPTIMIZED FOR 1X DRIVETRAINS ONLY
   • The SB140/LR does away with the front derailleur mount, making it a 1x drive-specific frame. This increases stiffness in the frame.
5. ISCG 05 CHAINGUIDE MOUNTS
   • ISCG 05 chain guide mounts are included on the SB140/LR in case you want to go for some extra drivetrain security in the rowdy sections.
6. INTEGRATED HEAD TUBE (41MM/52MM)
   • Using our integrated head tube on the SB140/LR allows for a larger head tube with more area, increased stiffness, and lower overall ride height without compromising any performance.
7. SUSPENSION BY FOX
   • The SB140 uses a 210mm x 55mm Float DPS shock by Fox Racing Shox.
   • The SB140LR uses a 210mm x 55mm Float X shock by Fox Racing Shox.
8. CUSTOM DEBRIS AND CHAIN SLAP GUARDS
   • Custom guards on the seat stay, chain stay and down tube keep things quiet while riding and protect the frame.
9. INTERNAL CABLE ROUTING
   • The SB140/LR features internal routing for all cables, making the bike quiet and clean looking as well as reducing cable rub on the paint.
10. INTEGRATED AXLE AND DERAILLEUR HANGER SYSTEM
    • Dedicated 12 x 148 Boost dropouts and integrated hanger with axle threads for strength, stiffness, ease of hanger and wheel installation.

GEOMETRY SB140 LR 27.5

495
B| EFF. TOP TUBE LENGTH| 539| 568| 600| 623| 651
C| HEAD TUBE ANGLE˚| 64.6| 64.6| 64.6| 64.6| 64.7
D| ACTUAL SEAT TUBE ANGLE˚| 73.1| 73.1| 73.1| 73.1| 73.2
E| CHAINSTAY LENGTH| 433| 433| 433| 433| 433
F| WHEELBASE| 1148| 1179| 1211| 1236| 1266
G| ESTIMATED BB HEIGHT| 343| 343| 343| 343| 343
H| STANDOVER| 700| 711| 713| 716| 718
I| HEAD TUBE LENGTH| 96| 110| 115| 126| 137
J| FORK (AXLE TO CROWN)| 558| 558| 558| 558| 558
K| FORK (OFFSET)| 37| 37| 37| 37| 37
L| STACK| 585| 598| 603| 613| 623
M| REACH| 401| 426| 456| 476| 501
N| FRONT CENTER| 715| 738| 778| 803| 833
O| VERTICAL FORK TRAVEL| 145| 145| 145| 145| 145

FIT

• X-SMALL 4’11” (150 CM) – 5’3” (160 CM)
• SMALL 5’1” (155 CM) – 5’7” (170 CM)
• MEDIUM 5’5″ (165 CM) – 5’11” (180 CM)
• LARGE 5’10” (178 CM) – 6’3″ (191 CM)
• X-LARGE 6’1” (185 CM) – 6’7” (200 CM)

GEOMETRY SB140 27.5

495
B| EFF. TOP TUBE LENGTH| 538| 567| 598| 621| 649
C| HEAD TUBE ANGLE˚| 65.1| 65.1| 65.1| 65.1| 65.1
D| ACTUAL SEAT TUBE ANGLE˚| 73.6| 73.6| 73.6| 73.6| 73.6
E| CHAINSTAY LENGTH| 433| 433| 433| 433| 433
F| WHEELBASE| 1144| 1175| 1207| 1232| 1261
G| ESTIMATED BB HEIGHT| 339| 339| 340| 340| 340
H| STANDOVER| 702| 707| 710| 712| 714
I| HEAD TUBE LENGTH| 96| 110| 115| 126| 137
J| FORK (AXLE TO CROWN)| 548| 548| 548| 548| 548
K| FORK (OFFSET)| 37| 37| 37| 37| 37
L| STACK| 582| 595| 599| 609| 619
M| REACH| 406| 431| 461| 481| 506
N| FRONT CENTER| 711| 742| 774| 799| 828
O| VERTICAL FORK TRAVEL| 136| 136| 136| 136| 136

FIT

• X-SMALL 4’11” (150 CM) – 5’3” (160 CM)
• SMALL 5’1” (155 CM) – 5’7” (170 CM)
• MEDIUM 5’5″ (165 CM) – 5’11” (180 CM)
• LARGE 5’10” (178 CM) – 6’3″ (191 CM)
• X-LARGE 6’1” (185 CM) – 6’7” (200 CM)

FRAME STANDARDS

MAINTENANCE OVERVIEW

KEEP YOUR YETI FRESH AND CLEAN

• Following these guidelines will help maintain the performance of your bicycle and prevent more serious problems from arising.
• It is important to remember that service intervals can vary depending on climate, trail conditions and riding frequency.
• Servicing your bike requires special knowledge and tools.
• If you are unsure about working on your bicycle, contact your authorized Yeti Dealer for more information on general bicycle maintenance.

