SMOOSAT E9 Pro Electric Scooter User Manual

SMOOSAT E9 Pro Electric Scooter

Product Information

Specifications:

• Product: E9 Pro Electric Scooter
• Maximum Speed: 5 MPH (E gear), 6.5 MPH (N gear), 9.5 MPH (S gear)
• Charging Time: Not specified
• Weight Capacity: Not specified

Product Usage Instructions

Product Installation:

1. Loosen the two screws on the riser clip counterclockwise with a 5mm inner hexagon wrench.
2. Insert the upright pole in place.
3. Tighten the two screws clockwise with a 5mm inner hexagon wrench.

Charger Connection:

1. Remove the dust plug from the charging port.
2. Plug in the charger to the charging port.
3. Cover the dust plug after charging to prevent water damage.

How to Ride and Park:

1. Press the power switch button and ensure the power indicator light is on.
2. Step on the pedal power switch with one foot and slide the other foot on the ground.
3. When the scooter reaches a certain speed, put both feet on the pedals.
4. To stop, step on the rear wheel mudguard to apply friction for braking.

Ambient Light Control:
Press the power switch button to turn on the scooter and press the atmosphere light switch button to control the ambient lights.

Safety Instructions:

• Always wear helmets and protective gear while riding.
• Avoid riding in motor vehicle lanes, residential mixed areas, or stagnant water exceeding 2cm.
• Do not ride with more than one person or with a child.
• Avoid riding up and down stairs, escalators, speed bumps, etc.

FAQ:

Q: How do I adjust the height of the handle?
A: To adjust the height of the handle, loosen the quick-release lock and adjust the telescopic lock as needed. Ensure not to over-tighten the inner hexagonal bolts.

Package Contents

Accessories

The E9 Pro packaging box contains the following parts, if any are missing, please consult the seller:

1. E Scooter
2. Charger
3. Tool bag
4. user’s manual

Product Description

Multi-function code table

Product Installation

• Place the scooter on a flat surface, pull down the folding wrench to unfold the scooter
• Use a 5mm inner hexagon wrench to fix and lock the handle
• Put the handle into the handle-fixing device and pass the screw through the hole on the handle and the fixing device.
• Turn the 5mm inner hexagon wrench clockwise to lock the handle fixing device.
• Adjust the height of the handle, relax the quick-release lock and adjust the telescopic rod to the appropriate height. Then re-fix the lock and remove it quickly.
• The tightness of quick disassembly can be adjusted by manually tightening or loosening the inner hexagonal bolts, and be careful not to over-tighten. It can be opened and locked quickly by hand, and the telescopic rod will not slide and shake.

Charger Connection

Note:
Please use the original lithium battery charger of the scooter to charge it indoors. It is prohibited to use non-original chargers such as lead-acid battery chargers to charge the scooter.

When charging the scooter, please check whether the charging port of the scooter is dry. If it is wet, please wipe the charging port clean before charging. Connect the charger output terminal to the charging port of the scooter, and then connect the charger plug to the power source. The charger indicator light shows red to indicate that the scooter is charging, and green shows that the charging has been completed. At this time, the charger power should be cut off to avoid long-term charging to cause irreversible damage to the scooter battery. After charging is completed, the charging port of the scooter should be plugged with the dust plug to avoid water entering the charging port during use and causing the scooter to short-circuit.

• Remove the dust plug of the charging port
• Plug in the charger
• Cover the dust plug after charging

How to Ride and Park

Before you drive the scooter, for your safety, please be sure to wear the necessary safety gear. Please make sure that you are already proficient in driving the scooter. Please try to wear comfortable casual sports clothing and flat shoes. High heels are forbidden to keep your body flexible.

You can learn to drive on different terrains, and you must slow down if you encounter unfamiliar terrain. Never let the scooter off the ground at any time. The scooter is a supplementary transportation tool designed for use on flat roads. When users are driving on uneven roads, they should slow down and drive slowly. When riding, you must keep your feet on the pedals of the scooter to avoid the danger of unbalanced bikes.

1. Press the power switch button and check if the power indicator light is on
2. Step on the pedal power switch with one foot, and slide the other foot onto the ground
3. When the scooter is sliding at a certain speed, put your feet on the pedals.
4. When you need to switch different speeds, stop in a safe position, and then press the power switch button to switch. The maximum speed of E gear is 5MPH 9.5MPH, the maximum speed of N gear is 6.5MPH, the maximum speed of S gear is 6.5MPH
5. When you need to stop, step on the rear wheel mudguard to apply friction to the brake.

Ambient Light Control

Press the power switch button to power on the scooter and check that the power LED is on. Short press the atmosphere light switch button on the accelerator to switch different types of atmosphere lights.

Safety Instructions

Helmets and protective gear must be worn during driving.

