Pro Breeze PB-H16 2000W Golden Halogen Lamp Infrared Heater Instruction Manual

Pro Breeze PB-H16 2000W Golden Halogen Lamp Infrared Heater

Product Information

• Specifications
  • Model: PB-H16
  • Voltage: 220-240V
  • Frequency: 50/60 Hz
  • Power: 2000W Max
  • Product Dimensions: 6610.57.2 CM
  • Net Weight: 1.7 KG

Product Usage Instructions

• Safety Instructions
  • Ensure a minimum safety distance of 100cm / 3 feet is maintained in front of the heater.
  • Do not place any objects, including furniture and clothes, close to the heater.
• Set Up – Parts Supplied
  • Check that you have all the supplied parts before proceeding with the assembly.
  • The parts include screws, nuts, washers, brackets, and batteries.
• Set Up – Equipment Required
  • You may need additional equipment based on your assembly space.
  • Ensure you have a power drill, ruler, pen, and suitable screws and wall plugs for installation.
• Set Up & First Use
  • Set up the heater in a well-ventilated area away from obstructions.
  • Follow the assembly instructions carefully, the estimated assembly time is 30 minutes. Ensure to use AAA batteries (not included) if required.
• How to Assemble the Unit
  • Connect L brackets to the heater using provided screws and washers.
  • Avoid facing the heater towards the ceiling or flammable substances.
• How to Attach to Wall/Ceiling
  • Measure and mark hole positions on the L-shaped brackets.
  • Drill holes carefully ensuring there are no wires or pipes behind the wall.
  • Secure the unit using the provided explosion screws and nuts, tightening each nut individually until firmly anchored.
• Frequently Asked Questions (FAQ)
  • Q: Can I mount the heater on the ceiling?
  • A: Yes, you can mount the heater on the ceiling following the provided instructions for attachment.
  • Q: What should I do if I notice dark points on the heating elements?
  • A: It is normal for dark points to appear initially; this does not affect the performance of the heater.
  • Q: Is it safe to test the product before mounting it on the wall?
  • A: Yes, it is recommended to test the function of the product before mounting it to ensure proper operation.

SAFETY INSTRUCTIONS

• WARNING: To avoid the risk of electrical shock, fire or injury to people, always make sure the heater is unplugged from the electrical outlet before installing, relocating, servicing, or cleaning it.
• WARNING: This heater is for domestic outdoor use only. Do not use this heater indoors.
• CAUTION: The heater head reaches high temperatures during operation. Do not touch the heater head when in use. Be aware that the heater head will remain hot for some time after use. Particular attention must be taken where children and vulnerable people are present.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction.
• The heater must be installed at a minimum height of 1.8m (180cm) from the floor and have a 40cm (400mm) clearance from the roof/ceiling.
• A minimum safety distance of 100cm should always be left in front of the heater.
• This heater must be securely fixed to a wall using the accessories supplied, before use.
• Children must be supervised not to play with the appliance.
• Children of less than 3 years should be kept away unless continuously supervised.
• Do not leave children alone or unattended in the area where the appliance is in use.
• Cleaning and user maintenance shall not be made by children unless continuously supervised.
• Do not cover the heater or use this heater to dry or heat clothes or other fabrics.
• Avoid sitting directly underneath the heater.
• This heater should be plugged into a mains power socket which is easily visible and reachable.
• Don’t use this heater in a place where causticity or volatile air exists, i.e. dust, steam, gas, etc.
• The heater must not be located immediately below a socket outlet.
• Do not immerse in water or use this heater near water or in the immediate surroundings of a bath, shower, sauna, or swimming pool.
• Never leave the heater unattended while in use. Always turn the heater off and unplug when not in use.
• Do not place this heater near flammable materials, surfaces or substances. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet /1m from the heater.
• Use the heater in a well-ventilated area.
• Always turn the heater OFF, unplug the power cord from the electrical outlet and allow the appliance to completely cool down before handling or cleaning it.
• Never insert fingers or metal objects into the vents and openings of the heater as this may cause an electric shock, fire or damage to the heater.
• To avoid a circuit overload when using this heater, do not operate another high-wattage heater on the same electrical circuit.
• Always plug the heater directly into a wall socket. Avoid using extension leads where possible as they may overheat and cause a risk of fire.
• Do not use this appliance with an external programmer, timer switch or any other device which would switch the device on automatically unless this has already been pre-built into the appliance by the manufacturer.
• Do not kink or wrap the power cord and plug around the appliance, as this may cause the insulation to weaken or split, particularly where it enters the appliance.
• Ensure the mains cable is fully extended before use and arrange it so that it is not in contact with any part of the appliance.
• Do not pull on the mains cable. Never move, carry or hang the appliance by the mains cable.
• Do not operate the appliance with any safety guards removed.
• Ensure that the power cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
• Do not operate the appliance if there are signs of damage to the appliance, power cord, or any of the accessories.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person to avoid a hazard.
• Do not attempt to repair or adjust any electrical or mechanical elements in the appliance. Doing so may be unsafe and will void your warranty.
• Ensure that the mains supply (including voltage, frequency and power) complies with the rating label of the appliance.
• Do not use the appliance near petrol, paints, flammable gases, ovens, or other heating sources.
• Do not use the heater indoors or for heavy-duty, commercial or industrial use. The unit is not safe for use on building sites, or in greenhouses, barns or stables where there is flammable dust.
  • NOTE: After receiving the product, please test the function before mounting it on the wall.

