FIAMMA A20 Expansion Tank Instruction Manual
- June 17, 2024
- FIAMMA
Table of Contents
FIAMMA A20 Expansion Tank Instruction Manual
Package contents
Installation instructions
Check that nothing has been damaged or deformed during transport. In the event
of doubts or questions concerning the installation, use or limitations of the
product, contact the dealer. We recommend that the installation is carried out
by qualifi ed personnel and in compliance with current local regulations.
Check precharge value before installing the expansion tank. The A20 expansion
tank for Fiamma pumps with 1,5 bar pressure switch is ready for use and
precharged at 0,9 bar. For a most effi cient use of other pumps with a
different pressure switch, precharge the A20 expansion tank at the same start
pressure of the pump, or not higher than 3 bar. The A20 expansion tank may be
mounted in any position. The position shown in pictures is recommended, in
order to check the precharge and emptying the water easier. Check the
precharge value once a year.
In case of problems please contact your local dealer indicating the data on
the nameplate. Consult our website for spare parts drawing.
Safety instructions
Fiamma declines all liability for any personal injury or damage due to
mounting or inability to use the product.
Product installation is to proceed according to the mounting instructions; the
product may not be modifi ed or altered in any way. Install the Fiamma A20
expansion tank inside the fi rst metre of the system to optimise and stabilise
the performance of the pumps.
When using for the fi rst time, it’s advisable to proceed with the sanitation
so as to remove any processing waste.
During winter storage if outdoor temperatures are expected <0 ° C it is
absolutely necessary to drain the entire plumbing system. The manufacturer
will not be held responsible for claims for damages resulting from the
following:
-
* Defective installation or connection of the product.- Damage to the product caused by mechanical infl uences.
- Alterations on the device without the express authorization of the manufacturer.
- Use of the product for other purposes not described in the Catalogue.
Warranty
Warranty Fiamma: In case of defects with regards to materials and manufacturing, the customer is entitLed to the warranty in accordance with local laws and regulations of the country in which the product was purchased.
All rights reserved.
Fiamma S.p.A. reserves the right to modify at any time, without notice,
prices, materials, specifi cations and models or to cease production of any
model.
fi amma.com
Fiamma S.p.A. – Italy
Via San Rocco, 56 21010 Cardano al Campo (VA)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>