TORQUE

• Yeti strongly recommends using a torque wrench when assembling your frame.
• Torque specifications for individual parts on the SB140 are listed below, as well as in the step-by-step assembly instructions later in the manual.
• For general bicycle maintenance please consult the torque specifications of the component you are adjusting.

SCHEDULE

Clean and lube chain| BEFORE
EACH RIDE| MONTHLY| 3 MONTHS| ANNUALLY
---|---|---|---|---
Check tyre pressure| •|  |  |
Clean the bike of mud and debris| •|  |  |
Check brake function| •|  |  |
Ensure all cable ends are covered with crimped cable end caps| •|  |  |
Check rims for deformations or cracks| •|  |  |
Check for loose bolts and tighten, if necessary|  | •|  |
Check the headset and tighten/loosen, if necessary|  | •|  |
Check/replace brake pads|  |  | •|
Check tyres for wear|  |  | •|
Check spoke tension, and retention, if necessary|  |  | •|
Check the chain for wear, replace if necessary|  |  | •|
Complete tune-up performed by an authorized Yeti Dealer|  |  |  | •

KEY TORQUE SPECS

FRAME ASSEMBLY

YETI TIPS

• Make sure your tools are in good condition. A worn Allen key can round the hex on a bolt not allowing for proper torque.
• Torque settings are listed throughout the instructions. It is important to prep all bolt threads. The instructions denote whether to use a Loctite compound or grease.
• WARNING: Service on Yeti bicycles requires special knowledge and tools. Yeti Cycles recommends that all services and repairs be performed by an authorized Yeti Dealer.

TOOLS NEEDED

• 3mm Allen key
• 4mm Allen key
• 5mm Allen key
• 6mm Allen key
• 10mm Allen key
• Guide pin tool (or two)
• Cassette tool
• Torque wrench
• Grease
• Blue 243 Loctite