SPECIFICATION

• Model: PB-H16
• Voltage: 220-240V ~
• Frequency: 50/60 Hz
• Power: 2000W Max
• Product Dimensions: 6610.57.2 CM
• Net Weight: 1.7 KG

Please Note: A minimum safety distance of 100cm / 3 feet should always be left in front of the heater. Do not place any objects, including furniture and clothes close to the heater.

PARTS SUPPLIED

SET UP – PARTS SUPPLIED

Ensure you have all the pieces listed. Do not proceed with the set-up and assembly of the heater if any components are missing.

• A. 4 pcs explosion screws (M6*60mm)
• B. 4 pcs cross-recessed hex screws (M6*10mm)
• C. 2 pcs hex screws (M6*12mm)
• D. 4 pcs hex nuts (M6)
• E. 8 pcs flat washers (M6)
• F. 8 pcs split lock washers (M5)
• G. 2 pcs wing nuts (M6)
• H. 4 pcs L shape brackets

SET UP – EQUIPMENT REQUIRED

Note: some equipment may vary based on the assembly space.

• Phillips screwdriver
• 8mm spanner
• 10mm spanner
• Drill & masonry drill bit (8mm diameter).
• Ladder
• Hammer
• Pen or marker
• Ruler

SET UP & FIRST USE

• Estimated Assembly Time: 30 minutes
• Batteries: 2 x AAA batteries are required. Not included. IP 65 Approved when used with IP65 rated socket.
• IMPORTANT: When drilling into walls always check that there are no hidden wires or pipes. Ensure that the screws and wall plugs being used are suitable for supporting the unit to be installed. If you are unsure it is recommended you contact a suitable qualified tradesperson. Set up the heater outside, or in a large open area and well away from any obstructions such as tree branches.
• Ensure the heater is not facing the ceiling or inflammable substances.
• NOTE: Two dark points may appear on the surface of the heating elements during the first few minutes after the heater is turned on. This is normal and will not affect the performance of the heater.

ASSEMBLING INSTRUCTIONS

WARNING

• The heater should always be installed horizontally, only using the mounting brackets supplied.
• Ensure the supply cable is well mounted and that it does not touch the reflector on the heater.
• Ensure the supply cable does not trail in front of the heater while it is in operation.
• The supply cable can be fixed to the metal mounting bracket behind the heater with plastic zip ties.

HOW TO ASSEMBLE THE UNIT

• Step 1: Connect 2 L brackets (H) to the heater as shown. Do this using a Phillips screwdriver with 4 components of B, E & F (see order pictured).
• Step 2: With the remaining L brackets (H) connect explosion screws as shown. This can be done by hand, using components (A, D, E, F).

