SYART SD-16 Wireless Pro Switch Controller User Guide
- June 17, 2024
- SYART
Table of Contents
SYART SD-16 Wireless Pro Switch Controller
Specifications
Connecting to Switch Console Via Wireless
The Controller can be paired with the Nintendo Switch and Switch Lite console in the following ways:
- Power on a switch Console
- on the main interface of the console, click “Controllers” → “Change grip / Order” to enter the pairing mode interface
- Press and hold the “Home” button on the controller for 3s to power the controller on, and keep holding the “Home” button until
- LEDs in the controller start blinking slowly and then blinking quickly (It takes about 5s).
- When one (or more) of the 4 LEDs is solid bright, it means that the controller is paired with the console successfully.
Connecting to a Paired Switch Console
If your controller was paired with a Switch console ever before, next time, you want to connect your controller to this console, you can press the “HOME” button on the controller shortly to power the controller on, and connect it to a Switch console in sleep or powered-on mode; if the console is in sleep mode, the controller will power on the console and connect with it.
Connecting to PC(X-Input)
- Power on a PC
- Connect the controller to the PC with a data cable
- When the LED 2 is solid bright, it means that the controller is paired with the console successfully.
Note: This controller can just support part of PC games.
How to use the TURBO function
The turbo button causes the game function assigned to the button to fire in rapid succession E.g. Fire 1 bullet when you hit the button once when the turbo is on and you hold down the button, and fire continuously.
Turn on
Hold down the button that you want to set to Turbo, then press the Turbo
button one time.
Turn off
****After setting up Turbo mode, you want to cancel this button’s Turbo
function.
Hold down this button, then press the Turbo button one time
Turbo Speed Adjustment
- You can adjust the Turbo mode to 3 different speeds.
- Turbo speed is set to 12 times/second by default.
- While pressing the Turbo Button, push up on the Right Analog Stick to change the Turbo speed: 20 times/second
- While pressing the Turbo Button, push down on the Right Analog Stick to change the Turbo speed: 5 times/second
Vibration Intensity Adjustment
4-level vibration intensity adjustment: 100% → 70% → 30% → 0%
Strengthen Vibration
Keep Pressing”Turbo”, and then push UP on the Left Analog Stick
Weaken Vibration
Keep Pressing “Turbo”, and then push DOWN on the Left Analog Stick
Charging Status Indication
-
When the controller is disconnected from the console and charging, the
player LEDs will slowly blink → Fully charged, the LEDs will go off. -
When the controller is connecting with the Switch console and charging, the player LED(s) corresponding to the controller number will slowly blink → Fully charged, LEDs will remain lit.
How to turn the controllers off
- When the controller is connecting with the Switch console, by holding down the POWER Button on the top of the console to power it off, the controller will power off as well.
- When the controller is connecting with the Switch console, by holding down the [HOME Button] on the controller for at least 5 seconds to turn it off.
How to calibrate the Control Sticks
- From the HOME Menu select System Settings, then scroll down the menu on the left-hand side and select Controllers and Sensors.
- Select Calibrate Control Sticks then press down on the control stick for the controller you want to calibrate.
- Follow the on-screen prompts to verify the control stick functionality.
How to calibrate the Motion Controls
- Turn off your controller, press and hold the L3 button, then press the R1 button, the LED light on the controller will flash
- Place the controller with the stick facing upward on a flat, stable surface. then press the” + “button on the controller, after that, release the button, and 4 LEDs on the controller will light up.
- The indicator goes off after 3 seconds, controller goes into sleep mode.
- Pressing down the Left stick is the L3 button
Reset function
When the controller is out of order, which can be reset by poking the reset key with a needle.
Specifications
- Working current: 25mA
- Charging current: <180mA
- Size: 158X113X58mm
- Weight: 180g