INSTALLATION

1. All the parts you’ll need to get your SB140/LR frame assembled. Please refer to the exploded view later in this manual for more information.
2. Press the Shock Eyelet Spacer into the rear shock eyelet using an arbour press or vice.
3. Apply a light coat of grease to the threads of the Reat Triangle at the Seat Stay Pivots. Install 2x Bearing Lockring (200020311) with a cassette tool. *Torque to 20 Nm
4. Slide 4x Washer (300030214) over 4x M6 Cap Screw (300030057) prepped with Blue 243 Loctite. Insert the 4x Cap Screws into the frame and place a black Infinity Link washer on each bolt. Orient the washers such that the flat surfaces are facing the window in the frame where the Switch Infinity is mounted.
5. Install the Switch Infinity Link into the frame by rocking it into place over the bolts and black Switch Washers. The grease zerks should face the non-drive side. Tighten the 4x bolts by hand, then torque in a cross pattern. Torque to 12 Nm.
6. Grease shaft of the Link Pivot Female Bolt (200020328). Place the Link onto the Front Triangle as shown and secure it with the link Pivot Female Bolt.
7. Install Male Link Pivot Bolt (300030293) prepped with Blue 243 Loctite into Link Pivot Female Bolt (200020328) as shown. *Torque to 15 Nm
8. Apply a light coat of grease to the inner surfaces of 2x Extender Bearing Races (300040505). Place one each into the Upper and Lower Shock Extenders (200020322 and 200020323). Place the Upper and Lower Extenders together so that the bearings touch in the middle. Orient the Upper threaded extender toward the top and slide into Link (200020321). Secure with a Guide Pin.
9. Slide a 41mm Titanium Female bolt with a Washer (300030069) through the Link/ Extender Assembly. Secure with a Ti Male Bolt (300030151) & Washer (300030062) prepped with Blue 243 Loctite. *Torque to 10 Nm
10. Apply a light coat of grease to the Rear Triangle in the Main Pivot bores and grease shaft of Main Pivot belt axle (300040485) and prep threads with Blue 243 Loctite. Slide the Rear Triangle over the Switch Infinity Link and install the Main Pivot belt axle (300040485) through the assembly. Install the Collet Nut (3000303285) and tighten the Axle until any play is removed. *Torque to roughly 12 Nm
11. Grease threads and a wedge of Large Collet Wedge Bolt (300040454). Install into the Main Pivot Axle. *Torque to 14 Nm
12. Grease shaft of 2x Seatstay Pivot Female Bolt (200020326). Install one Seatstay Pivot Female Bolt (200020326) through the Rear Triangle and into the link.
13. Rotate the Swingarm Forward and move the Upper and Lower Shock Extenders out of the way. Install one Keyed Bolt (200020327) prepped with Blue 243 Loctite from the inside of the link, threading the Female Bolt onto it. Draw the Keyed Bolt into assembly and make sure its keyness into the keyway on the Link bore. Repeat the process on the opposite side. *Torque to 16 Nm
14. Open the Upper and Lower Shock Extenders and position the Shock into the frame, allowing it to sit between the two Extender jaws. Secure the front eyelet with a Guide Pin.
15. Grease the shaft of the short Collet Axle (300030296) and prep threads with Blue 243 Loctite. Install from the Lower Extender through the Shock and threading into the Upper Extender. *Torque to 13 Nm
16. Grease threads and a wedge of small Collet Wedge Bolt (300040486) and install into short Collet Axle. Torque to 8 Nm
17. Install a 45mm Titanium Female Bolt (300030297) with a Washer (300030069) through the front shock mount.
18. Secure front shock mount with Titanium Male Bolt (300030151) prepped with Blue 243 Loctite and Washer (300030062). Torque to 10 Nm
19. Install 2x Washer (300030148) onto 2x H20 Bolt (300030010) and grease threads. Install into a front triangle and secure hand tight. Torque to roughly 4 Nm
20. Install Cable Port Cover (300040454) onto the frame with 2x Flat Head Bolt (300030299). Torque to 3-4 Nm
21. Grease the outer surface of Derailleur Hanger (300060073). Install into the Rear Triangle and secure with a hanger Cap (300060075).
    • Note: The Hanger is reverse-threaded. Torque to 10 Nm

BEARING ASSEMBLY

SWITCH INFINITY V2 BEARING ASSEMBLY

BEARING REMOVAL

1. Remove dust caps on the outside of the bearings.
2. Remove the non-drive side bearing.
3. Remove the axle sleeve from the drive side bearing.
4. Remove the drive side bearing.

BEARING INSTALL

1. Press the drive side bearing into the Switch Infinity body.
2. Slide axle sleeve into drive side bearing.
3. Press the non-drive side bearing onto the sleeve.
4. Replace bearing caps.

SWITCH INFINITY V1 BEARING ASSEMBLY

BEARING REMOVAL

1. Remove the drive side bearing and axle sleeve
2. Remove the non-drive side bearing

BEARING INSTALL

1. Press the non-drive side bearing into the switch infinity housing (ensure the extended race is facing outward from the switch infinity body).
2. Place axle sleeve in body and press drive side bearing into the housing

SEAT POST-SET-UP

STANDARD ROUTING SET-UP

1. With a 3mm Allen key, remove the lower cable port access cover near the bottom bracket.
2. Install your seatpost housing into the head tube port, pushing until it exits near the lower cable port access hole.
3. Use your finger to help push the housing around the bend in the frame up into the seat tube.
4. While pushing the housing into the head tube port, continue pushing the cable up the seat tube through the access port until the housing exits the seat tube.

PARK TOOL SETUP

1. Remove the lower cable port access cover with a 3mm Allen key.
2. Drop a Park Tool Router tool down the seat tube until it exits the access port.
3. Push your seatpost housing into the frame from the headtube port until it exits near the access port.
4. Outside of the access port, connect the Park router tool to the housing.
5. Pull the router tool back through the frame until the housing exits the seat tube.

HYDRAULIC SETUP

1. Route a section of shifter housing through the frame using the steps described in Standard Setups. Connect the double-barb to the shifter housing and the seatpost housing at the seat tube.
   • BRAKE: Push the brake line into the frame starting at the rear triangle, feeding it forward to the ports into the front triangle and out the head tube.
2. Push your seatpost housing into the frame from the headtube port until it exits near the access port.
   • SHIFTER: Outside of the access port, connect the Park router tool to the housing.

