milwaukee M18ONEFMTIW2FC12 Mid Torque Impact Wrench Instruction Manual

milwaukee M18ONEFMTIW2FC12 Mid Torque Impact Wrench

Specifications:

• Model Numbers: M18 ONEFMTIW2FC12, M18 ONEFMTIW2PC12
• Product Name: M18 FUELTM Controlled Mid-Torque Impact Wrenches

Product Usage Instructions

General Power Tool Safety:
Before using the impact wrench, carefully read and understand the operator’s manual to reduce the risk of injury. Follow all safety warnings and instructions provided with the power tool. Save these instructions for future reference.

Work Area Safety:
Ensure your work area has proper ventilation, dust extraction, and collection facilities to prevent ignition of dust or fumes by sparks created by power tools. Always follow tool safety principles to avoid severe injuries.

Power Tool Use and Care:
Choose the correct power tool for your application to work more efficiently and safely. Use common sense when operating the tool and avoid using it when tired or distracted to prevent hazardous situations.

Electrical Safety:
Only use chargers recommended by the manufacturer for the specific battery pack to prevent accidents. Avoid picking up or carrying the tool with your finger on the switch to prevent unintended activation.

Personal Safety:
Wear appropriate protective equipment such as eye protection, dust masks, non- skid safety shoes, hard hats, or hearing protection to reduce the risk of personal injuries while operating the impact wrench.

Battery Tool Use and Care:
Always use the recommended battery packs for the impact wrench to ensure proper functioning and safety. Do not use the tool if you do not understand the operating instructions; seek additional information or training if needed.

FAQ:

Q: How can I reduce my exposure to chemicals while using the impact wrench?
A: Work in a well-ventilated area and use approved safety equipment like dust masks designed to filter out microscopic particles.

Cat. No.
M18 ONEFMTIW2FC12, M18 ONEFMTIW2PC12
M18 FUEL™ CONTROLLED MID-TORQUE IMPACT WRENCHES

WARNING
To reduce the risk of injury, user must read and understand operator’s manual.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING Rons, illustrations ring spestictions provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi- risks. Wetere sterik. a power tool will increase the

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
  Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of a RCD reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

POWER TOO IICE AND CAPE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools.
  Such preventive safety measures reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of iniury and fire.

• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
  Liquid ejected from the battery may cause irritation or burns.

• damage or a batted. Damaged of moat id batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.

• Do not expose a battery pack or tool to fire or excessive temperature.
  Exposure to fire or temperature above 130°C (265°F) may cause explosion.

• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range testructions. Charging spinprope in the improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

SERVICE

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorised service providers.

SPECIFIC SAFETY RULES FOR IMPACT WRENCHES

• Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting tool may contact hidden wiring.
  Contact with a “live” wire will also make exposed metal parts of the power tool “live” and could give the operator an electric shock.

• Wear ear protectors when impact drilling.
  Exposure to noise can cause hearing loss.

• Use only sockets and other accessories specifically designed for use on impact wrenches and drivers. Other sockets and accessories might shatter or break causing injury.

• Over-torquing can cause damage. Do not flex the head of the tool for leverage. Excessive force on the tool in anyway will cause permanent damage.

• Damaged accessories can cause injury. Inspect accessories to insure a snug fit on fasteners to prevent slippage. Ensure the accessories being used are rated for the torque being applied.

• Chemical Burn Hazard. Keep coin cell battery away from children.

• If using with a lanyard, do not exceed maximum capacity marked on the lanyard label. Always determine the weight of the product, with all accessories, when selecting the appropriate lanyard system. Exceeding maximum capacity may result in serious injury. See specifications for tool and battery weight.

• For best results, use only with energy-absorbing lanyards. Ropes, straps or chains may break and cause failure. Do not use with lanyards at full tension.

WARNING Working the risk of sir, when, wear appropriate respiratory protection or use a suitable dust extraction solution.

• Always use common sense and be cautious when using tools. It is not possible to anticipate every situation that could result in a dangerous outcome. Do not use this tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact MILWAUKEE® Tool or a trained professional for additional information or training.
• Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE® service facility for a replacement.

WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE ADDITIONAL BATTERY SAFETY RULES

WARNING To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach- containing products, etc., can cause a short circuit.

WARNING
Do not charge non-rechargeable batteries.

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per Minute (RPM)

Impacts per Minute Under Load (IPM)

Read operator’s manual

Regulatory Compliance Mark (RCM).

