BON CHARGE 121289 Infrared PEMF Mat User Manual

June 17, 2024
BON CHARGE

BON CHARGE 121289 Infrared PEMF Mat

BON-CHARGE-121289-Infrared-PEMF-Mat-product

Welcome

Congratulations on receiving your very own BON CHARGE Infrared PEMF Mat. Before using your Infrared PEMF Mat please read this User Manual in detail.
The Infrared PEMF Mat has been designed with your safety in mind. However, it’s important to follow basic safety protocols when using this device.

Benefits

The Infrared PEMF Mat has been designed to house multiple optimal wellness components which are listed below:

BON-CHARGE-logoMF-Mat-fig14

Most Infrared PEMF Mats only have Near and FAR Infrared Light built in. At BON CHARGE we know light well! Therefore, we have added 660m red light to your PEMF Mat so you can enjoy the incredible benefits of red-light therapy whilst you PEMF.

Key Points

Activating Your Infrared PEMF Mat

Your Infrared PEMF Mat comes with everything you need to start your journey to an optimal life. You are about to experience the epic benefits of using PEMFs. For the best possible results, it is highly recommended you read this manual prior to using your Infrared PEMF Mat for the first time.

Photosensitivity Test

It is very important to do a photosensitivity test prior to long sessions with your Infrared PEMF Mat. Turn on your Infrared PEMF Mat and switch on the NIR and Red-Light settings. Shine the light on an exposed part of your forearm, about 1 inch away, for 2 minutes. If you experience any discomfort or redness on your skin, you must not use your Infrared PEMF Mat until you have sought professional advice from your doctor or healthcare provider.

Usage Instructions

You should lay your Infrared PEMF Mat on a stable surface prior to use. You can wear clothes or no clothes during a session, it’s completely your choice. When using the Red and Near Infrared Light settings we would recommend the least amount of clothes possible for maximum benefits. We recommend a minimum of 30 minutes per session, but the device can be used for up to 12 hours in one session.

Multiple Usages

Infrared PEMF sessions work best when administered consistently. The best results will be seen from daily use but as a minimum, it is recommend using your Infrared PEMF Mat at least 3 times a week.

What to Expect

Depending on which settings you use you can enjoy the following benefits when used consistently.

BON-CHARGE-logoMF-Mat-fig15

What’s in the Box?

BON-CHARGE-logoMF-Mat-fig16

Controller Configuration

  1. Power Switch (on/off)
  2. QR Code for user manual
  3.  PEMF Button (on/off/levels)
  4. Near Infrared (850nm) and Red Light (660nm)
  5. FAR Infrared Light (Temperature adjustment)
  6. Timer (1 hour to 12 hours)

How To Operate Your Infrared PEMF Mat

Step 1

Remove all components from the box. Lay the Infrared PEMF Mat on the floor or other stable surface and connect the Power Cable/Controller to the mat.

Step 2

BON-CHARGE-logoMF-Mat-fig3

Plug the other end of the Power Cable/Controller into an appropriate power outlet.

Step 3

Turn on the device by pressing and holding the power button until the controller activates (to turn off the device press and hold the power button a further time until controller turns off)

Activating PEMF Settings

Click the icon to toggle through the pre-set PEMF settings. Once you have chosen your setting from the options the PEMF will be activated on the device

PEM settings are as follows:

  • P1 (3Hz) – Delta waves to improve deep sleep.
  • P2 (7.8Hz) – Earthing/Grounding – Earth’s electromagnetic field (Schumann Resonance)
  • P3 (10Hz) – Alpha waves – Increase calm and creativity.
  • P4 (25Hz) – Beta waves – Logical thinking, conscious thought, and meditation
  • P5 – All four settings at 1-2 second intervals

Activating Red Light Therapy
Click the icon to turn on Red Light Therapy (660nm Red Light and 850nm Near Infrared Light)

Activating FAR Infrared Light (Heat)

FAR Infrared Light is controlled by  the ,- section. To choose the level of FAR Infrared Light (Heat) press the + button to turn up the heat and the – button to reduce the heat. The heat range is 0-70 degrees centigrade (see conversion chart for Fahrenheit equivalents). Holding down the buttons will speed up the process if required.

Setting the Timer

The timer is controlled by the section. To choose your desired session time press the + button to increase the time and the – button to decrease the time. The PEMF mat is set up for 1-hour minimum session times at 1 hour intervals to a maximum of 12 hours use.

Temperature Conversion Chart

BON-CHARGE-logoMF-Mat-fig17

Frequently Asked Questions

What is PEMF?