SWITCH INFINITY SERVICE

1. With a 5mm Allen wrench, remove the main pivot Collet Wedge Bolt.
2. With a 10mm Allen wrench, remove the Main Pivot Collet Axle. The Collet Nut on the drive side can remain in the frame.
3. Rotate your swing arm upwards to access both grease zerks and expose the whole Switch Infinity link. With a clean rag and mild detergent, clean any mud, dust, or debris off the Switch Infinity Link.
4. Using a needle-type grease gun, push new grease into the two Switch Infinity grease ports until you see grease extruding from the shaft seals.
5. Wipe off any excess grease that was pushed out of the seals.
6. Lower the swingarm and re-install your Main Pivot Collet Bolt prepped with Blue 243 Lcotite. Torque: 11 Nm
7. Install the Main Pivot Collet Wedge and torque to 14 Nm.

FOX TRANSFER POST INSERTION GUIDE

MEASURE FROM THE TOP OF THE SEAT TUBE TO THE BOTTOM OF THE DROPPER POST AS SHOWN BELOW (MEASUREMENTS IN MM)

To check out our shock setup guide, paste https://shocksetup.yeticycles.com/bikes into your browser.

EXPLODED VIEW

PARTS LIST

EXPLODED VIEW PARTS LIST

ITEM #     PART #          DESCRIPTION| TORQUE
(NM)| QTY
---|---|---
 |  |  |  |  |  | 4.14| 300040486| COLLET WEDGE SUB-ASSEMBLY 10 MM| 1
1|  | SB140 FRONT TRIANGLE ASSEMBLY|  | 1|  | 4.14.1| 300030284| COLLET BOLT M5 X .8| 1
1.1|  | SB140 FRONT TRIANGLE ASSEMBLY|  | 1|  | 4.14.2| 300030283| COLLET WEDGE 10MM| 1
1.2| 300070006| ICE AXE HEAD BADGE|  | 1|  | 4.14.3| 300040482| SPIRAL RETAINING RING 0.25 X 0.22 INCHES| 1
1.3| 400100186| DT PROTECTOR|  | 1|  | 4.15| 300030297| BOLT MASTER, TI FEMALE, 8 X 45.0| 1
 |  |  |  |  |  | 4.16| 300030298| BOLT MASTER, TI FEMALE, 8 X 41.0| 1
2|  | SB140 SWINGARM ASSEMBLY|  | 1|  | 4.17| 300030069| WASHER 8.5 X 12.5 X 0.5 MM| 2
2.1|  | SB140 SWINGARM|  | 1|  | 4.18| 300030151| BOLT, TI MALE, M6 X 12.0 MM| 2
2.2| 400100198| SB140 PROTECTOR CS/SS|  | 1|  | 4.19| 300030062| WASHER 6.5 X 12.5 X0.5 MM| 2
2.3| 400100199| SB140 PROTECTOR CS – LOWER|  | 1|  | 4.20| 200020322| ASSEMBLY SHOCK EXTENDER TOP (60MM)| 1