This product meets applicable regulatory requirements.
Do not dispose of electric tools together with household waste material. Electric tools and electronic equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

SPECIFICATIONS

• Volts ………………………………………………….. 18 V DC
• Battery Type …………………………………………. M18™
• Charger Type ………………………………………… M18™
• Weight …………………………………..1.8 kg (Tool-only)
• Recommended Ambient
• Operating Temperature ……………….. -17°C to 51°C
• Cat. No. ………………………. M18 ONEFMTIW2FC12
• Anvil Type …………………………….1/2″ Friction Ring
• RPM…………………………………………………… 0-2,400
• IPM ……………………………………………………. 0-3,000
• Cat. No. ………………………. M18 ONEFMTIW2PC12
• Anvil Type …………………………………1/2″ Pin Detent
• RPM…………………………………………………… 0-2,400
• IPM…………………………………………………….. 0-3,000
• Recommended
• Lanyard………… MILWAUKEE® Energy Absorbing

FUNCTIONAL DESCRIPTION

1. 1/2″ friction ring (M18 ONEFMTIW2FC12)
2. LED performance indicator
3. Handle
4. Lanyard loop (M18 ONEFMTIW2PC12)
5. Drive control button
6. Trigger
7. Direction control switch
8. Tri-LEDs
9. 1/2″ pin detent (M18 ONEFMTIW2PC12)

ASSEMBLY

WARNING

Recharge only with the charger specified for the battery. For specific Charging instructions, read the operator’s manual supplied with your charger and battery.

Inserting/Removing the Battery
To insert the battery, slide the pack into the body of the tool. Make sure it latches securely into place.

WARNING
Only use accessories specifically recommended for this tool. Others may be hazardous.
To remove the battery, push in the release buttons and pull the battery pack away from the tool.

• Always remove the battery pack any time the tool is not in use.

Attaching and Removing Accessories

1/2″ Impact Wrench with Friction Ring
(Cat. No. M18 ONEFMTIW2FC12)

1. WARNING Rhe tole battery to avoid starting
2. Use only the appropriate size Square Drive Sockets.
3. To attach a socket, align the accessory with the anvil and push it firmly over the retaining ring.
4. To remove the accessory, pull the accessory off the anvil.

1/2″ Impact Wrench with Pin Detent
(Cat. No. M18 ONEFMTIW2PC12)

1. WARNING Rhe tole battery to avoid starting
2. Use only the appropriate size Square Drive Sockets.
3. To attach a socket, align the hole in the accessory with the detent pin on the anvil. Hold the detent pin in while pushing the socket onto the anvil. The detent pin will snap into place in the hole to secure the socket.
4. To remove the socket, insert a nail or other thin object into the hole in the accessory and press in the detent pin. Pull the accessory off the anvil.

ONE-KEY T™
To learn more about the ONE-KEY ™ functionality for this tool, go to milwaukeetool.com/One-Key. To download the ONE-KEY™ app, visit the App Store or Google Play from your smart device.

ONE-KEY™ Indicator

Solid Blue| Wireless mode is active and ready to be configured via the ONE- KEY™ app.
Blinking Blue| Tool is actively communicating with the ONE-KEY™ app.
Blinking Red| Tool is in security lockout and can be unlocked by the owner via the ONE-KEY™ app.

OPERATION

WARNING To reduce the risk of injury, always wear proper protection marked to comply with AS/NZS 1337.1.
The drive conrol auton i used to adjust the torque, rotation speed (RPM), and impact speed (IPM) for the application.

To select the drive control mode:

1. Pull and release the trigger to turn on the tool.
   The current mode indicator is lit.

2. Press the drive control button to cycle through the Nmodes.
   Select wireless to change the default settinas via the ONE-KEY™ App on your smart device. When the desired mode indicator is lit, begin work.
   NOTE: Select the torque range in accordance with the equipment manufacturers fastening instructions. For precision applications, confirm the final tightening torque with a calibrated device.

Using the Control Switch
The control switch may be set to three positions: Mforward,reverse and lock. Due to a lockout mechanism, the control switch can only be adjusted when the ON/OFF switch is not pressed. Always allow the motor to come to a complete stop before using the control switch.
For forward (clockwise) rotation, push in the control switch from the right side of the tool. Check the direction of rotation before use.
For reverse (anticlockwise) rotation, push in the control switch from the left side of the tool. Check Mdirection of rotation before use.
To lock the trigger, push the control switch to the center position. The trigger will not work while the Mcontrol switch is in the centre locked position.
Always lock the trigger or remove the battery pack before performing maintenance, changing accessories, storing the tool and any time the tool is not in use.

Direction Lock
Use the direction lock feature via the ONE-KEY T™ app to restrict the tool direction to either FORWARD or REVERSE.

| Control switch in forward| Control switch in reverse
---|---|---
ONE-KEY™
Direction Lock set to FORWARD| Tool will run in forward only| Tool will not run, LED performance indicator will light
ONE-KEY™
Direction Lock set to REVERSE| Tool will not run, LED performance indicator will light| Tool will run in reverse only
ONE-KEY™
Direction Lock set to OFF| Tool will run in forward| Tool will run in reverse

Selecting Speed

Allow the tool to come to a complete stop before changing speeds. Press the selector button to cycle between the settings.

ONE-KEY ™ Enabled Modes

WARNING Scan the QR code below and instructions,illustrations, and specifications for each of the enabled modes for this tool. Use the proper tool mode and mode settings in the ONE-KEY™ app for the intended application. Property damage,breakage, or other damage or failure can occur if the mode’s instructions are not properly followed.
Read all safety warnings, instructions,illustrations and specifications supplied with the parts, accessories, fixture, attachment, etc.
Only use with approved items as designated in the ONE-KEY T™ app.
Always confirm the final tightening torque with a calibrated torque tool when precision fastening is required.

