YAMAHA VFJ7690 Wireless Speaker Instruction Manual

YAMAHA VFJ7690 Wireless Speaker

Specifications

• Model: WS-B1A
• Type: Wireless Speaker
• Brand: Yamaha
• Compliance: FCC Part 15
• Operating Conditions: FCC compliant, 20cm away from body

Product Usage Instructions

Installation and Setup

1. Locate the serial number of the unit on the bottom or rear of the device.
2. Record the serial number in the provided space for future reference.
3. Ensure to use high-quality shielded cables when connecting the product to accessories or other devices.

FCC Compliance

1. Do not modify the unit as it may void FCC authorization.
2. Follow all installation instructions provided in the manual.
3. If experiencing interference, try relocating the product or affected devices, use different power outlets, or install AC line filters.

Radiation Exposure

1. The equipment should be installed and operated with the radiator at least 20cm away from a person’s body.

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
   This product when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the user manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON” please try to eliminate the problem by using one of the following measures:

• * Relocate either this product or the device that is being affected by the interference.

  • Utilize power outlets that are on different branches (circuit breaker or fuse) circuits or install AC line filter/s.
  • In the case of radio or TV interference relocate/reorient the antenna. If the antenna lead-in is 300-ohm ribbon lead, change the lead-in to a coaxial type cable.

ISED NOTICE (Canada)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from the person’s body.

Wireless communication functions

[U.K. and Europe models] Bluetooth]

• Radio Frequency: 2401 to 2481 MHz
• Maximum Output Power (EIRP): 7.27 dBm

SIMPLIFIED EU DECLARATION OF CONFORMITY / SIMPLIFIED UK DECLARATION OF CONFORMITY

Hereby, Yamaha Music Europe GmbH declares that the radio equipment type [WS- BA] is in compliance with Directive 2014/53/EU and the radio equipment regulations of the UK. The full texts of the EU Declaration of Conformity and the UK Declaration of Conformity are available at the following internet address: https://europe.yamaha.com/en/support/compliance/doc.html

FAQ

Q: What should I do if I encounter radio or TV interference with the product?

A: Try relocating or reorienting the antenna. If using a 300-ohm ribbon lead, change it to a coaxial cable.

Q: Where can I find information on collecting and disposing of old equipment?

A: For details on collection and disposal in EEA, Switzerland, and Turkey, visit the Yamaha website or contact the local representative office.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>