PEMF (Pulsed Electromagnetic Fields) works by sending beneficial low-level frequencies of energy through your body. PEMF has been shown to improve deep sleep, have a grounding effect, increase calmness and creativity, and help with conscious thought and logical thinking. PEMF in our Mat mimics the frequencies found in nature to restore balance

When Can I Use My PEMF Mat?

You can use your PEMF Mat whenever and wherever you wish. Our customers have the best results using their PEMF

Mats in the following ways:

  • Before bedtime
  • Watching TV / reading a book
  • Meditating
  • After a workout
  • Whilst doing Yoga / Pilates/stretching
  • When you need creativity
  • When you are feeling stressed

Technical Specifications

Specifications

BON-CHARGE-logoMF-Mat-fig18

Additional Cautions

  • If you experience discomfort or have a concern about the device, stop use immediately and contact your doctor.
  • For indoor use only.
  • Use only equipment provided with your device.
    If you have any questions, please contact us at hello@boncharge.com

Electrical Safety

  • Do not place or operate the device near to water or liquids.
  • Do not place near or pour running water over the device.
  • This device is not to be used in the vicinity of water.
  • Do not store the device is temperatures exceeding 140F or 60C.
  • Do not use your device if damaged, this may result in electric shock or injury.

Disclaimer

BON CHARGE PEM Mat is not intended to diagnose, cure, or prevent specific diseases or medical conditions. These products are only intended to be used on mild conditions that have been medically diagnosed.

Our PEMF Mat and information contained is not intended as medical advice or a substitute for medical advice.

BON CHARGE does not intend these products to cure any physical or skin conditions solely from their use. A qualified health professional or doctor should always be consulted prior to using the products, and professional medical attention should be sought regarding any serious or life-threatening conditions.

These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Maintenance, Cleaning and Disposal

Maintenance

  • Store the device only when it has cooled down to room temperature.
  • Fold the device correctly and store in the bag provided.
  • Ensure the controller is unplugged from the device before storing.
  • Do not store in hot and humid conditions.
  • Do not put heavy objects on the device.

Cleaning

  • Ensure your PEMF Mat is switched off and unplugged at the wall socket.
  • Clean the surface with a damp cloth.
  • Avoid using any polishes or bleaches as they may damage your device.

Disposal

This device must not be deposed of with your normal household rubbish. This device requires disposal via your designated waste collection point.

Warranty and Returns
Manufacturer’s Warranty (Infrared PEMF Mat) BON CHARGE Pty Ltd warrants that this device (Infrared PEMF Mat) will function and perform within the specifications for one year from the date of delivery.

What does this Manufacturer’s Warranty cover?

This Manufacturer’s Warranty covers any defect in material or workmanship under normal use during the warranty period. During the warranty period, BON CHARGE Pty Itd will repair or replace, at no charge, products or parts of a product that proves defective because of improper material or workmanship, under normal use and maintenance

How long does the cover last?

This Manufacturer’s Warranty for Infrared PEMF Mat purchased from BON CHARGE Pty Ltd is valid for one (1) year from date of purchase. A replacement Infrared PEMF Mat or part assumes the remaining warranty of the original Infrared PEMF Mat.

What does this warranty not cover?

This Manufacturer’s Warranty does not cover any problem that is caused by:

  • Conditions, malfunctions or damage not resulting from defects in the material or workmanship
  • Equipment that has been abused, modified, damaged, or fitted with substitute parts.

What do you have to do?

To obtain warranty service, you must first contact us to determine the problem and the most appropriate solution for you.

Contact details

If service is required, the buyer is responsible for returning the device to BON CHARGE Pty Ltd within the one (1) year warranty period.

BON CHARGE Pty Ltd reserves the right to provide parts in different colors to the original device.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Returns

The Infrared PEMF Mat comes with a risk-free 30-day guarantee.
This 30-day period starts from the day you receive your product. If you’re not satisfied with your purchase during the guarantee period, simply email hello@boncharge.com and we’ll provide a hassle- free return experience.

Here are some details to note:

• Return shipping will be your responsibility. We cannot be responsible for lost or damaged shipments.
• All returns or exchanges must be received in like-new condition with all original accessories and packaging.
• All returns received with damaged or missing components may be subject to additional fees. If applicable, these fees will be deducted from the refunded amount.
• Returns must be postmarked before the end of the 30-day guarantee period. Returns sent after this period will not be accepted.
• A 15% restocking fee will apply for change-of-mind returns.

BON CHARGE Pty Ltd

2/74 Gordon Road East Osborne Park 6017 Western Australia Australia
boncharge.com
boncharge.
FB :boncharge

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BON CHARGE User Manuals

Related Manuals