Scan this QR code to access
Operation instructions and the most up to date product use information.
To signify that the tool may be out of an acceptable performance tolerance the LED performance indicators will flash. Refer to the trouble shooting section in the ONE-KEY™ app. The tool will still operate, but may not be delivering the desired output.

NOTE: The US model designations are used:

• M18 ONEFMTIW2FC12 – 3062-20
• M18 ONEFMTIW2PC12 – 3062P-20

Starting, Stopping and Controlling Speed

1. To start the tool, grasp the handle(s) firmly and pull the trigger.
   NOTE: The LEDs are turned on when the trigger is pulled and will go off shortly after the trigger is released.

2. To vary the speed, increase or decrease the pressure on the trigger. The further the trigger is pulled, the greater the speed.

3. To stop the tool, release the trigger. Ensure the tool has come to a complete stop before laying the tool down.

Impactina Techniaues

The longer a bolt, screw, or nut is impacted, the Mtighter it will become. To help prevent damaging the Mfasteners or workpieces, avoid excessive impacting.
Be particularly careful when impacting smaller Mfasteners because they require less impacting to Mreach optimum torque.
Practice with various fasteners, noting the length of Mtime required to reach the desired torque. Check the Mtightness with a hand-torque wrench. If the fasteners Mare too tight, reduce the impacting time. If they are not tight enough, increase the impacting time.

Oil, dirt, rust or other matter on the threads or under Mthe head of the fastener affects the degree of tightness. The torque required to loosen a fastener averages 75% to 80% of the tightening torque, depending on the condition of the contacting surfaces.
On light gasket jobs, run each fastener down to a Mrelatively light torque and use a hand torque wrench for final tightening.

MAINTENANCE

WARNING Tways up lug the charger and remove the battery pack trom the charger or tool before performing any maintenance. Never disassemble the battery pack, charger, or tool, except as provided in these instructions.
Contact a MILWAUKEE® service facility for ALL repairs.

Maintaining Tool
Keep your tool, battery pack and charger in good repair by adopting a regular maintenance program.
Inspect your tool for issues such as undue noise, misalignment or binding of moving parts, breakage of parts, or any other condition that may affect the tool operation. Return the tool, battery pack, and charger to a MILWAUKEE® service facility for repair. If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger and battery pack, to a MILWAUKEE® service facility for repairs.

ONE-KEY T™

WARNING Chemical Burn Hazard.
This device contains a lithium button/coin cell battery. A new or used battery can cause severe internal burns and lead to death in as little as 2 hours if swallowed or enters the body.
Always secure the battery cover. If it does not close securely, stop using the device, remove the batteries, and keep it away from children. If you think batteries may have been swallowed or entered the body, seek immediate medical attention.

Internal Coin Cell Battery
An internal coin cell battery is used to facilitate full ONE-KEY ™ functionality.

To replace the coin cell battery:

1. WARNING Remove tool’s battery to avoid starting the tool. The coin cell battery door is located under the battery pack.
2. Loosen the screw(s) and open the coin cell battery door.
3. Remove the old coin cell battery, keep it away from children, and dispose of it properly.
4. Insert the new coin cell battery (3V CR2032), with the positive side facing up.
5. Close the battery door and tighten the screw(s) securely.

Cleaning
Clean dust and debris from vents. Keep handles soap and a dame cloth to reese, since certain and a damp cloth to clean, since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include petrol, turpentine, lacquer thinner, paint thinner chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.

Repairs
For repairs, return the tool, battery pack and charger to the nearest authorised service centre.

ACCESSORIES

WARNING
Use only recommended accessories. Others may be hazardous.

For a complete listing of accessories, go online to milwaukeetool.com.au / milwaukeetool.co.nz or contact an authorised distributor.

WARRANTY

AUSTRALIA and NEW ZEALAND

Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold by authorised dealers in Australia and New Zealand.

SERVICE- AUSTRALIA and NEW ZEALAND

MILWAUKEE® prides itself in producing a premium quality product that is Nothing But Heavy DutyTM. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.

For a list of MILWAUKEE® dealers, guarantee or service agents please contact MILWAUKEE® Customer Service or visit our website.
(Australia Toll Free Telephone Number 1300 645 928)
(New Zealand Toll Free Telephone Number 0800 645 928) or visit milwaukeetool.com.au/milwaukeetool.co.nz.

Milwaukee Electric Tool Corporation
13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005
Milwaukee Tool (Australia)
26 – 40 Nina Link, Dandenong South, Victoria, 3175, Australia

Milwaukee Tool (New Zealand)
274 Church Street, Penrose,Auckland, 1061, New Zealand

DESIGNED BY MILWAUKEE ELECTRIC TOOL CORP. PROFESSIONALLY MADE IN CHINA
PRINTED IN CHINA

References

• Milwaukee Tool | Official New Zealand Site of Milwaukee Tool | Nothing but HEAVY DUTY®
• Milwaukee Tool | Official Australia Site of Milwaukee Tool | Nothing but HEAVY DUTY®
• Track Tools with ONE-KEY™: Free Inventory App by Milwaukee®

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>