SAFAVIEH FLL4121 Floor Lamps 60 in Black Shaded Floor Lamp Instruction Manual
- June 17, 2024
- SAFAVIEH
Table of Contents
FLL4121 Floor Lamps 60 in Black Shaded Floor Lamp
Model# FLL4121
Product Dimensions: 21″L X21″W X 61″H
WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as
a safety feature to reduce the risk of electric shock.
this plug will fit in a polarized outlet only one way. if the plug does not
fit fully in the outlet, reverse the plug, if it still does not fit,
contact a qualified electrician. Never use with an extension cord unless the
plug can be fully inserted. do not attempt to defeat this
safety feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather
duster or with an appropriate vacuumbrush
attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods
appropriate to the material. Avoid
the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced
- If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 6 minutes.
- If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE”A” BULB MAX 100‐WATT OR LED BULB MAX 12‐WATT, THERE IS LED 9‐WATT BULB IN THE BOX
| |
---|---|---
Step 1
Make sure all parts could be aligned before assemble
Do not rotate lamp body too hard avoid base screw broken
Screw the Lamp body (B1) onto the Lamp body(B2)
Screw the Lamp body (B) onto the Lamp body (B1)
Screw the Lamp base (A) onto the Lamp body (B)
Be careful not to twist the power cord and tighten securely| Step 2
Insert the Harp (E) into the Saddle (C). Put the shade(F) on
the Harp(E), then tighten the Finial (G) into the Harp (C).
Insert the bulb(H) into the socket(D).|
Step 3
Put the light on a level surface to check if everything is
stable.
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 6 minutes.
- If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
FOR SHADE
| |
---|---|---
Step 1
Carefully remove the coiled Lamp Shade from box and remove all plastic cover,
Combine two sides of shade (J) together with velcro to extend it.| Step 2
Hold the lamp shade (J) and push the Top ring (I) into the 5 metal buckles one
by one, (Top ring as below direction). Push the Bottom Ring (K) into the 5
metal buckles one by one until lock to the ring securely and form a shade.|
Step 3
Turn the Lamp Shade upright and gently
adjust shape of the Lamp Shade.