TOSIMA W2 Window Cleaning Robot Black User Guide
- June 17, 2024
- Tosima
Table of Contents
TOSIMA W2 Window Cleaning Robot Black
W2 Quickly Start Guide
Overview
- ON/OFF/Pause button
- Indicator light
- Air outlet
- Mop holder
- Cable
- Upgrade port (for factory use only)
- Error indicator light (green/red)
- Safety cable mounting hole
INSTALLATION INSTRUCTIONS
- Ensure the knob of the safety cable
- Installation of Mops is fully tightened to the frame.
- Please make sure the Mop Holder is installed in proper position before use.
- Cover each mop holder with a mop.
- Insert the window cleaner power cord into the end of the adapter and tighten them connect the two ends of the ac wire to the adapter and the socket respectively.
PATH PLANNING
Long press the Power / Start button to turn the robot on, and then short press the button to start it, and the robot will automatically move upward, then move right. At last, it will reach the top right corner of the glass. Then starts to clean from top to bottom in an “S” shape. After clean, the robot will stop at the lower-left or right corner according to the glass shape.
REMOTE CONTROL
Notes:
- Press the start button to turn on the device in automatic mode.
- Press the “Pause/continue” button before the automatic mode has been switched to manual mode. automatic mode has been switched to manual mode.
- Press the “Pause/continue” button before the manual mode has been switched to automatic mode, then select the “x1 or x2” button.
To prevent misuse by children, please press the pause button between commands via remote controller. Otherwise, the controller commands button is invalid.
Manufacturer:
Tosima manufacturing(shenzhen) Co., Ltd.
Address: Room 213, Building A2, Fuhai Information Port, Fuhai Street,
Baoan District, Shenzhen City, GD, China
www.tosima.cn
E-mail: cs@tosima.cn
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>