ABOUTWATER AF/21 Wall Tap Set Installation Guide
- June 17, 2024
- ABOUTWATER
Table of Contents
AF/21 Wall Tap Set
Installation Guide
Instructions
Tools needed
Technical data
| Minimum pressure | 1 BAR |
|---|---|
| Maximum pressure | 10 BAR |
| Reccomended working pressure | 2-5 BAR |
| Maximum water temperature | 80° |
| Maximum water temperature reccomended | 65° |
| Maximum in-let pressure difference (hot – cold) | 1.5 BAR |
Operating instructions
These mixers can be used with cumulos boilers or instantaneous water heaters.
Warning
The supplying pipes must be carefully cleaned before installation.
Remember that the hot water supply must ALWAYS be connected to the tube on the
LEFT.
On first use or following prolonged
periods of inactivity, do not use the first half-litre of drinking water
dispensed.
Shut off the plumbing system in the event of a long absence. Check the water-
tightness regularly.
Advice on product care
To clean the surface use a soap and water solution.
Never use for any reason cleaning solutions containing abrasive substances,
chloric acids, ammonia, vinegar, bleach, domestic acids, disinfectants, or
anytype of abrasive pad.
WARNING! Incorrect cleaning may permanently ruin the surface of the
products and in such case the manufacturer may not be held liable for damage.
The Manufacturer reserves the right to modify product and accessories at any
time without prior notice. Datas, products and sketches included in this
document are just for information and do not bind the producer.
Fratelli Fantini SpA
via Buonarroti, 4
28010 Pella (NO) Italia
T +39 0322 918411 r.a.
F +39 0322 969530
www.aboutwater.it
www.fantini.it
[email protected]
References
- Hosted By One.com | Webhosting made simple
- caso.La
- Encurtador de link - Useall
- Fantini Rubinetti
- Fantini Rubinetti