Lenovo Legion R27i-30 27 Inch Monitor User Guide
- June 17, 2024
- Lenovo
Table of Contents
Lenovo Legion R27i-30 27 Inch Monitor
Product Specifications:
- Model: Lenovo Monitor R27i
- Screen Size: 27 inches
- Resolution: Full HD (1920 x 1080)
- Ports: HDMI 1, HDMI 2, DP, VGA
- Refresh Rate: 60Hz
- Response Time: 4ms
- Brightness: 250 cd/m²
Product Usage Instructions
Setting Up the Monitor:
- Unbox the monitor and remove all packaging materials.
- Place the monitor on a stable surface and adjust the tilt angle as needed.
- Connect the power cord to the monitor and plug it into a power outlet.
- Connect your computer to the monitor using the appropriate cable (HDMI, DP, VGA).
Adjusting Display Settings:
- Press the menu button on the monitor to access the settings menu.
- Use the navigation buttons to adjust settings such as brightness, contrast, color temperature, etc.
- Save your changes and exit the menu when you are satisfied with the display settings.
Using Multiple Inputs:
- To switch between different input sources (HDMI, DP, VGA), use the input selection button on the monitor.
- Select the desired input source to display content from the connected device.
Power Management:
- Enable power-saving features on your computer and monitor to reduce energy consumption.
- Set the monitor to enter sleep mode after a period of inactivity to save power.
Frequently Asked Questions (FAQ):
-
Q: Where can I download the drivers and warranty information for the monitor?
A: You can download the drivers, documentation, and warranty information from here or by scanning the QR code provided in the manual. -
Q: How do I adjust the tilt angle of the monitor?
A: You can adjust the tilt angle by gently tilting the monitor up or down to achieve your desired viewing position. -
Q: Can I connect multiple devices to this monitor simultaneously?
A: Yes, you can connect multiple devices to the monitor using different input ports such as HDMI, DP, and VGA, and switch between them using the input selection button.
The driver’s software, documentations, and warranty information for this monitor can be downloaded from https://pcsupport.lenovo.com/solutions/r27i_30 or scan the QR code.
WHAT IN BOX
INSTALLATION INSTRUCTION
WARNING
The driver’s software, documentations and warranty information for this monitor can be downloaded from https://pcsupport.lenovo.com/solutions/r27i_30 or scan QR code.
Safety information
DANGER
To avoid shock hazards:
Do not remove the covers. Do not operate this product unless the stand is
attached. Do not connect or disconnect this product during an electrical
storm. The power cord plug must be connected to a properly wired and grounded
power outlet. Any equipment to which this product will be attached must also
be connected to properly wired and grounded power outlets. To isolate the
monitor from the electrical supply, you must remove the plug from the power
outlet. The power outlet should be easily! accessible.
Handling: If your monitor weighs more than 18 kg (39.68 lb), it is recommended that it be moved or lifted by two people
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
EPREL registration number: 1656116
Important Battery Recycling and WEEE information
Don’t dispose of your product or battery with your household waste. Refer to
the Compliance Guide that came with your product for further information. or
go to https://www.lenovo.com/recycling
Lenovo R27i-30 supports Lenovo Display Control Center – Artery