AWUTZUT A3001 Flap Discs User Manual
- June 17, 2024
- AWUTZUT
Table of Contents
AWUTZUT A3001 Flap Discs
Specifications
- Product: Flap Disc
- Size: 125mm
- Material: Alumina Zirconia
Product Usage Instructions
- Press the spindle lock and remove the presser.
- Put the presser in after loading the wheels.
- Tighten the presser while keeping pressing the spindle lock.
Application and Grit Recommendation
- Heavy Stock Removal: High Density
- Weld Blending: Standard Density
- Deburring/Blending: Standard Density
- Cleaning Finishing: High Density
Manufacturer Information
-
Manufacturer Company:
SHENZHENSHIKAIWENBEIKEJIYOUXIANGONGSI -
Manufacturer Address: A3001, Block 5, Block 1-6, Runke Huafu, the intersection of Zhoushi Road and Hezhou 4th Road, Hezhou Community, Hangcheng Street, Shenzhen Guangdong Province Bao’an District
-
EC REP: Company E-CrossStu GmbH Address60329 Mainzer Landstr.69
-
Email: e-crossstu@outlook.com
-
YH Consulting Limited: C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
-
Email: H2YHUK@gmail.com
-
Phone: +44 07514-677868
Warnings and Safety Instructions
WARNING: Always use safety guards and eye protection during operation.
Explanation of the labeling of abrasive products:
- Always observe the instructions on the abrasive, the grinder, and all accompanying user information.
- Use a grinder suitable for the respective application. Do not use a product that cannot be clearly identified.
- Observe any use restrictions, warnings, and safety instructions on the abrasive and accompanying labels or packaging.
- Follow the provided safety instructions including wearing appropriate protective gear.
FAQ
-
Q: What are the recommended applications for Flap Discs?
A: Weld grinding, blending, deburring, rust removal, surface prep, and edge grinding. -
Q: How should I handle the Flap Disc for usage?
A: Follow the usage steps provided in the manual: Press the spindle lock, remove the presser, load the wheels, put back the presser, and tighten while pressing the spindle lock. -
Q: What safety precautions should I take during operation?
A: Always use safety guards and eye protection. Follow all safety instructions provided on the abrasive and accompanying labels or packaging.
Flap Disc
APPLICATIONS
Weld grinding, blending, deburring, rust removal, surface prep and edge
grinding
Flap Discs offer an unbeatable system for grinding and blending in one easy step. The construction wears away, exposing fresh mineral to extend disc life and provide consistent cut rates.
USAGE STEPS
- Press the spindle lock and remove the presser
- Put the presser in after loading the wheels
- Tighten the presser while keeping pressing the spindle lock
APPLICATION AND GRIT RECOMMENDATION
WARNING : Always use safety guards and eye protection during operation
Explanation of the labeling of abrasive products
-
Always observe the instructions on the abrasive, the grinder and all accompanying user information.
-
Use a grinder that is suitable for the respective application.
A product that can not be clearly identified should never be used. -
Observe any use restrictions, warnings and safety instructions on the abrasive and on the accompanying labels or packaging:
-
MANUFACTURER COMPANY
SHENZHENSHIKAIWENBEIKEJIYOUXIANGONGSI -
MANUFACTURER ADDRESS
A3001, Block 5, Block 1-6, Runke Huafu, the intersection of Zhoushi Road and Hezhou 4th Road, Hezhou Community, Hangcheng Street Shenzhen Guangdong Province Bao’an District -
Company : E-CrossStu GmbH
-
Address：60329 Mainzer Landstr.69
-
Email : e-crossstu@outlook.com
-
YH Consulting Limited
C/O YH Consulting Limited Office 147,Centurion House , London Road , Staines- upon-Thames, Surrey , TW18 4AX H2YHUK@gmail.com -
+44 07514-677868