JYINGJIPN B0C9JV6S2X Plug in Wall Light Instruction Manual
- June 17, 2024
- JYINGJIPN
Table of Contents
JYINGJIPN B0C9JV6S2X Plug in Wall Light
Product Information
Specifications:
- E26 Circle Ring
- Lampshade
- US Outlet
- Dimmer Switch
- USB Charging port
- US plug
Product Usage Instructions
Installation Instructions:
Install the assembled wall lamp body on the wall in the desired location.
Ensure the power is turned off before installation.
- Release the mounting bracket from the backplate installation. Fix the mounting bracket to the wall using an expansion screw. Hang the assembled wall lamp on the mounting bracket and tighten the screws securely.
- Detach the E26 circle ring from the E26 base. Install the lampshade onto the lamp body.
- Attach and tighten the E26 circle ring to secure the lampshade in place.
- Plug the lamp into a socket panel and turn on the dimmer switch.
Warnings:
- The luminaire is designed for use with a 110V power supply.
- Wear gloves during installation.
- Avoid installing the lamp in humid environments.
- Turn off the power before cleaning the lamp.
- Avoid using corrosive cleaning solutions on the lamp.
- Refer to the provided picture for correct assembly of the lighting.
Compatibility:
This lamp works well with incandescent bulbs, halogen bulbs, and dimmable
LED bulbs. Note that normal LED bulbs may not be compatible with this dimmable
lamp.
Installation Options:
The lamp can be installed in two ways:
- Option 1: Plug-in
-
- Cut off the power cord from the plug side.
2. Remove the power cord from the canopy and place it on the backside.
3. Connect the positive and negative wires with wiring caps. The wire with text should be connected to the corresponding pole (positive or negative).
4. The copper wire is the ground wire. Securely fix the canopy to the wire box using screws. Power on to complete installation.- Option 2: Hardwired
(Instructions for hardwired installation can be provided based on specific requirements)
FAQ
Can I use a normal LED bulb with this dimmable lamp?
Normal LED bulbs may not be compatible with this dimmable lamp. It is
recommended to use incandescent bulbs, halogen bulbs, or dimmable LED bulbs
for optimal performance.
Specifications
BOX CONTENT
Installation instructions
Turn off the power before installation
Install the assembled wall lamp body in the ouder of tfhe wall.
- Release the mounting bracket from the backplate installation. fix the mounting bracket to the wall with am expansion screw liang the assembled wall lamp on the mounting bracket,ang tighten the screws that hold the lamp.
- Release the E26 circle ring from the E26 base before installing the lampshade onto the lampbody.
- Install the lampshade ont the lampbody ang tighten the E26 circle ring.
- Plug the plug into the socket pamel and turn the dimmer switch on the lamp
Warning
- The luminaire is used in 110V power supply.
- Wear gloves when installing.
- Do not install the lamp in a humid environment.
- please tum off the power when cleaning the lamp.
- Do not scrub the lamp with a corrosive cleaning solution.6:Please refer to the picture to assemble the lighting.
- Work well with incandescent bulb,halogen bulb and Dimmable LED Bulb(but normal LED bulb couldn’t work for this dimmable lamp)
2 WAYS TO INSTALL
OPTION 1:Plug-in
OPTION 1:Hardwired
- Cut off the power cord from the plug fside
- Pull out the power cord from the camopy and place it no the backside.
- Connect the correspomding positive and negative poles with wiring caps respectively. The positive wire with texe commected to the positive pole, amd the other one no text is megative wire commected to the megative pole. The copper wire is the groumd wire.
- Fix the canopy to the wire box with screws. Install ation is completely finished by power on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>