It is forbidden to ride into motor vehicle lanes or residential areas where people and vehicles are mixed, and it is forbidden to ride in stagnant water exceeding 2cm. It is forbidden for more than one person to ride at the same time or ride with a child. It is forbidden to ride up and down stairs or escalators. If you encounter speed bumps, elevators, door thresholds, potholes, etc, please keep the speed low or stop using it. The electric scooter is a kind of sports and entertainment, not a means of transportation, but once you drive it into a public area, it will also have the attributes of a means of transportation. Therefore, it also has the safety risks that all vehicles may have. Strictly following the instructions in this manual will protect the safety of you and others to the greatest extent.

At the same time, you need to understand that once you ride on public roads or other public places, even if you ride normally in this manual, you may face risks caused by illegal driving and improper operation of others or other vehicles. Just like walking or biking can also be injured by other vehicles. As with all vehicles, the faster the driving speed, the longer the distance required for braking. Emergency braking on smooth ground may also cause the wheels to slip and lose their balance and fall. Therefore, it is very important to be vigilant, maintain a proper speed, and keep a reasonable distance from other people and vehicles during riding. Please stay alert and drive at low speed before driving into unfamiliar terrain.

Please respect pedestrians’ right of way when driving. Avoid frightening pedestrians, especially children. Remind pedestrians passing behind and slow down when passing, passing as far as possible from the left side of the pedestrian (for countries where vehicles are driving on the right, pass when facing the pedestrian, keep to the right, and reduce the speed). Electric scooters must be driven per relevant standards and national and regional regulations. Please be sure to strictly abide by the safety requirements of this manual for cyclists. Our company will not bear direct and joint liability for all property and personal damage accidents, legal disputes, and all other unfavourable events that cause conflicts of interest caused by the violation of the use of this manual.

Charging each time you use it can greatly extend the life of the battery, try to avoid recharging the battery after it is completely depleted. According to the characteristics of lithium batteries, the discharge efficiency of lithium batteries is the highest at 25±3°C. As the ambient temperature continues to increase and decrease, the discharge efficiency of lithium batteries shows a downward trend. Typically, in an environment of 0°C, the cruising range of the scooter may be only half or even lower than that at 25°C, but this process is reversible, that is, as the ambient temperature recovers, the discharge efficiency of the lithium battery will recover.

Please perform a basic inspection of the scooter before each driving. If there are obvious abnormalities such as loose parts, reduced battery life, excessive wear of parts, and abnormal noises from the body, please stop using it immediately and do not ride forcibly. Please contact our customer service staff to repair the product.

Folding And Handling

• Turn off the power of the scooter. Pull the folding mechanism to fold the scooter.
• Lift the upright pole of the scooter with one hand or both hands to carry it.

Daily Maintenance

Cleaning and Maintenance
If there are stains on the surface of the scooter body, use a soft cloth dipped in a small amount of clean water to wipe it. If there are stains that are difficult to clean, first use a soft cloth dipped in toothpaste to wipe, and then clean with a damp cloth.

Tips:
Do not use alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to clean, otherwise it will seriously damage the appearance and internal structure of the scooter. It is forbidden to use pressure washer gun to spray, drench, flush or brush. Please make sure that the scooter is turned off when cleaning, the charging cable has been unplugged and the dust plug of the charging port is tightly plugged, otherwise, there may be an electric shock or serious failure due to water entering the scooter.

When not in use, try to store it indoors in a dry and cool place, and try to avoid storing it outdoors for a long time. Sun exposure, overheating, and cold outdoor environment will accelerate the aging of the appearance of the scooter, and the aging of the tyres, and reduce the service life of its battery pack.

Battery Maintenance
Please do not place the battery in a high temperature over 50°C or a low- temperature environment below 20°C (such as the interior of a car exposed to the sun in summer)

It is forbidden to throw the battery pack into a fire, otherwise, it may cause the battery to fail, overheat, or even risk fire. For other battery maintenance precautions, please consult the seller. Avoid recharging after the battery is completely depleted, and try to charge after each use, which can greatly extend the life of the battery. In addition, when used at room temperature, the battery pack can provide a longer riding distance and better performance, the battery life performance will decrease if it is used in an environment below 0°C. Typically, in an environment of 0°C, the riding distance may be only half or less than that at room temperature. The riding distance provided by the battery pack will recover when the temperature rises.

Tips:
A fully-charged scooter will exhaust its stored power after about 20-90 days of standby, and an under-charged scooter will exhaust its power after about 20-50 days of standby. In this case, if the battery is not charged in time, it may cause the battery to be over-discharged and damaged. This damage is irrecoverable. In this case, the damaged scooter will not be able to be recharged and will not be able to enjoy free warranty service. (Note: Non- professionals are forbidden to disassemble the battery pack at will, otherwise it may cause serious safety accidents due to electric shock or short circuit).

Product Parameter

Note:
Due to the different capacities of different subtypes of batteries, the specific parameters shall prevail in kind. Only part of the data range is listed here. Please consult the dealer for details.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>