DONGGUAN JJT-C09 5 In 1 Wireless Charging Clock Night Light User Manual
- June 17, 2024
- Dongguan
Table of Contents
- DONGGUAN JJT-C09 5 In 1 Wireless Charging Clock Night Light
- Product Information
- Product Usage Instructions
- Features
- How to operate
- Night light function
- Key Function
- How to set the clock
- Wireless charging specifications
- Applicable equipment
- Precautions
- FCC Requirement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DONGGUAN JJT-C09 5 In 1 Wireless Charging Clock Night Light
Product Information
Specifications
- 5 in 1 Wireless charging/clock/night light
- Wireless charging distance: 6mm
- Features: Night light, Clock alarm, Wireless fast charging
- Appearance features: Smartphone magnetic wireless charging station, AirPods wireless charging station, iWatch wireless charging station, RGB LED night light, Clock display area, Charging indicator
- Type-C input interface
Product Usage Instructions
How to Operate
- Connect the USB port of the USB cable to the 30W charger and connect the Type-C port to the wireless charger. The working indicator light will flash red and blue alternately, with the red light remaining on to indicate normal operation.
- Place the smartphone in the magnetic wireless charging position. The charging indicator light will show a blue light that remains on during the charging process.
Key Functions
How to Set the Clock
- In normal clock display mode, press and hold the clock button for 3 seconds to enter the clock setting state. Use short presses to adjust hours and minutes.
- To save the settings and return to the time display, press and hold the clock button for 3 seconds.
Alarm Clock Attention
- In normal clock display mode, adjust the alarm display time according to the A/P icon prompt for 12-hour mode.
- To snooze, short press the alarm button once to turn off the alarm. If not turned off, the alarm will sound for 1 minute and then ring again after 5 minutes.
Night Light Function
- Touch the LED night light switch to turn on the warm light.
- The second touch changes to RGB colorful LED night light.
- Touch it again to turn off the LED light.
Button Introduction
Refer to the user manual for detailed button functions and settings.
How to Set Alarm Clock
- In normal clock display mode, press and hold the clock display area to enter the alarm setting state. Use short presses to adjust hours and minutes.
- Press and hold the button for 3 seconds to check the successful setting of the alarm clock.
Frequently Asked Questions (FAQ)
- Q: What type of adapter is required for this product?
A: This product requires a 9V/3A adapter. Using a 4-core TYPE-C data cable over 3A is recommended, as ordinary 5V adapters may not work properly.
5 in 1 Wireless charging/clock/night light
Thank you very much for choosing our product
Please read the User Manual carefully before using the product
Features
- Night light.
- Clock alarm.
- Wireless fast charging.
- Charging distance ≤ 6mm.
Appearance features
- Smartphone magnetic wireless charging station
- AirPods wireless charging station
- iWatch wireless charging station
- RGB LED night light
- Clock display area
- Charging indicator
- Type-C input interface
How to operate
-
Connect the USB port of the USB cable to the 30W charger and connect the Type-C port to the wireless charger. The working indicator light flashes red and blue alternately, and the red light remains on for a long time to indicate that the device is normal.
Note : This product requires a 9V/3A adapter. The 4-core TYPE-C data cable over 3A does not support 5V ordinary adapters. If you use an ordinary 5V adapter, it will not work properly. -
Place the smartphone in the magnetic wireless charging position, and the charging indicator light shows a blue light that remains on until it enters the charging state.
Night light function
- Once touch LED night light switch to turn on the warm light.
- Second touch it to changed RGB colorful LED night light.
- Touch it again, switch to turn off the LED light.
Key Function
How to set the clock
In normal clock display mode:
-
Press and hold the【 】clock button for 3 seconds. After the clock starts flashing it will enter the clock setting state.
Press 【 】 1 second to increase the number, or press 【 】 to decrease the number. -
Press and hold the 【 】clock button again for 3 seconds to toggle minutes. After the minutes start flashing, it will enter the minute setting state.
Press 【 】 1 second to increase the number, or press 【 】 to decrease the number. -
Press and hold the 【 】 clock button for 3 seconds to save the current settings and return to the time display.
How to set the alarm clock
In normal clock display mode:
-
Press and hold the【 】 clock display area, the clock starts flashing and then enters the alarm setting state.
Press 【 】 1 second to increase the number, or press 【 】 to decrease the number. -
Press and hold the【 】 again to switch the minutes, the minutes will start to flash and enter the minute setting state.
Press 【 】 1 second to increase the number, or press 【 】 to decrease the number. and wait 5 seconds for successful setting. -
Press the【 】 3 seconds to set button to check whether the alarm clock is set successfully. If not, “–” will be displayed.
-
Press and hold the【 】 setting button 3 times in succession to cancel the alarm (press and hold for 3 seconds each time).
Alarm clock attention
In normal clock display mode:
- 1. In 12-hour mode, 【 】 will adjust the alarm display time according to the A/P icon prompt.
Snooze
- When the alarm sounds, short press the alarm button once to turn off the alarm. If not turned off the alarm clock, it will sound for 1 minute. Wait for 5 minutes later ring again.
Adjust screen brightness
In normal clock display mode:
- Short press 【 】 to adjust the clock screen brightness High brightness – low brightness – off cycle to adjust the screen brightness.
- Press and hold the【 】 3 seconds to switch between 12/24 hours. If the display icon is A means morning, and if the display icon is P means afternoon.
Wireless charging specifications
- Product material: imported ABS+PC+zinc alloy
- Power input: DC9V-3A 12V-2.5A
- Charging efficiency: 75%
- Smartphone wireless charging output power: 5W/7.5W/10W/15W AirPods/
- Earbuds wireless charging output power: 5W
- Watch wireless charging output power: 1~3W
- Product size: 203x130x93mm
- Power charging port: Type-C port
Applicable equipment
- This product is a 5 in 1 fast wireless charger.
- It can wirelessly charge smartphones/iWatch/TWS Bluetooth Earbuds/ AirPods that support Ql standard at the same time.
- This product also adds a night atmosphere lighting design, making it a convenient and practical smart device.
- Place the corresponding device in the charging area to wirelessly charge the device.
- You can place your phone vertically or horizontally without affecting the charging of your phone.
- You can video chat or watch your favorite movies and TV shows while charging.
Precautions
- Do not use or store this product in direct sunlight or high temperature for a long time.
- Do not charge too close to magnetic cards, magnetic recording media, and precision instruments.
- Do not disassemble or modify this product.
- Do not touch the AC adapter with wet hands.
- Please keep this product away from water or other liquids.
- If you want to clean this product, please turn it off.
- Product working environment temperature range: -20-35℃.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
MADE IN CHINA