OLYLO iPad Photo Booth with APP Software Instruction Manual
- June 17, 2024
- OLYLO
Table of Contents
OLYLO iPad Photo Booth with APP Software
Attention
- Before using, please check whether the cables are damaged or stuck.
- Don’t shake too much.
- Place on level ground.
- Assemble the Fixed Plate well to prevent iPad gets damaged.
- Children must be accompanied by an adult.
- Please take off the footcups when putting the photo booth into the flight case for transportation.
Component Introduction
- The attachments received are subject to.
Installation Guide
- Step 1: Open the Simple Flight Case
- Step 2: Assemble the base using an Allen wrench
- Step 3: Install Foot Cups
- Step 4: Insert cable through Ring Light Bracket and plug into Body
- Step 5: Fix the Ring Light Bracket with a screwdriver
- Step 6: Install the Cable Holder
- Step 7: Open the door and plug the cable
- Step 8: Remove the back plate on the Swivel Bracket and install it to the Ring Light Bracket
- Step 9: Adjust the knob to control the tightness
- Step 10: Install the other part
- Step 11: Fix your iPad on
- Step 12: Put on the back of the Swivel Bracket to the back Panel with the Fixed Plate of the Panel
- Step 13: Install Panel to Ring
- Step 14: Install the screw
- Step 15:Plug the cable on Light Bracket and screw it up Panel
- Step 16: Plug the cable for power and ring light
Functions of RF Controller
Light Control via Chacktok
- Download Chacktok from the App Store/Google Play Store
- Register and select iPad Photo Booth Mode, After selecting photo template, you will get into the camera mode.
- Select Light Control at the top and connect to your Photo Booth. A light control function would be available.
- Attention: Open Chacktok, go to ME-FREE VIP, and Enter the code to get 2 months of free VIP
- QR code stickers are subject to the actual product
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>