HOW TO ATTACH TO WALL/CEILING

• Step 1: On the L-shaped Brackets (H), measure the pitch between the pair of holes desired for use, with a ruler.
• Step 2: Using a pen, mark the same distance where you are going to drill (determine hole depth beforehand).
• Step 3: Using a power drill and an 8mm masonry drill bit, drill holes. ENSURE THERE ARE NO WIRES OR PIPES BEHIND THE WALL.
• Step 4: Fit explosion screws into the wall, and tighten nut D. Tighten each nut individually, a small amount each until the unit is firmly anchored.
• Step 5: Connect heater attached L Brackets to the explosion screw L Brackets (fitted into the wall) using components C & G as shown. Use a 10mm spanner if necessary.

OPERATING ANGLE

WALL ANGLE

• Do not face the heater at 90° towards the ceiling.
• Only face downwards at a maximum angle of 135° see below.

CEILING ANGLE

• Do not face the heater at 90° towards the walls.
• Do not face the fan directly down 180°. Only face at 135° angles.

OPERATING INSTRUCTIONS

• Switch On/Off Button- To switch on the heater, press the rocker switch to the On position.
• Mode Switch Button – Press the mode button to alternate between three different modes. For each mode, the LED light indicator will illuminate a different colour:
• Red: The heater is in the standby mode.
• Green: The heater is in the low heat mode.
• Blue: The heater is the high heat mode.

Remote Control

NOTE: Ensure the rocker switch is set to “ON” before using the remote.

CLEANING, MAINTENANCE & STORAGE

• WARNING: Always turn the heater OFF, unplug the power cord from the electrical outlet and allow the appliance to completely cool down before handling or cleaning it. Allow the heater to cool down for 2 hours (120 minutes) before cleaning.
• CAUTION: Do not allow water or other liquids to run into the interior of the heater, as this could create a fire and/or electrical hazard.
• CAUTION: Do not use any abrasive cleaners or solvents, as heater damage will occur.
• IMPORTANT: The bulb inside the heater is not replaceable. Do not attempt to remove or disassemble the heater.
  • Clean the exterior surface of the heater by wiping it with a soft, damp cloth. Dry the heater with a soft clean cloth.
  • Clean the vents and openings of the heater with a vacuum cleaner, using the brush attachment to avoid any dust build-up.
  • To store your product out of season, we recommend using the original or similar size box.
  • Do not kink or wrap the power cord and plug around the appliance, as this may cause the insulation to weaken or split, particularly where it enters the appliance.
  • Store the heater in a safe, clean and dry place when not in use.

RECYCLING AND DISPOSAL

• Waste electrical and electronic products (WEEE), batteries, accumulators and packaging should not be disposed of with general household waste.
• This is to prevent possible harm to the environment and human well-being and to help conserve our natural resources.
• Most electrical products with a plug, battery, or cable can be recycled. Contact your local council, household waste disposal service, or the store where you purchased the product for information regarding the collection schemes in your area.
• Waste Electrical and Electronic Equipment (WEEE)
• This symbol on the product and/or packaging indicates that Waste Electrical products (WEEE) under Directive 2012/19/EU which governs used electrical and electronic appliances, should not be disposed of with general household waste.

The Mobius Loop

• This symbol indicates that the product or packaging is capable of being recycled.

Take-Back Scheme

• Waste electrical products (WEEE) can be sent to One Retail Group for recycling and disposal when you purchase a new product from One Retail Group, on a like-for-like basis.
• For more information on how to recycle this product please visit www.probreeze.com.
• The end-user of electrical and electronic products (WEEE) is responsible for separating old batteries and lamp bulbs before they are handed over to a designated disposal and recycling service.
• Waste batteries can also be disposed of in collection bins, which can be found in most local supermarkets and household waste recycling centres.

Model PB-H16 2000W Golden Halogen Lamp Infrared Heater

CONTACT

• www.probreeze.com.
• One Retail Group, Ryland House
• 24a Ryland Road, London, NW5 3EH, United Kingdom
• EU Authorised Representative: Brandrep Limited, The Black Church
• St Mary’s PI N, Dublin, D07 P4AX, Ireland
• © Copyright 2022

References

• Pro Breeze | Free Delivery | Dehumidifiers, Air Cooling & Heaters

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>