 |  |  |  |  |  | 4.20.1| 300040502| SHOCK EXTENDER TOP (60)| 1
3|  | SB140 SHOCK SUB ASSEMBLY|  | 1|  | 4.20.2| 300020032| BEARING, 398 MAX DBL, 8X19X10/11| 1
 |  |  |  |  |  | 4.21| 200020323| ASSEMBLY SHOCK EXTENDER, BOTTOM (60MM)| 1
4|  | SB140 SMALL PARTS ASSEMBLY|  | 1|  | 4.21.1| 300040503| SHOCK EXTENDER BOTTOM (60MM)| 1
4.1|  | SB140 LINK SUB-ASSEMBLY|  | 1|  | 4.21.2| 300020032| BEARING, 398 MAX DBL, 8X19X10/11| 1
4.1.1| 300040507| SB140 LINK|  | 1|  | 4.22| 300040505| SHOCK EXTENDER BEARING EXTENSION| 2
4.1.2| 300020052| BEARING 6902-2RS EXTENDED, 15 X 28 X 7/10|  | 2|  | 4.23| 300060078| ASSEMBLY YETI SEAT CLAMP – BOLT ON 31.6| 1
4.2| 200020326| BOLT, SS PIVOT, FEMALE|  | 2|  | 4.23.1|  | COLLAR, BOLT-ON, YETI SEAT CLAMP, 31.6| 1
4.3| 200020327| LINK PIVOT HARDWARE, KEYED, LONG|  | 2|  | 4.23.2|  | BARREL NUT, YETI SEAT CLAMP, BOLT-ON| 1
4.4| 200020311| LOCKRING, 6902-2RS|  | 2|  | 4.23.3| 300030010| BOLT, M5 X 0.8, 16L| 1
4.5| 300030293| LINK, PIVOT HARDWARE, MALE, 15MM|  | 1|  | 4.24| 300040504| CABLE PORT COVER| 1
4.6| 200020328| STUD, LINK BEARING, FEMALE, 15MM|  | 1|  | 4.25| 300030299| BOLT, FLAT HEAD, M5 X 0.8 X 16| 2
4.7| 200020201| SWITCH INFINITY G1 MECHANISM|  | 1|  | 4.26| 300020052| BEARING 6902-2RS EXTENDED, 15 X 28 X 7/10| 2
4.8| 300030057| BOLT, M6 X 1.0, 20L|  | 4|  | 4.27| 300030010| BOLT, M5 X 0.8. 16L| 2
4.9| 300030214| WASHER 6.3X10X1 MM|  | 4|  | 4.28| 300030148| WASHER 5.1 X 8.9 X 1.0 MM| 1
4.10| 300040485| COLLET AXLE 15MM|  | 1|  | 4.29| 300030300| SHOCK EYELET SPACER| 1
4.11| 300040454| COLLET WEDGE SUB-ASSEMBLY 15MM|  | 1|  | 4.30| 300060073| 12 X 148 HANGER KIT G3| 1
4.11.1| 300030268| COLLET BOLT M8 X 1.25|  | 1|  |  |  |  |
4.11.2| 300030267| COLLET WEDGE 15MM|  | 1|  |  |  |  |
4.11.3| 300040450| SPIRAL RETAINING RING 0.37 X 0.349 INCHES|  | 1|  |  |  | |
4.12| 300030285| COLLET NUT M15 X 1.5|  | 1|  |  |  |  |
4.13| 300030296| COLLET AXLE 30.5 X 10.5 M10 X 1.0|  | 1|  |  |  |  |

