INSIGNIA NS-HTVMM1703-C Full Motion TV Wall Mount Instruction Manual
- June 17, 2024
- Insignia
Table of Contents
INSIGNIA NS-HTVMM1703-C Full Motion TV Wall Mount
Product Specifications
- Model: NS-HTVMM1703-C
- Dimensions :
- Height: 17.5 in. (445 mm)
- Width: 11.9 in. (302.5 mm)
Product Usage Instructions
- Locate the center of a stud with a stud finder.
- Align the center of the template at the height determined in Step 4 in the User Guide.
- Ensure the template is level, then tape it to the wall.
- Drill four pilot holes through the template 2 in. (50 mm) deep using a 3/16 in. (5 mm) drill bit.
- Remove the template after drilling the pilot holes.
OPTION 1: WOOD STUD WALL
Make sure that the wall-mount arm is perpendicular to the wall plate. Align the wall plate with the pilot holes, then insert the lag bolts through the washers and wall plate holes. Make sure that the wall plate is level, then tighten the lag bolts.
TOOLS NEEDED
Wall mount template
Warning: Improper installation can result in serious personal injury or TV damage. If necessary, seek the assistance of a professional
LEVELING EDGE
OPTION 2: SOLID CONCRETE OR CONCRETE
FAQ
Frequently Asked Questions
- Q: Can I use this wall mount on drywall?
- A: The wall mount template specifies drilling into concrete only. For drywall installations, consider using appropriate anchors and screws for mounting.
- Q: What if I don’t have a stud finder?
- A: If you don’t have a stud finder, you can use alternative methods like tapping the wall to listen for solid sounds or using a magnet to locate screws or nails in the wall.
Read User Manual Online (PDF format)
Loading......