TURTLE BEACH Elite Pro Tactical Audio Controller User Guide

TURTLE BEACH Elite Pro Tactical Audio Controller

Product Information

Specifications

• Tactical Audio Controller
• USB Micro Power Cable (max length: 3 meters)
• Micro USB Port Cap for protection
• DTS Headphone: X Surround Modes
• Turtle Beach Signature Audio Presets
• Outbound Mic Boost
• Mic Monitor Level adjustment
• Mic Button for muting outgoing Mic Audio

Product Usage Instructions

Headset Setup
Connect the Tactical Audio Controller to your headset.
Audio Customization

• To cycle DTS Headphone: X Surround Modes, press Surround Mode.
• To cycle Turtle Beach Signature Audio Presets, press Presets.

Audio Controls

• Outbound Mic Boost: Adjust the level of your outbound microphone.
• Mic Monitor Level: Adjust the level of your voice through your headphones.
• Mic Button: Mute outgoing Mic Audio.

Console Setup
PS4 Setup:

1. Go to Settings >> Devices >> Audio Devices
2. Select USB Headset(Turtle Beach ELITE CHAT) for Input & Output Device
3. Set Output to Headphones to Chat Audio
4. Set the Volume Control (Headphones) level to maximum

FAQ

• Q: How do I adjust the audio settings on the Tactical Audio Controller?
  A: You can adjust the audio settings by pressing the designated buttons for Surround Modes, Audio Presets, Mic Boost, Mic Monitor Level, and Mic Mute.

• Q: Can I use the Tactical Audio Controller with a PC?
  A: Yes, you can set up the Tactical Audio Controller with a PC by following the provided PC Setup Configuration instructions.

IMPORTANT
READ BEFORE USING

Any questions?
turtlebeach.com/eliteprotac 

Package Contents

To comply with regulatory standards, the Power Cable used (USB Mini) cannot be longer than 3 meters.
Always keep the Micro USB Port Cap installed when not in use.

Headset Setup

Unlock the power of pro-level chat with the Turtle Beach Elite Pro Tournament Noise Cancelling Microphone the Elite Pro Headset and the Elite Pro TAC.
For more information please go to: turtlebeach.com/elitepro

Product Features

AUDIO CUSTOMIZATION

AUDIO CONTROLS

ADVANCED FEATURES
AUXILIARY IN
Mix in Music and take calls while you game. ****

LOCAL CHAT SETUP
Create a local lag-free chat network between multiple TACs using a standard ethernet cable*. ****

• Ethernet Cable Sold Separately, To comply with regulatory standards, the Ethernet Cable used cannot be longer than 3 meters

PlayStation® 4 Pro & PS4™ Setup

turtlebeach.com/ps4compatibility

1. Go to Settings » Sound and Screen »Audio Output Settings
   • a. Select Primary Output Port > Digital Out (OPTICAL) > ONLY Dolby Digital 5.1ch
   • b. Select Audio Format (Priority) > Bitstream (Dolby)
2. Go to Settings >> Devices >> Audio Devices
   • a. Select USB Headset(Turtle Beach ELITE CHAT for Input & Output Device
   • b. Set Output to Headphones to Chat Audio
   • c. Set the Volume Control (Headphones) level to maximum

Xbox One Setup

1. Go to Settings >> All Settings >> Display & Sound >>Audio Output
   • a. Select Optical Audio >> Bitstream Out
   • b. Select Bitstream Format >> Dolby Digital

Xbox One Controller with 3.5mm Jack

1. Go to Settings >> All Settings >> Kinect & Devices >>
   Devices & Accessories >> Xbox One Wireless Controller >> Volume

   • a. Set Headset Volume to 50-75%
   • b. Set Headset Chat Mixer to output Chat Only
   • c. Set Mic monitoring to Minimum

Xbox One Controller with Headset Audio Controller

1. Adjust the HAC to output only Chat Audio
2. Hold down Mic Mute to adjust and turn off the HAC Mic Monitoring

PC Setup

1. Right Click on Taskbar Speaker Icon, Select Playback Devices
   • a. Set Turtle Beach ELITE GAME as your default device.
   • b. Select Configure, set Turtle Beach ELITE GAME to 7.1 Surround Sound.
   • c. Set Turtle Beach ELITE CHAT as your default communication device.
   • d. (In Recording Tab) Set Turtle Beach ELITE CHAT as your default device.

PS3™ Setup

1. Go to Settings >> Accessory Settings >> Audio Device Settings
   • a. Select Turtle Beach ELITE CHAT for both Input Device & Output Device
2. Go to Settings >> Sound Settings >> Audio Output Settings
   • a. Select Optical Digital
   • b. Select ONLY Dolby Digital 5.1 Ch
   • c. Set Audio MultiOutput to On

Regulatory Compliance Statements for the Turtle Beach Elite Pro Tactical Audio Controller Model (Elite Pro T.A.C)

Federal Communications Commission (FCC) Compliance Notices

Class B Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15, Subpart B of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation.

Canadian ICES Statements
Canadian Department of Communications Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio-noise emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003.

European Union and European Fair Trade Association (EFTA) Regulatory Compliance

Declaration of Conformity
Marking by this symbol:
indicates compliance with the Essential Requirements of the EMC Directive of the European Union (2004/108/EC). This equipment meets the following conformance standards:

Safety:
EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 (T-Mark License)
IEC 60950-1: 2005 (2nd Edition) + Am 1: 2009 (CB Scheme Report/Certificate),
EN 71-3: 2013

Also Licensed for Standards:
UL 60950-1: 2007 R12.11, CAN/CSA-C22.2 No. 60950-1-07 + A1: 2011
Additional licenses issued for specific countries available on request

Emissions:
EN 55022: 2010 + AC: 2011, CISPR 22: 2008

Immunity:
EN 55024: 2010, CISPR 24: 2010
EN 61000-4-2: (2009), EN 61000-4-3: (2010), EN61000-4-4: 2010, EN 61000-4-6: 2009,
EN 61000-4-8: (2010)
The products are licensed, as required, for additional country-specific standards for the International Marketplace. Additional issued licenses are available upon request.

Environmental :
Low Voltage Directive 2006/95/EC, RoHS 2011/65/EU,
REACH 2006/1907/EC, WEEE 2012/19/EU, Packaging 94/62/EC,
Toys Safety Directive 2009/48/EC

This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.
Please visit the following URL for a complete copy of the declaration of conformity: http://www.turtlebeach.com/homologation

It is important to always run the most up-to-date firmware.
For detailed Preset Customization and firmware update instructions visit: Pour obtenir les informations d’installation les plus récentes, consultez:
turtlebeach.com/eliteprotac

References

• PS4™Compatible Gaming Headsets & Controllers – Turtle Beach®
• Turtle Beach Support
• Turtle Beach Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>