REBUILD KITS

PART #| DESCRIPTION| QTY|
---|---|---|---
200020333| SB140 MASTER REBUILD KIT|  |  | 200020334| SB140 HARDWARE KIT|
200020311| LOCKRING, SS PIVOT| 2|  | 200020311| LOCKRING, SS PIVOT| 2
200020322| SHOCK EXTENDER 60MM TOP W/BEARING| 1|  | 200020322| SHOCK EXTENDER 60MM TOP W/BEARING| 1
200020323| SHOCK EXTENDER 60MM BOTTOM W/BEARING| 1|  | 200020323| SHOCK EXTENDER 60MM BOTTOM W/BEARING| 1
200020326| BOLT, SS PIVOT, FEMALE| 2|  | 200020326| BOLT, SS PIVOT, FEMALE| 2
200020327| LINK PIVOT HARDWARE, KEYED, LONG| 2|  | 200020327| LINK PIVOT HARDWARE, KEYED, LONG| 2
200020328| STUD, LINK BEARING, FEMALE 15MM, 48.5L| 1|  | 200020328| STUD, LINK BEARING, FEMALE 15MM, 48.5L| 1
300020045| BEARING F6902 2RS 28X15X 7 OUT| 2|  | 300030057| BOLT CAP M6X1X20| 4
300020052| BEARING 6902 LLU MAX-E| 4|  | 300030062| WASHER SS 6.5MM ID 12.5MM| 2
300030057| BOLT CAP M6X1X20| 4|  | 300030069| WASHER SS 8.5MM ID 12.5MM| 2
300030062| WASHER SS 6.5MM ID 12.5MM| 2|  | 300030151| BOLT-TI-MALE M6X12MM| 2
300030069| WASHER SS 8.5MM ID 12.5MM| 2|  | 300030214| WASHER 10 X 6.2 X 1| 4
300030151| BOLT-TI-MALE M6X12MM| 2|  | 300030285| COLLET AXLE NUT M15X1.5X12| 1
300030214| WASHER 10 X 6.2 X 1| 4|  | 300030293| AXLE, MALE, 15MM X 16MM, M10X1.0| 1
300030285| COLLET AXLE NUT M15X1.5X12| 1|  | 300030296| COLLET AXLE 30.5X10.5 M10X1.0| 1
300030293| AXLE, MALE, 15MM X 16MM, M10X1.0| 1|  | 300030297| BOLT MASTER, TI FEMALE, 8 X 45.0| 1
300030296| COLLET AXLE 30.5X10.5 M10X1.0| 1|  | 300030298| BOLT MASTER, TI FEMALE, 8 X 41.0| 1
300030297| BOLT MASTER, TI FEMALE, 8 X 45.0| 1|  | 300030299| BOLT, FLAT HEAD, M5 X 0.8 X 16| 2
300030298| BOLT MASTER, TI FEMALE, 8 X 41.0| 1|  | 300030300| SHOCK EYELET SPACER| 1
300030299| BOLT, FLAT HEAD, M5 X 0.8 X 16| 2|  | 300040454| COLLET-WEDGE ASSEMBLY GEN2| 1
300030300| SHOCK EYELET SPACER| 1|  | 300040485| AXLE COLLET 15X52.5SX13T| 1
300040454| COLLET-WEDGE ASSEMBLY GEN2| 1|  | 300040486| COLLET-WEDGE ASSEMBLY – M10| 1
300040485| AXLE COLLET 15X52.5SX13T| 1|  | 300040504| CABLE PORT COVER| 1
300040486| COLLET-WEDGE ASSEMBLY – M10| 1|  | 300040505| SHOCK EXTENDER BEARING EXTENSION| 2
300040504| CABLE PORT COVER| 1|  |  |  |
300040505| SHOCK EXTENDER BEARING EXTENSION| 2|  | 200020335| SB140 BEARING REBUILD KIT|
 |  |  |  | 300020032| BEARING 398 2RS MAX DBL ROW| 2
 |  |  |  | 300020045| BEARING F6902 2RS 28X15X – OUT| 2
 |  |  |  | 300020052| BEARING 6902 LLU MA-E| 4
PART #| DESCRIPTION| QTY
---|---|---
200020039| SB140 PORT COVER KIT|
300030299| BOLT, FLAT HEAD, M5 X .08 X 16| 2
300040504| CABLE PORT COVER| 1
400100196| SB140 GEN1 PROTECTOR KIT|
400100186| UNIVERSAL DT PROTECTOR| 1
400100198| SB140 CS/SS PROTECTOR| 1
400100199| SB140 CS LOWER PROTECTOR| 1

FREQUENTLY ASKED QUESTIONS (1 OF 2)

• WHAT IS THE DIFFERENCE BETWEEN THE TURQ AND CARBON SERIES SB140?
  • TURQ Series bikes are manufactured with the highest quality and best-performing carbon fiber available and offer the perfect balance of stiffness, durability, and compliance. The result is a bike that feels smooth, solid and aggressive. Carbon series bikes use a modified carbon fibre layup of our TURQ Series bikes. By using different materials and tweaking the fibre layup, we can make a more aggressively priced carbon high-performance mountain bike while maintaining the strength and stiffness of its higher-end sibling. The carbon series SB140 weighs a bit more, about 190g for a frame.
• WHAT IS SWITCH INFINITY TECHNOLOGY AND HOW DOES IT WORK?
  • Switch Infinity utilizes a patented translating pivot that automatically switches direction as the bike moves through its travel. This provides excellent anti-squat characteristics for superior pedalling performance and ideal suspension characteristics as it gets deeper into the travel. Inside are a pair of greased bushings that slide up and down on two Kashima-coated rails – it’s not an extra shock that needs to be filled with air. Just keep it greased and wiped clean per our maintenance recommendations below.
• DOES THE SWITCH INFINITY SYSTEM REQUIRE MAINTENANCE?
  • The fully sealed Switch Infinity mechanism has external grease ports to lube the bushings and seals. Yeti and development partner Fox Racing Shox recommend a lubrication interval of 40 hrs of riding. It is important not to over-lube the system and adhere to the recommended interval. It also doesn’t hurt to wipe off any excess dust and dirt that may accumulate throughout the week. Any maintenance supplies you need can be found on our website or at your local dealer. For detailed maintenance information, please visit https://www.ridefox.com/fox17/help.php?m=bike&id=465
• CAN I REPLACE OR MODIFY ANY YETI FRAME PARTS ON MY SB140?
  • All replacement frame parts for your SB140 can be found through your local dealer or on our website. Only genuine Yeti parts should be used when replacing any parts on your frame. We know there are a lot of aftermarket products out there that seem legit but we cannot qualify and ensure all of these products are safe to use on our frames. If it is found that any frame part has been modified or replaced all warranties will be voided and all liability will be assumed by the customer.
• CAN I CHANGE OR UPGRADE THE SPEC COMPONENTS ON MY SB140?
  • There are many options in aftermarket parts to upgrade or personalize your bike. Some parts are standardized, especially from the big brands like Fox, Shimano, SRAM etc. You should always confirm with a professional mechanic that your parts are the correct standard and correctly and securely mounted to your bike without any interference or play. Pay special attention to all the bike standards and check the fit before use.
• CAN I USE AN ANGLESET ON THE SB140?
  • The SB140 was designed with an integrated headset which has the headset cups molded into the frame so you can easily drop the bearings into the cups. There are some aftermarket anglesets available for this style of headset however the frame was not tested for the use of these and therefore should not be used. Yeti’s warranty will be voided if it is found an angle set was installed on the frame and all liability will be assumed by the customer. See “What travel fork is the SB140 designed to use” for more information.
• WHAT TRAVEL FORK IS THE SB140 DESIGNED TO USE?
  • The SB140 is designed to run a 150 mm or 160mm travel fork. We tested this frame to 20mm over the spec fork. So if you’re feeling the need to beef up the fork you can run up to a 180mm fork with no problem. Bottom line – max axle to crown measurement of 577mm. Increasing your fork travel will slacken the head angle and seat tube angle and raise the bottom bracket. Running a shorter fork is fine too if that suits you. Shortening the fork will steepen the head angle and seat tube angle and lower the bottom bracket For more geometry information, check out the geometry section.
• HOW BIG OF A TYRE CAN I FIT ON THE SB140?
  • The short answer is the SB140 can accept up to a 2.6” tyre. There is great tyre clearance on the SB140 but tyre sizes vary widely by manufacturers, so it is hard to give a number that works for all brands.
• CAN I FIT A WATER BOTTLE INSIDE THE FRONT TRIANGLE?
  • Yes, we designed the SB140 to accommodate a standard-sized water bottle inside the front triangle with a piggy-back shock. We recommend using a side-entry cage for the easiest access.
• WHAT CRANKS AND BOTTOM BRACKET CAN I USE ON THE SB140?
  • The SB140 bottom-bracket standard is PF92 [92mm] and only wide “q” factor cranks are compatible. It is readily compatible with Shimano, SRAM, and RaceFace cranks, but a fit check is required for other brands.
• WHAT REAR WHEEL AXLE FITS ON MY SB140?
  • The SB140 is designed to work exclusively with a Yeti or Shimano 148mm X 12mm E-Thru rear axle. The frame’s rear triangle has been optimized for stiffness and weight with these specific axles.
• WHAT TYPE OF HEADSET DOES THE SB140 USE?
  • The SB140 uses an Integrated 41mm/52mm tapered headset. This system allows for the headset bearings to be contained inside the head tube for an overall lower ride height, more simplified installation, and increased stiffness.

FREQUENTLY ASKED QUESTIONS (2 OF 2)

• HOW BIG OF A ROTOR WILL FIT ON THE FRAME?
  • The SB140 has a direct mount rear brake tab and can run a 180mm rotor without the need for a brake adaptor. With the use of a brake adaptor, the frame can accept up to a 203mm rotor.
• CAN I RUN A STEALTH SEATPOST DROPPER ON THE SB140?
  • Yes. The SB140 has routing options for stealth only.
• WHAT CHAINLINE WAS THE SB140 DESIGNED AROUND?
  • The SB140 was designed around a Boost chainline. Depending on the crank and chain ring configuration you can run other chainlines but you will have to do a clearance check first.
• WHAT IS THE MAX SIZE SINGLE-CHAINRING THAT FITS ON THE SB140?
  • Without getting too technical, the max chainring size depends on the crank chain line and the chainring shape. Shimano / SRAM Boost cranks: 34t round / 32t oval RaceFace / 52mm chain line Cranks: 34t round / 32t oval
• Minimum Chainring Size: 28t round / 30t oval Confused?
  • Ask your local dealer or call us at 303.278.6909.
• DOES THE SB140 HAVE ISCG MOUNTS?
  • Yes. The SB140 has integrated ISCG ’05 mounts. It is designed to work best with low-profile modern guides; depending on the brand, some older models with larger upper guides may not fit. We always recommend performing a fit-check with a specific chain guide to confirm compatibility.
• WHAT TYPE OF SHOCK DOES THE SB140 USE?
  • The SB140 uses a 210 x 55mm shock. Depending on the shock model, it can be locked out but we recommend running it fully open for the best compliance and traction.
• WHAT TYPE OF SHOCK HARDWARE DOES THE SB140 USE?
  • The SB140 uses M8x36mm hardware on the reservoir side and a custom Yeti reducer on the shaft side. If you swap between shocks, the reducer can be found here, https://www.yeticycles.com/gear/parts/shock-eyelet-spacer.
• CAN I PUT A COIL SHOCK ON MY SB140?
  • Yes, the SB140 is designed to be compatible with both air and coil-sprung shocks
• WHAT PERCENTAGE SAG DO YOU RECOMMEND FOR THE SB140?
  • We would advise starting with 30% sag, or 16.5mm of shock stroke for optimal pedalling efficiency and terrain compliance. Be sure to set your sag at your normal riding weight, gear included. Feel free to venture slightly above or below 30% to suit your personal preference. Visit our shock set-up page to help set up your suspension, https://shocksetup.yeticycles.com/calculator.
• WHAT SIZE SEAT POST DOES THE SB140 USE?
  • The SB140 uses a 31.6mm seat post.
• WHAT SIZE SEAT COLLAR DOES THE SB140 USE?
  • The SB140 uses a 36.4mm seat collar.
• WHAT IS THE WARRANTY ON MY SB140?
  • The SB140 has a LIFETIME manufacturer’s warranty.
• WHAT IS THE LONGEST TRAVEL DROPPER POST I CAN RUN ON THE SB140?
  • This is mostly defined by your inseam. You can run any travel as long as you are above the minimum insert mark and you are not so low your tyre rubs on your saddle or your dropper bottoms out in the frame. Your local Yeti dealer can help you sort this out. We run a 125mm drop on XS-SM frames, a 150mm drop on MD and a 200mm drop on LG-XL.
• CAN I CONVERT THIS BIKE INTO A “MULLET” BIKE AND PUT A 27.5” WHEEL ON THE REAR OF THE SB140?
  • Yes, but it does change the GEO quite a bit. The Headtube angle and seat tube angle get slacker and the bottom bracket gets higher. Some people will like these changes and some won’t but that is up to you to decide.

LIFETIME WARRANTY

HERE’S EVERYTHING YOU NEED TO KNOW ABOUT OUR LIFETIME WARRANTY:

• All 2019 (or newer) frames, including the Switch Infinity, are covered for life against damage due to manufacturing defects for the original purchaser. Paint and finish are covered for 1 year.
• We will repair or replace, at our discretion, any frame we deem defective. There are a few conditions: you must register it online at yeticycles.com and you must take it to an authorized
• Yeti Cycles dealer for processing. The warranty does not cover damage due to ordinary wear and tear, neglect or intentional destruction. From a slingshot or your truck.
• If you happen to have a crash or non-warranty situation, we’ll get you back on the trail with a reasonable replacement price. Same conditions as above.
• Lifetime Warranty applies to all 2019 and newer frames (including the SB100). The model year 2018 and older frames will be covered under our previous warranty (5-year or 2-year based on the time of purchase).
• Simple as that. No fine print.

DISCLAIMER

• Yeti Cycles is not responsible for any damages to you or others arising from riding, transporting or other use of your bicycle.
• If your frame breaks or malfunctions, YETI Cycles shall have no liability or obligation beyond the repair or replacement of your frame under the terms outlined in the warranty.
• If you have a warranty concern, please contact your authorized Yeti Cycles dealer.

YETI CYCLES

• 621 Corporate Circle, Unit
• B Golden, CO 80401
• (p) 303-278-6909
• (f) 303-278-6906
• yeticycles.com.

BUSINESS HOURS

• Monday-Friday
• 8 AM-11:30 AM (MST)
• 1:00 PM-5:30 PM (MST)

References

• Yeti Cycles Home - Yeti Cycles
• shocksetup.yeticycles.com/bikes
• shocksetup.yeticycles.com/calculator
• Yeti Infinity Link User Guide | Bike Help Center | FOX
• Yeti Cycles Home - Yeti Cycles

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>